|
| 1 | ALL KINDS OF SOIL |
| 2 | CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE |
| 3 | THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE) |
| 4 | \"FOUNDATIONS, FOOTINGS, BASES OF COLUMNS, ETC. FOR MASS CONCRETE.\" |
| 5 | CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. |
| 6 | \"FOUNDATIONS, FOOTINGS, BASES OF COLUMNS, ETC. FOR MASS CONCRETE.\" |
| 7 | CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. |
| 8 | \"FILLING BY AVAILABLE EXCAVATED EARTH (EXCLUDING ROCK) IN TRENCHES, PLINTH, SIDES OF FOUNDATIONS ETC. IN LAYERS NOT EXCE |
| 9 | CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE |
| 10 | \"LINTELS, BEAMS, PLINTH BEAMS, GIRDERS, BRESSUMERS AND CANTILEVERS.\" |
| 11 | CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. |
| 12 | MOORUM/HARD COPRA |
| 13 | CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE |
| 14 | CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. |
| 15 | \"LINTELS, BEAMS, PLINTH BEAMS, GIRDERS, BRESSUMERS AND CANTILEVERS.\" |
| 16 | CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. |
| 17 | CEMENT MORTAR 1:4 (1 CEMENT : 4 COARSE SAND) |
| 18 | CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. |
| 19 | \"LINTELS, BEAMS, PLINTH BEAMS, GIRDERS, BRESSUMERS AND CANTILEVERS.\" |
| 20 | CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. |
| 21 | 1:4 (1 CEMENT: 4 SAND) |
| 22 | \"PROVIDING AND APPLYING 1.0 MM THICK WHITE CEMENT BASED WALL PUTTY OF BEST QUALITY, OVER PLASTERED SURFACE TO PREPARE TH |
| 23 | NEW WORK (TWO OR MORE COAT APPLIED @ 1.67 LTR/10 SQM OVER AND INCLUDING PRIMING COAT OF EXTERIOR PRIMER APPL |
| 24 | \"PROVIDING AND LAYING VITRIFIED FLOOR TILES (WITHOUT SOLUBLE SALT) OR PRINTED (WITH SOLUBLE SALT) NANO POLISHED (GLOSSY |
| 25 | KOTA STONE 25MM THICK FLOORING OVER 20 MM (AVERAGE) THICK BASE LAID OVER AND JOINTED WITH GREY CEMENT SLURRY MIXED WITH |
| 26 | RED SAND STONE |
| 27 | \"WEATHER SHADE, CHAJJAS, CORBELS ETC., INCLUDING EDGES\" |
| 28 | \"SUSPENDED FLOORS, ROOFS, LANDINGS, BALCONIES AND ACCESS PLATFORM.\" |
| 29 | AREA OF SLAB UPTO 0.50 SQM |
| 30 | POLYESTER POWDER COATED ALUMINIUM (MINIMUM THICKNESS OF POLYESTER POWDER COATING 50 MICRON) |
| 31 | POLYESTER POWDER COATED ALUMINIUM (MINIMUM THICKNESS OF POLYESTER POWDER COATING 50 MICRON) |
| 32 | WITH FLOAT GLASS PANES OF 4.0 MM THICKNESS |
| 33 | 125 MM |
| 34 | WITH 2ND CLASS TEAK WOOD BEADING 62X19 MM. |
| 35 | TWO COATS. |
| 36 | PAINTING STEEL WORK WITH DELUXE MULTI SURFACE PAINT TO GIVE AN EVEN SHADE. TWO OR MORE COAT APPLIED @0.90 LTR/ |
| 37 | 20 MM NOMINAL OUTER DIA .PIPES. |
| 38 | 32 MM NOMINAL OUTER DIA .PIPES. |
| 39 | \"WHITE VITREOUS CHINA DUAL PURPOSE WC PAN WITH WHITE SOLID PLASTIC SEAT AND LID WITH WHITE VITREOUS CHINA FLUSHING CISTE |
| 40 | \"WHITE VITREOUS CHINA FLAT BACK WASH BASIN SIZE 550X400 MM WITHSINGLE 15 MM C.P. BRASS PILLAR TAP.\" |
| 41 | ORISSA PATTERN W.C. PAN OF SIZE 580X440 MM |
| 42 | \"WHITE VITREOUS CHINA SURGEON TYPE WASH BASIN OF SIZE 660X460 MM WITH A PAIR OF 15 MM C.P. BRAS |
