Tender For Construction Of Dining Hall For Community Hallats.Alagapuri In Kamatchipuram Panchayat., Theni-Tamil Nadu

Tender For Construction Of Dining Hall For Community Hallats.Alagapuri In Kamatchipuram Panchayat.; 1 Earth work excavation in all classes of soil lead and lift for foundationincluding of all labour charges etc.complete., 2 Cement concrete 1:4:8using 40 mm gauge hand broken granite stone jelly for foundation including watering where ever necessary and laid in layers not more than 15 cm thick compacting etc complete 3 supplyin,erecting and centring including cost and conveyance of all materials to site and all labor charges etc. -earth beam,column 4 supplyin,erecting and centring including cost and conveyance of all materials to site and all labor charges etc. -lintel beam, sunshade 5 Supplyingand fabrication of of steelincluding cost and conveyance of all materials to site and all labour charges etc complete. 6 RCC-1:1.5:3 using 20 mm metal (ISS HBG metal) including cost and conveyance of all materials to site and all labour charges etc 7 Brick work in cm 1: 5mix using country brick including cost and conveyance of all materials to site and all labor charges etc. 8 Re-filling with excavated earth as per std.specification 9 Floor finish with granolithic pattern floor finish with plain cement concrete 1 : 2 : 4 (one cement two sand and four hard broken stone) using 10 to 12 mm size hard broken granite stone jelly 25mm thick and the top rubbed smooth, etc complete 10 Plastering in CM 1:3,mix using10 mm thick ,including cost and conveyance of all materials to site and all other labour charges including curing etc., as per standard specification. 11 Plastering with cement mortar 1:5 using 12mm thick over the cement concrete for floor finish including curing etc complete 12 Painting in two coats over inner wall surface with approved quality of Oil bound distember with colour over one coat of pirming coat including cost and conveyance of all materials to site etc 13 Painting using Plastic emulsion paintincluding cost and conveyance of all materials to site and all labour charges etc 14 painting in two coats overone coat of pirming coaton New iron works including cost and conveyance of all materials to site etc 15 Fabrication and supply of MS Door of any required size with Double leaves outer frame made of 35 x 35 x 5 mm equal MS ‘L’ angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 2 nos. horizontal and 3 nos. diagonal u 16 Fabrication and supply of MS Window of any required size with three leaves outer frame made of 35 x 35 x 5 mm equal MS ‘L’ angle mullion section made of 35 x 35 x 5 mm equal ‘T’ section shtter frame made of 25 x 25 x 5 mm equal MS ‘L’ angle for horizontal 17 Fixing in position Mild Steel Double Leaf Door including Joineries and all other labour charges etc. complete as per standard specifications. 18 Fixing in position Mild Steel Window & Ventilator including Joineries and all other labour charges etc. complete as per standard specifications. 19 for roofshedsupply and fixing of M.S. Anglesection including nessecery cutting , welding holes drilling, and fixing with rafts, post etc. complete 20 Roofing with colour coated GI sheets with all necessary fittings including cost , conveyance and fixing in position 21 supplying and fixing of cudappah slab 22 ProvidingThe water supply & Electrical arrangement Earth work excavation in all classes of soil for pipe line trench 23 32mm pvc pipe for mainpipe connection 24 20mm pvc pipe forinternal pipe connection 25 32mm pvc elbow 26 20mmpvc tee 27 20mm pvc elbow 28 Laying and jointing the20mmpvc pipe line 29 Re-filling with excavated earth as per standard spesification 30 supply and fixing the 200 Litre HDPE tank 31 supply and fixing thehand wash basin set with all Acceseries 32 sub-estimateElecrical works Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable colour for open-Light point-SD 18 33 Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm T.W. switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non - inte -Plug point-SD36 34 Supply and runoff 2*1.5 mm2 PVCinsulated SC unsheathed Cu.conductor of 1100 V garde in 25 mm dia GI pipe (class B) suitably bent at both end with necessary angle iron upright and end support for mains 35 Supply and runoff 2 of 6 mm2 (84/0.3) pvc insulated SC unsheathed Cu.conductor of 1100 v on 7/20 Gi bearer wire for service connection main-SD64 36 Supply and fixing of 1200 mm ( 48 ) AC ceiling fan with complete with stepped electornics 300 W regulator with 300 mm down rod on the existing clamp etc complete. S.D 107 37 Supply and fixing of single box type 4 40w flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with lu tube with PVC unsheathed copper leads from terminals to the fittings etc S.D No. 88 38 Supply and fixing of 16 AMPS DPIC switch of 500 v with fuse and neutral ( side handle) on suitable TW board with earth connection onlyS.D No 150 39 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}

Refer document

INR 10000.0 /-

INR 10000.0 /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB