Annual Rate Contract For Misc. Civil Work In Dwarka, Jamnagar, & Kutch District.; 1 Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work CMT 40.00 1,030.81 41,232.24 2 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area. EACH 30.00 182.94 5,488.24 3 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Loose or Soft soil CMT 40.00 117.08 4,683.17 4 Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (upto 10 ton) CMT 30.00 2,632.33 78,969.98 5 Providing & Laying cement concrete M-200 and curing comp. incl. the cost of form work but exl. The cost of reinforcement for reinforced work in flooring slabs and curing incl. cost of form work. Compaction and finishing of cement concrete road by trimix process incl. of labour chardes for the trimix vaccum dewatering process on cement concrete road surface by using vaccum dewatering pump, surface water floater, surface vibrator icnl. channelling & making grooves and rough finish to surface by providing expansion joints, contraction per specification. As Per R.A. CMT 80.00 6,283.15 5,02,651.95 6 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./ Sq.Cm. in foundation and plinth in Cement Mortar 1:5 (1- Cement : 5 -fine sand) (B) Conventional (upto 10 ton) CMT 2.00 4,051.78 8,103.55 7 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1- cement : 1-sand) etc. complete. SMT 400.00 300.66 1,20,262.72 8 Filling in plinth with sand under floors includingwatering ramming, consolidating and dressing complete CMT 40.00 442.49 17,699.64 9 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. CMT 60.00 282.02 16,921.34 10 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density. (i) For 45 to 63 mm size metal and Lead 60km. (As Per R.A) CMT 1,000.00 1,367.68 13,67,681.40 11 Rolling and comsolidation of soling including filling in depression which occur during the process, with power roler 8 tonne to 12 tonne SMT 1,000.00 22.36 22,361.40 12 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. SMT 50.00 684.14 34,207.19 13 Providing and fixing Fly proof galvanised M.S. wire gauge of I.S.l gauge designation 85 G. with wire of dia.0.56 mm to windows and celevating windows including 60 x 20mm beading of teak wood. SMT 60.00 669.94 40,196.59 14 Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete. RMT 600.00 23.68 14,210.70 15 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. RMT 30.00 91.84 2,755.18 16 Applying general insecticide pest control treatment to floors, cupboards etc including labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II (0.075% concentration by mass) is recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical /Sqm of surface is recommended as per I.S. SMT 300.00 89.28 26,785.20 17 Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on wall surfaces of given an even shade, over and including a priming coat of whiting after thoroughly brooming the surface free from mortar dropping and other foreign matter. SMT 800.00 48.84 39,074.88 18 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete SMT 250.00 114.53 28,633.50 19 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter SMT 5,000.00 87.81 4,39,047.00 20 Providing & fixing Profile colour coated sheet canophy weather shade size 3*1 Mtr and etc complete...(I) 0.60 mm. thick sheet. As Per R.A. SMT 200.00 3,005.76 6,01,152.00 21 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths interlocked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for inside and outside locking with push-pull operation including the cost of hood cover and spring etc. complete.(A)Shutters having width below 3.5 M. SMT 50.00 3,503.41 1,75,170.36 22 Providing TMT Bar FE 500D reinforcement for R.C.C.work including bending, binding and placing inposition complete upto floor two level KG 3,000.00 76.21 2,28,643.80 23 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand) brick work in superstructure above plinth level upto floor two level(B)Conventional CMT 20.00 4,289.33 85,786.57 24 Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C)Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto floor two level. CUM 20.00 4,420.60 88,411.97 25 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) SQM 600.00 171.80 1,03,080.60 26 Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan EACH 2.00 38.99 77.97 27 Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover EACH 2.00 291.33 582.67 28 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each EACH 2.00 282.16 564.33 29 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size. EACH 2.00 603.19 1,206.38 30 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia. EACH 4.00 186.83 747.32 31 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(ii) 25mm dia EACH 2.00 263.77 527.54 32 Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or higned grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet.(C) 100mm dia. EACH 5.00 606.08 3,030.40 33 Providing and fixing in position with clamps etc. 32mm nominal internal diameter galvanised steel tube flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors. RMT 5.00 341.84 1,709.22 34 Providing panel wall for dry stone pitching in uncourased rubble masonary with had stone of approved quality in cement. mortar 1.5 including curing etc, complete. CMT 20.00 2,524.53 50,490.51 35 Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc SMT 25.00 1,583.95 39,598.82 36 Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. SMT 100.00 34.68 3,468.34 37 White washing with lime on wall surface (two coats) to give an even shade including thoroughly booming the surface to remove all dirt, dust; mortar drops and other foreign matter. SMT 300.00 12.09 3,626.91 ..... more in document