| 43 | SINGLE HALF STALL URINAL WITH 5 LITRE P.V.C. AUTOMATIC FLUSHINGCISTERN. |
| 44 | \"C.P.BRASS FITTINGPROVIDING AND FIXING C.P. BRASS BIB COCK OF APPROVED QUALITY CONFORMING TOIS:8931 - 15 MM NOMINAL BO |
| 45 | PROVIDING AND FIXING C.P. BRASS STOP COCK (CONCEALED) OF STANDARD DESIGN AND OF APPROVED MAKE CONFORMING TO IS:8931. - 1 |
| 46 | \"PROVIDING AND PLACING ON TERRACE AT ALL FLOOR POLYETHYLENE WATER STORAGE TANK ISI : 12701 MARKED WITH COVER AND SUITABL |
| 47 | \"PROVIDING AND LAYING 60MM THICK FACTORY MADE CEMENT CONCRETE INTERLOCKING PAVER BLOCK OF M-30 GRADE REFLECTIVE TYPE RUB |
| 48 | NOS OF BAG@410 KG OR 8.2BAGS PER CUM |
| 49 | 160 MM DIAMETER OD |
| 50 | 110MM DIA |
| 51 | 100 MM INLET AND 75 MM OUTLET |
| 52 | 110MM DIAMETER |
| 53 | 110X110X110 MM |
| 54 | 110 MM BEND |
| 55 | DARK SHADE USING ORDINARY CEMENT. |
| 56 | LIGHT POINT/FAN POINTS. SHORT POINT |
| 57 | LIGHT POINT/FAN POINTS. MEDIUM POINT |
| 58 | LIGHT POINT/FAN POINTS. LONG POINT |
| 59 | \"POINT WIRING INCLUDING METALLIC SWITCH BOX, SHEET, SWITCHE, SOCKET FOR 3 PIN 6 AMP. SOCKET OUTLET POINT WITH 1.5 SQ. MM |
| 60 | ON SEPARATE BOARD SHORT POINT |
| 61 | ON SEPARATE BOARD MEDIUM POINT |
| 62 | ON SEPARATE BOARD LONG POINT |
| 63 | ON SEPARATE BOARD. EXTRA LONG -I |
| 64 | ON SEPARATE BOARD EXTRA LONG -II |
| 65 | ON SEPARATE BOARD EXTRA LONG -III |
| 66 | 3 X 2.5 SQ MM |
| 67 | 3 X 4.00 SQ MM |
| 68 | 6.0 SQ MM CABLE IN 25 MM CONDUIT |
| 69 | 10.0 SQ MM CABLE IN 25 MM CONDUIT |
| 70 | 6 AMP TO 32 AMP RATING |
| 71 | FOR 40 AMPS. RATING ONLY. DOUBLE POLE (DP) |
| 72 | 50 AMP TO 63 AMP RATING FOR TRIPLE POLE & NEUTRAL(TPN) |
| 73 | 16 WAY DOUBLE DOOR |
| 74 | 4 WAY DOUBLE DOOR |
| 75 | \"FIXING OF MCB /MCCB ISOLATOR TP /TPN/FP IN SHEET STEEL ENCLOSUREAS REQUIRED AS PER ACCEPTED PRACTICE, INCLUDING MOUNTI |
| 76 | \"FOR S.NO :-8.5(6) & 8.5(7), 8.6(6) TO 8.6(7), 8.7(2) TO 8.7(3) & 8.8(1) TO 8.8(3)\" |
| 77 | 450 WATT |
| 78 | CEILING FAN (ENERGY SAVER 50 W)-1200 MM SWEEP |
| 79 | 1 X 40/36 WATT |
| 80 | T - 5 LAMP 1 X 28 WATT |
| 81 | 200 MM |
| 82 | \"SUPPLYING AND FIXING DOWN ROD OF MS PIPE FOR CEILING FAN INCLUDING THREADING,PAINTING, MAKING HOLES ETC. AS REQUIRED C |
| 83 | \"EARTHING WITH COPPER EARTH PLATE 600MM X 600MM X 3MM THICK INCLUDING ACCESSORIES AND PROVIDING MASONARY ENCLOSER IN CEM |
| 84 | \"ADD EXTRA FOR USING SALT AND CHARCOAL / COKE FOR G.I. PLATE OR COPPER PLATE EARTH ELECTRODE AS REQUIRED INCLUDING EXCAV |
| 85 | \"LED LUMINIARE 1\" X 1\", 24W , 4-6.5K\" |
| 86 | LIGHT POINT/FAN POINTS.SHORT POINT |
| 87 | LIGHT POINT/FAN POINTS.MEDIUM POINT |
| 88 | LIGHT POINT/FAN POINTS.LONG POINT |
| 89 | \"POINT WIRING INCLUDING METALLIC SWITCH BOX, SHEET, SWITCHE, SOCKET FOR 3 PIN 6 AMP. SOCKET OUTLET POINT WITH 1.5 SQ. MM |
| 90 | ON SEPARATE BOARDMEDIUM POINT |
| 91 | ON SEPARATE BOARD LONG POINT |
| 92 | ON SEPARATE BOARD EXTRA LONG -I |
| 93 | ON SEPARATE BOARD EXTRA LONG -II |
| 94 | ON SEPARATE BOARD EXTRA LONG -III |
| 95 | CIRCUIT WIRING 2X2.5 SQ.MM. |
