|
| 1 | M&L Preparation and cleaning old surfaces using wire brushes/sand paper in old decorated surface of ceiling and applying one coat of white wash complete all as specified and directed. |
| 2 | M&L preparation of old treated surfaces of walls and applying one coat of white wash.complete all as specified and directed. |
| 3 | M&L preparation of old decorated surface of ceiling and applying one coat of acrylic distemper any tint complete all as specified and as directed by Engr-in-Charge. |
| 4 | M&L complete removal of existing treatment of any description and applying 1.5 mm thick wall care puttyand rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylicdistemper over a coat of primer complete all as specified and as directed. |
| 5 | M&L preparation of old painted surfaces andapplyingone coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed. |
| 6 | M&L preparation of old painted surfaces andapplyingone coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed. |
| 7 | M&L preparation of old painted surfaces andapplyingone coat of synthetic enamel paint on brick,concrete,stone of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed. |
| 8 | M&L preparation of old painted surfaces andapplyingone coat of synthetic enamel paint on steel surfaces of any description not Exc 10 cm width or grith etc complete all as specifed and as directed. |
| 9 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing downwith water etc.complete all as specified and directed. |
| 10 | Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles.complete all as specified and directed. |
| 11 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and as directed. |
| 12 | M&L 10mm thick rendering in cement mortor 1:6 on fair faces of brick work and finishing surface even and smooth without using extra cement complete all as specified and directed. |
| 13 | Material and labour for preparation of newly plastered/putty wall surfaces and applying two coats of acrylic distemper 1st quality over a coat of wall care putty (1.5 mm thick) complete all as specified and as directed. |
| 14 | M&L rendering5mm thick cement plaster in cm 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and as directed. |
| 15 | M&L preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed. |
| 16 | S&F Sheet glass 3.0 mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones |
| 17 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing with 4.8mm thick,ordinary quality & glazing with oil putty in squaren.exc 0.50 Sq.m in each pane and glazing with oil putty in square, complete all as specified and as directed. |
| 18 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing andfixing with Rough cast wired glass,6.4mm thick, exc. 0.75Sqm but n.exc 1 Sq.m in each pane and glazing with oil putty in square, complete all as specified and as directed. |
| 19 | S&F in repair Aluminium (extruded section) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg.complete all as specified and directed. |
| 20 | Resecuring or easing & adjusting, with taking down Shutters of any description n exc 1 sq.m each and refixing in same opening .complete all as specified and directed. |
| 21 | Resecuring or easing & adjusting, with taking down Shutters of any descriptionexc 1 sq.m but n exc 2 sqm each and refixing in same opening.complete all as specified and directed. |
| 22 | S&F in repair stainless steel Butt hinges 100mm size, medium weight.complete all as specified and directed. |
| 23 | S&F in repair extrudedAluminium alloy handles 150mm size, cast type, anodised.complete all as specified and directed. |
| 24 | S&F in repair Aluminium, anodised, barrel tower bolts 150mm long of extruded section.complete all as specified and directed. |
| 25 | Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.complete all as specified and directed. |
| 26 | S&F anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm, complete all as specifed and as directed. Fixed with 16 guage wire complete all as specified and as directed |
| 27 | S&F 4 mm thick non asbestos fibre cement building boardsof fancy type/designer type & pre-painted)fixed or laid/inserted to timber/GI/Aluminium frame work, complete all as specifed and as directed. |
| 28 | S&Ftubes 15mm bore, medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors (concealed) complete all as specified and as directed. |
| 29 | S&F tubes 20mm bore, medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors (concealed) complete all as specified and as directed. |
| 30 | Taking up or down steel tubing and connections, 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 31 | Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 32 | Demolition of cement concrete of any description and in any position not otherwise specially privided for (unreinforced) complete all as specified and as directed. |
| 33 | M&L 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) finished fair and even without using extra cement as in sub-floors, sub-bases, floors, pavings etc |
| 34 | M&L Forming Construction (Dummy joints 50mm deep x 10mm wide, filled with sealing compound of Grade A.complete all as specified and directed. |
| 35 | S&F in repair Sheet glass 4.80 mm thick with solar control film 25micron reflective type sticked to glass pane as per manifactures instruction, ordinary quality & glazing with oil putty in square but n.exc 0.5 sq.m in each pane.complete all as specified and directed. |
| 36 | S&F in repair Sheet glass 4.80 mm thick with solar control film 25micron reflective type sticked to glass pane as per manifactures instruction, ordinary quality & glazing with oil putty in square but exc 0.5 sq.m in each pane |
| 37 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.complete all as specified and directed. |
| 38 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.complete all as specified and directed. |
