|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed. |
| 3 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed. |
| 4 | Taking down & Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening complete all as specified and directed. |
| 5 | S&F for Powder coated aluminium (minimum thickness of powdercoating 50 micron) frame/shutter work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including roller for sliding window, handle, locking device, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete as per directions of Engineer-in-Charge. |
| 6 | S&F for anodised aluminium expanded metalmesh of any size/shape for window/ventilator fixed in Aluminium frame with aluminium snap beading, screws etc. all as specified and directed. |
| 7 | S&F for 5.0 mm thick sheet glass, selected quality (Tinted) and fixed to aluminium door/window/partation in square exc/ n\"exc 0.5 sqm in each pane complete all as specified and as directed. |
| 8 | S&F for 5.0 mm thick sheet glass, selected quality (Frosted) and fixed to aluminium door/window/partation in square exc/n\"ec 0.5 sqm in each pane complete all as specified and as directed. |
| 9 | S&F for stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with aluminium snap beading complete all as specified and directed. |
| 10 | M&L for Prelaminated particle board 12mm thick , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to any frame work complete all as specified and directed. |
| 11 | M&L for Mild steel farmed work as in doors (as in chowkhats) or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-290 including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed. |
| 12 | S&F for 35 mm thick flush shutters, boardsolid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 13 | S&F for 35 mm thick 2nd class hard wood (Hollock/Sal/Bijasal), locally febricated glazed skeleton doorshutters open rebated and prepare to receive glass, gauge (without sash bars) edges of framing plain chamfered or rounded, fitted with cut including mitred beads for securing glass etc sizes of members of shutters as specified inSSR Part-I section 8, clause No 8.24 (a) complete all as specified and directed. |
| 14 | S&F for Solid PVC door frame for PVC doors, Kitchen cabinet of size 50mm x 47mm made out of 5mm PVC sheet reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed. |
| 15 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II) |
| 16 | S&F in repairs Stainless steel wire cloth, 0.71 mm nominal dia of wirefixed with tinned tacks, of 20mm meshof stainless steel wire staples complete all as specified and directed. |
| 17 | S&F for 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 18 | S&F for 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 19 | S&F for 100 mm long stainless steel hinges type B-12 complete all as specified and directed. |
| 20 | S&F for 75 mm long stainless steel hinges type B-12 complete all as specified and directed. |
| 21 | S&F for 50 mm long stainless steel hinges type B-12 complete all as specified and directed. |
| 22 | S&F for 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 23 | S&F in repairs PVC door( back side) stopper 75mm long complete all as specified and directed. |
| 24 | S&F for 2nd class Hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joint. complete all as specified and as directed. |
| 25 | M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamealle paint over a coat of pink primer. complete all as specified and as directed. |
| 26 | M&L for prepariation of newly steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 27 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed. |
| 28 | M&L for Pre-cast cement concrete block masonry with solid blocks type C1 1:3:6 (20mm garded agge) , exc. 10 cm in width and setting in mortar complete all as specified and directed. |
| 29 | Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 30 | M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed. |
| 31 | M&L for rendering 10mm thick in CM 1:4 on ceiling surface finishedeven and smooth without using extra cement complete all as specified and directed. |
| 32 | M&L for Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over a coat of average 1mm thick wall care putty on new plastered surfaces complete all as specified and directed. |
| 33 | M&L for applying two coats of oil bound distemper with roller on old decorated wall surfaces over 1 mm thick white putty including complete removalof existing treatment with mechanical complete all as specified and directed. |
| 34 | M&L for applying three coats of white wash on wall including preparation of new plastered or un-plastered surfaces of walls, complete all as specified and directed. |
| 35 | M&L for applying three coats of white wash on ceiling including preparation of new plastered or un-plastered surfaces, complete all as specified and directed. |
| 36 | M&L for complete removal of extg treatment with mechanical device of oldplastered surfaces of wall and applying two coat of white wash (match with new surface) complete all as specified and directed. |
| 37 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 38 | M&L for coloured glazed ceramic tilesin vertical surface 350 x 250 x 7 mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed . |
| 39 | M&L for glazed ceramic non skid joint free coloured tiles (1st quality/ premium quality) 7 to 8 mmthick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqmas in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) as in (toilet,bath,kitchen, passage floor) complete all as specified and directed. |
| 40 | M&L for glazed ceramic non skid joint free coloured tiles(1st quality/premium quality) 7 to 8mmthick (square/rectangular) area of each tile exceeding 0.11Sqm but not exc. 0.18 Sqmas in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6)as in (bed room and other room floor) complete all as specified and directed. |
| 41 | M&L for glazed ceramic non skid joint free coloured tiles(1st quality/premium quality) 7 to 8mmthick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqmas in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6)as in (bed room and other room floor) complete all as specified and directed. |
