|
| 1 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of Oil Bound Distemper of any light shade complete all as specified and directed. |
| 2 | The same as per item No 1 above but on ceiling surfaces. |
| 3 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 4 | M&L15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6, finished even and smooth (without using extra cement) complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick in cement mortar 1:4 finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 6 | M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed. |
| 7 | M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 8 | M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 9 | M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 10 | M & L for preparation of newly plastered surfaces ofwall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed. |
| 11 | M&L for applying two coats of oil bound distemper on wall or concrete surfaces over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 12 | M&L for applying two coats of oil bound distemper on ceilingon prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 13 | M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed. |
| 14 | Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 15 | M&L preparation of new plastered or unplasteredsurfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 16 | M&L Preparing old painted surfaces of walls, chajjas, pillars etc by washing rubbing down and stopping and applying one coat of cement base paint white or tinted complete all as specified as directed. |
| 17 | M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed. |
| 18 | M&L for two coats of weather coat paint (apex) on old surfaces of wall including preparation of oldplastered surfaces complete all as specified and directed. |
| 19 | Cleaning, removing all scale, dust, dirt and elgy of tank capacity 500 litre with wire/jute brush from inside of RCC/PVC tanks and connected pipe removing to a distance of not less than 250mtrs, washing the tank/pipe with bleaching powder solution and finally applying 2% potassium permangnate solution for disinfection, including marking with black paint on white base on tankas \"Tank cleaned on ____ Dt_____\" complete all as specified and directed. |
| 20 | The same as per item No 19 above butof capacity 1000 litres. |
| 21 | S&F in repair Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminiumrod& high density plastic ball screwed for iron pipe and fixed.(Minimum weight20mm-210gms) complete all as specified and directed. |
| 22 | M&L for writing letters (6cm height)or figures (Block Roman, Italic or Indian) not exceeding 30 cm heights with synthetic enamel paint including preparing of old painted sufrace complete all as specified and as directed. |
| 23 | M&L for complete removal of existing treatment and applying ultra damp proof paint complete all as specified and directed. |
| 24 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level)complete all as specified and directed. |
| 25 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 26 | Demolition of reinforcement cement Concrete of any description and in any position not otherwise specifically provided for columns, beams, lintels etc complete all as specified and directed. |
| 27 | M&L Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all complete all as specified and directed. |
| 28 | The same as per item No. 27above but except bricks. |
| 29 | M & L for plain cementconcrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 30 | M&L plain cement concrete nominal mix 1:3:6 type B-1 using 20mm graded stone aggreagate as insurface channel drain including neccssary form work as requiredcomplete all as specified and directed. |
| 31 | M&L 40 mm thick plain cement concrete 1:2:4, type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 32 | S&F Glass dividing strips, 3 mm thick and 28 mm wide complete all as specified and directed. |
| 33 | M&L Reinforced cement concrete nominal mix 1:2:4 type B-1 using 20mm graded stone aggreagate as inslab supported on wall, beam,in coloumn,in floor landing, balconies canopies deck slab and in shelves complete all as specified directed. |
| 34 | Form work to soffits of slab such as roof slab, floor slab, landing and similar work etc rough finished surface of cocrete complete all as specified and directed. |
| 35 | M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete all as specified and directed. |
| 36 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling, sub base and mass concrete complete all as specified and directed. |
| 37 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 38 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed. |
| 39 | Dismantling of tiles/stone slabs of any description or thickness, laid dry or laid dry and pointed in floors, aprons etc complete all as specified and directed. |
| 40 | M&L Pre-cast cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) as in kerb stone block set in cement mortar 1:6, complete all as specified and directed. |
| 41 | M&L for Chequered cement concrete tiles (in any shade) of size 25cmx25cmx25mm thick, set, jointed and pointed with grey cement and pigment in floors laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 42 | M&L for vitrified heavy duty (dura stone) tiles 300x300x9 to 10 mm thick in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 43 | M&L 15 mm thick rendering on other than fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed. |
| 44 | M&L for two coats of weather coat paint (apex) on new plastered surfaces of wall including preparation plastered surfaces complete all as specified and directed. |
| 45 | M&L preparation of new plastered or unplasteredsurfaces of wall and applying two coats of cement base paint over a coat ofprimer complete all as specified and directed. |
| 46 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 47 | S&F framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed. |
| 48 | Dismantling posts or struts (wood or steel or RCC) any section including taking out embedded portion and making good disturbed ground surfaces complete all as specified and directed. |
| 49 | Dismantling of fencing wire mesh any type complete all as specified and directed. |
| 50 | Excavation in post holes (or similar holes) each n exc 0.5 cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 mtr and making good surface in soft/loose soil complete all as specified and directed. |
| 51 | S&F MS angle Iron as in fencing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc conforming to Fe 410-O or Fe 310-O complete all as specified and directed. |
| 52 | S&F MS work conforming to Fe 310-O as in FI fillets for securing chain link fencing, angle iron horns, posts, etc cut to length bent to shape with necessary cuts, drilling holes etc complete all as specified and directed. |
| 53 | Supply only chain link fencing of MS GI wire mesh, 4mm dia of GI wire mesh up to into mattresses or cages lapped wired incl. staple etc complete all as specified and directed. |
| 54 | Fixing only chain link fencing of any mesh size/any type incl. link wire to any type of standard rails/supports etc & straining bolt etc incl. provision of binding wire complete all as specified and directed. |
| 55 | Supply only mild steel round bar 10mm dia conforming to Fe 290 Gde E-165 as line wire for chain link fencing. Note : Cutting to length, bent to shape required including binding with MS wire is included in item No. 54 here in before complete all as specified and directed. |
| 56 | S&F in repairmild steel, screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 5cm but not exceeding 10cm long and dia of shank 05 to 10mm complete all as specified and directed. |
| 57 | S&F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire stapples or steel pins etc complete all as specified and directed. (each line wire to be measured). |
| 58 | M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 59 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set incementmortar complete all as specified and directed. |
| 60 | M&L 300mm dia Reinforced concrete pipes, class NP2, laid and jointed on concrete bed including PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) packing under and haunching against the side of pipe after they are laid and tested complete with collars all as specified and directed. |