| 39 | M&L screed or bedding layer 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified and as directed. |
| 40 | M&L Rendering 10mm thick in cement mortar 1:3 finished even and fair on vertical surfaces on walls for fixing of dado / skirting tiles |
| 41 | M&L Light Shade Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and directed. |
| 42 | M&L Light Shade Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each not exceeding 0.36 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and directed. |
| 43 | M&L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed. |
| 44 | M&L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed. |
| 45 | M&L Glazed ceramic coloured tiles in vertical surface450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as directed. |
| 46 | M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabcomplete all as specified and as directed. |
| 47 | M&L kota stone slab 20-25 mm thick in riser of steps,skirting, dado and pillar laid over screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab and complete all as specified and as directed. |
| 48 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs,floor, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite.complete all as specified and as directed. |
| 49 | Rounding to edges of stone slab one edge, such as in steps, cooking platform, and other similar situation.complete all as specified and directed. |
| 50 | S&F in repairs coloured vitreous China wash basin, white, flat back, size 550 x 400mm including pedestal, waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed andbrackets including cutting for and pinning in ends of brackets or erecting stand etc. all as specifiedand directed. |
| 51 | S&Fin repairs 15mm bore fancy type CP Pillar taps fancy type screwed down high pressure, with or without lettered \"Hot\" or cold with long screwed shanks and fly nuts, screwed foriron pipe and fixed complete all as specified and as directed.o (Cat part no:VGP-81001) of make Jaguar/equivalent of Hindware,Kohler,Prayag |
| 52 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass of 5.5mm thick, mounted on 6mm thick AC building board and fixed to wall with wooden plugs with & including chromium plated brass screws and cup washers complete all as specified & as directed. |
| 53 | S&Fin repairs Vitreous China wash down water closet pan (pedestal pattern), white/coloured (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. |
| 54 | S&F in repair Plastic water closet seat,(white colour), closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devicefor pedestal pan complete all as specified and as directed. |
| 55 | S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern to squatt pattern all as specified and as directed. |
| 56 | S&F in repairs Vitreous China Urinal, Half stall type, white/coloured (excluding flushing cistern, flush pipe and waste pipe)including providing fixing plugs bedding urinal against wall etc all as specified and directed . |
| 57 | S&F grating doom 125 mm dia of PTMT (minimum weight 25gms ) complete all as specified and directed. |
| 58 | S&F in repairs Health faucet of (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position all as specified and as directed |
| 59 | S&F in repairsPVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ballvalvefloat and handle including brackets complete all a specified and as directed. |
| 60 | S&Fin repairsCP fancy type bip cock with wall flange 15mm screw down for iron pipe or for brass ferrule complete all as specified and as directed. (Cat Part no:-VGP-81037) of Jaguar/Eqivalent of Hindware,Kohler etc. |
| 61 | S&Fin repairs fancy type CP stop cock/angle cock (concealed type) with wall flange ,15mm screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and as directed.(Cat Part no:- VGP-81053) of Jaguar/equivalent of Hindware, Kohler |
| 62 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min. weight 60gms) |
| 63 | S&Fin repairs PVC connections 15mm size withPTMT nuts of length 450mm complete all as specified and as directed. |
| 64 | S&F in repairs high density polyethylene pipe (HDPE), 32 mm dia for WHB or sink complete all as specified and as directed. |
| 65 | S&F in repair Towel rail fancy type cromium plated 20 mm dia decorative fancy D type 60 cmlongall as specified fixed . |
| 66 | S&F in repair Waste coupling 40mm bore of PTMT (half or full threaded) min. weight 40mm-60 gms) .complete all as specified and as directed. |
| 67 | S&F in repair Waste coupling 32mm bore of PTMT (half or full threaded) suitable for urinals (min. weight 32mm-45gms).complete all as specified and as directed. |
| 68 | Taking down chowkat or frames exc 1.5 sqm but n exc 4.0 sqm each with shutter (without taking off shutters from the frame).complete all as specified and as directed. |
| 69 | Taking down chowkat or frames nexc 1.5 sqm each with shutter (without taking off shutters from the frame).complete all as specified and as directed. |
| 70 | S&F Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 71 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichamberedframe, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steels crews etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 72 | S&F 5mm thick figured glass,pin head type and glazing with oil putty in squares n.exc 0.50 Sq.m in each pane. |
| 73 | S&F 5mm thick figured glass,pin head type and glazing with oil putty in squares exc 0.50 Sq.m in each pane. |
| 74 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 75 | S&F Sheet glass 4.8 mm thick, tinted type, ordinary quality & glazing with oil putty in square n. exc 0.5 sq.m in each pane.complete all as specified and as directed. |
| 76 | S&F in repair brass 4-levers mortice lock, vertical type , size 100mm complete all as spcified and as directed. |