| 42 | M&L for Virified Ceramic tiles light shade 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cment mortar (1:6) as in (bed room and other room floor) complete all as specified and directed. |
| 43 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 44 | M&L for PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in path/plinth protection( 75 mm thick ) laying in alternate ways finished even and fair without using extra cement all as specified. |
| 45 | S&F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 46 | S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed. |
| 47 | S&F in repair 15 mm bore CP Stop valves/ Angle valves, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified & directed. |
| 48 | S&F in repair 15 mm bore CP concealed Stop valves, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified & directed. |
| 49 | S&F in repair 15mm bore, brass chromium plated pillar cock (foam flow)two ways screwed down for pipe and fixed complete all as specified and directed. |
| 50 | S&F in repairs 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screw shanks screwed for iron pipe or union complete all as specified and as directed. |
| 51 | S&F in repairs Vitreous china wash basin white flat back size 550 x 400mm incl waste pipe chain plug brackets complete all as specified and directed.. |
| 52 | Taking up or down 15mm bore steel tubing and connection complete all as specified and directed. |
| 53 | All as per item No-52above but 20mm bore complete all as specified and directed. |
| 54 | S&F for steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed. |
| 55 | S&F for steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed. |
| 56 | Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc brick wall complete all as specified and directed. |
| 57 | S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with \"P\" or \"S\" trap front or back inlet including footrest (excluding fluxing cistern and flush pipe)complete all as specified and directed. |
| 58 | S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 59 | S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 60 | S&F for 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 61 | S&F for 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 62 | S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed. |
| 63 | S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm bore suitable for wash hand basincomplete all as specified and directed. |
| 64 | S&F in repairs 32 mm dia PVC waste pipe for wash basin /sinks min 1.00mlong complete all as specified and directed. |
| 65 | S&F in repairs 600x450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 66 | S&F in repairsplate rack of 1mm thick stainless steel of size 900x600mm with three shelves complete all as specified and directed. |
| 67 | S&F in repair tubular towel rail stainless steel20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 68 | S&F in repairs CP shower rose 125mm dia alongwith shower arm complete all as specified and directed. |
| 69 | S&Fin repair 150 mm square PTMT grating with openable flap (Min weight 100 gms) complete all as specified and directed. |
| 70 | S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard andrailing 60cm long complete all as specifiedand directed. |
| 71 | S&F in repairs125mm long aluminium anodised Hasp and Staple, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 72 | S&F for Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 290 complete all as specified and directed. |
| 73 | S&F in repairs Stainless steel 40mm dia decorative knob for kitchen cup board complete all as specified and directed. |
| 74 | S&F in reapirsBrass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed. |
| 75 | S&F in repairs Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 76 | S&F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 77 | S&F in repairs mild steel PVC coated drapery rods, 25mm internal diameter including decoratine type brackets and PVC curtain rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed. |
| 78 | M&L for Varoda green marble stone 18 to 20 mm thick in steps, pillars, wndow cills, pillars, window cills, cooking platforms and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 79 | S&F for 5.0 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane incl dismanling damage glass complete all as specified and directed. |
| 80 | Cleaning of roughened surface of sunken floor by brushing with wire brush to remove all dirt and applying a coat of cement slurry with 3.00 kg of cement per sqm and rendering 15mm thick in CM 1:3 using WPC finished rough (Sunken floor/Wall) and then applying two course treatment as follow:- (i) Applying bitumen primer @ 0.40 Kg/Sqm.(ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3.50 kg/Sqm with 100 GSM/Sqm non woven polyster mat as centre core reinforcement , laid with 75mm side over lap and 100mm end over lap sealed and finsihed neat. (iii) 40mm bore GI pipe for Spout pipe length 0.75m. |
| 81 | M&L for broken bricks loose filling with aggregates of gauge 40 to 80mm in sunken protioncomplete all as spd and dir by Engineer-in-Charge. |
| 82 | S&F in repairs 75x125mm dia of PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed. |
| 83 | M&L for Machine cutkota stone slab flooring 20-25mm thick over cement screedbase laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including20mm thickscreed bed CM (1:6) complete all as specified and directed. |
| 84 | M&L for Machine cut kota stone 12 to 15 mm thick as in riser of step, skirting,dado and pillar etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding andpolishing laid over and including15mm thick rendering CM (1:4) complete all as specified and directed. |
| 85 | Hacking out old broken glasses any thickness size, quality or description from metalframes including punching or drilling out old glazing pins / spring clips and providing and fixing new ones. hacking any bldg hight complete all as specified and as directed. |
| 86 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc. ) or insulation boards/ slabs/blankets, any thickness, including cover fiilets complete all as specified and directed. |
| 87 | M&L for 4 mm thick 595 x 595 mm eco board classic as in false ceiling incl powdr coated incl Gi grid system and adjustabe suspender and fastening arrangement complete all as specified and directed. |
| 88 | S&F in repairs floor door stopper ( overall length of cover plate140 mm) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in repairs in floors. complete all as specified and as directed. |
| 89 | S&F in repairs 15 mm bore brass cp wall mixer for mixing hot and cold water screwed down for iron pipe complete all as specifed and directed. |
| 90 | S&F in repairs 15 mm bore brass cp WHB mixer for mixing hot and cold water screwed down for iron pipe complete all as specifed and directed. |
| 91 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) with any type of \"P\" or \"S\" trap excludingflushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device. complete all as specified and as directed. |
| 92 | S&F in repairswater tank cover of capacity up to 1000 ltrscompletete all as specified. |
| 93 | S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 94 | S&F in repaire PVC Cabinet mirror size 650 x450 with selected quality glass complite all as specified and directed. Make - Atul/Modi or equvalent |
| 95 | S&F in repaire chromium plated jet for pedestal pattern WC screwed down high pressure complite all as specified and directed. |
| 96 | S&F in repaire chromium plated health faucet 15 mm dia screwed down high pressure 1.8 mtr tube & hookcomplite all as specified and directed. Make - Jaguar, Code-ALD CHR 583. |
| 97 | S&F in repairs Mortice lock brass, vertical type, size 100mm 4 lever for alluminium door complete all as specified and directed. |
| 98 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixedcomplete all as specified and directed. |
| 99 | Demolition of cement concrete (reinforced) in roofs,platforms, floors(otherthan ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 100 | M&L for reinforced cement concrete type B-0, 1:2:4 (using 12.5 graded granite stone aggr) in Chajjas etc complete all as specified and directed. |
| 101 | Rough finished flat form wok to Chajjas , Chullah hoods, water troughs andsimilar items incl sdges and formwork incl necessary struts,scaffolding etc complete all as specified and directed. |
| 102 | M&L forMild steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 103 | M&L for two coats of plastic emulision paintpaint over a coat of primer/ wall care putty in different tint and similer works including complete removal of existing treatment and prepration of old plastered surface complete all as specified and directed. |
| 104 | S&F for 18 mm thick Rajshree Celuka ply of grade 1 quality of one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters complete as per specification and as directed by Engineer-in-Charge. |
| 105 | S&F for Stone wall/floor cladding with jaisalmer yellow stone having minimium 18mm thickness including outer face properly polished and fixed on wall with fastner and adhesive with CM 1:3 and all holes should be filled with coloured cement/ chemicalto match the stone colour washing of complete preparedwith mixture of water and acid followed by coloured cement polishing to match the natural texture of stone including demolition of extg stone fixed portion complete all as specified and directed. |
| 106 | S&F in repairs 3.0mm thick ACP (Aluminium Composite Panel)fixed in ceiling and wall complete all as specified and directed. |
| 107 | S&F in repairs full length bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC/PVC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 108 | M&L in repairs 12mm thick plain/froasted toughened glass door including stainless steel door handle 300mm long decorative type incl all necessary connected fittings and fixtures for door all as specified and directed. |
| 109 | S&F in repairs for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 110 | Excavating in trenches n exc 1.5m wide and n exc1.5 m in depth for foundation etc and getting out soft /disintigrated rock complete all as specified and directed. |
| 111 | M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation for concrete as in trenchs, post,struts complete all as specified and directed. |
| 112 | M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths)as in other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, complete all as specified and directed. |
| 113 | S&F in repairs vitreous china full stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flishing cistern with brackets, flush pipe, grating and union for discharge pipe(exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).Make - Prayag/Parryware/Hindware |
| 114 | M&L for applying one coat of epoxy resin (FAIR BOND EP) on old concrete surfaces @ 0.30Kg/Sqm including preparation of surfaces as per manufacturer\"s instructions and applying 25mm thick (average thickness) of cement ,sand & Aggregate(1:1.5:3) in ratio aggregate n\"less than 6mm size mixed with chloride freeconcrete plasticiseras per manufacturer\"s instruction with guniting applying manualand finished the surface even and smooth complete all as specified and directed.(Manual applied)Make - Fairmate chemicals or equivalent make of SIKA/BASF/FOSROC. |
| 115 | S&F for galvanised welded steel wire fabric as extra reionforcement to RCCmembers likeceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste (wt not exc 4.00 kg/Sqm)complete all as specified and directed. |
| 116 | M&L for removing of rust from existing steel surfaces with rust removrs of SIKA Rustoff 10 appliedtwo coats @ 0.15Ltr/Sqm per coat and cleanng all rust with steel wire brush and washed with wter/chemical complete all as spd and dir byEngineer-in-Charge.Make - SIKA/BASF/FOSROC |
| 117 | M&L for application of Anti corressive coating with SIKA Rustoff friazinc on the exposed reinforcement proper mix applied @ 0.25 Ltr Sqm of exposed steel surface as per manufacture\"s instruction complete all as spd an dir by Engineer-in -Charge. Make - SIKA/BASF/FOSROC |
