Tender For Construction Of Control Room At Sirsa Pump Canal - Construction of control room with all cost of material labour T&P etc. for proper completion of work at Sirsa Pum Canal.(GST will be paid extra as per govt. norms) 2 Earth work in excavation in treanches for foundations and pipes, cable etc. in ordinary soil (Loan clay or sand) including lift upto 1.5m lead upto 50m and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer-in-charge within a lead of 50m. 3 Earth filling in plinth under floors including watering, ramming, cosolidating and watering, ramming, cosolidating and dressing complete including lead upto 50m and lift upto 1.5m. 4 Cement concrete with 40mm gauge approved stone ballast,coarse sand & cement in proportion stone ballast,coarse sand & cement in proportion of 4:2:1 including supply of all materials, labour, Tools & plant etc. required forproper completion of the work. 5 DAMP PROOF COARSE -2.5cm thick Damp proof coarse withcement concrete consisting one part of cement, 1.5part approved coarse sandand 3 part approved 10mm graded stone agreegate and including water proofing materials as ordered by E/I. in the proportion as specified by the manufacturer. 6 ANTI TERMITE TREETMENT PRE CONSTRUCTIONProviding and injecting chemical emulsion for pre constructional antitermite treetment and creating a chemical barrier under and alround the column pits, wall treanches, basement. Excavation top surface of plinth filling junction of wall and floor along the external perimeter of binding expansion joints, surroundingof pipes and conduit etc. complete ( Plinth area of the building at ground floor only shall be measured as perI.S. 6313(part II 1981). Aldrine emulsifiable concentrate any other approved materials such asHeptrachlor or chlordance will be used. The rate of application of chemicalemulsion shall be asfollows: (1) Treetment for masonary & foundation 5litres per sqm. (2) Back fill in immediate contact with foundation 7.5litres per sqm. (3) Treetment for top surface of plinth fillings 5litres per sqm. (4) Treetment for walls and the floor 7.5litres per sqm.(5) Treetment of soil along external perimeterof building 7.5litres per sqm.(6) Treetment of soil under apron alongexternal perimeter 7.5litres per sqm. 7 BRICK WORK-Class-150 brick work in 1:4 cement and corse sandmodulous mortar in foundation and plinth including supply of all materials labour and T&P etc. required for proper completion of the work ( Upto Plinth Level) 8 B/W in super structure 1:4 cement corse Sand above plinth level upto floor twolevel( upto two storeys) includingnecessary cutting moulding of brick work in thickness of wall more than 12cm. 9 R.C.C. work with cement approved coarse sand and 2cm(3/4) gauge approved stone ballast in the proportion1:1.5:3 in lintels1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWG binding wire and including necessary centering and shutteringetc. and also including supply of all materials labour and T&P etc. required for proper completion of the works.Strength of the concrete shall not be less than M-20.. (A) Lintel & Plinth Beam 10 (B) Sunshade & Slab 11 (C) Beam 12 Mild steel or iron in plain work Such as reinforced concrete orreinfoced brick work(When not reinfoced brick work(When notincluded in an overall rates) wrought to required shape as necessary including bending for proper completion of work and include completion of work and includingcompletion of work and including completion of work and includingsupply of steel its wastage bend hooks and authorised overlapping shall be measured upto floor two level 13 M.S. STEEL & IRON WORK-M.S. or Iron work in angle Iron door and window frame including cutting,welding & wastage including supplyof all materials, labour T&P etc. requiredfor proper completion of the work. 14 Same as in item 502 above but in Steel Z- section window excluding glass panes. 15 S/F M.S. sheet1mm thick in windows and ventilatersincluding supply of all materials , labour, T&P required for proper completion of the work. 16 Providing and fixing1mm thick ms sheet garage door with frame of 40x40x6mm (1.5x1.5x.25) angle iron 3.15 mm (1/8) thick M.S. gusset plate at junction and corner including supply and fixing of necessary fittings, lock rall of 15 length of oxidise iron including pintels hooks at the top and applying a priming coat of red led paint on all sides complete. 17 PLASTER AND POINTING -12mm cement plaster 1:3 cement and Corse sand mortar. 18 PAINTING AND DISTEMPERING -Finishing wall with white coloured two coats of approved make of Birla/j.K. wall puttyincluding cost of all materials, labour ,T&P required for proper complition of work 19 Distepering (First coat) with oil bounddistemper of approved brand and manufactureand of required shade on undecorated wallsurface to give an even shade over and including a priming coat with cement primerof approved brand and manufacture shch as Berger, J & N Shalimar, Asian Paints after thoroughly brushing the surface free from mortar dropping and other for eignmatter and also including prepairing the surface even with Plaster of Paris or approved synthetic material and sand papered smooth including cost of all materials. 20 As in item No. (649) above but for everycoat after first coat or subsequent coat.(One Coat) 21 Painting two coat of synthethic enamel paint on new surface (excluding cost of primer) superior quality such ashighgloss, apcolite, superic, dulux, including cost of all materials, labour ,T&P required for proper complition of work 22 FLOORING -2.5cm(1.0) thick 1:2:4 plain cementconcrete floor with cement, approved coarse sand and 2cm(1) graded approved stone, laid in panels finished with 3mm (1/8) floating coat of neat cement or cement and marble dustin ratio of 5:1 as specified over and including 8cm(3) thick base concrete cosisting of cement fine sand of 1.25 fineness modulus and brick ballast 4cm(1.5) gauge in the proportion of1:4:8 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish, including supply of all materials, labour, T&P etc. required for proper completionof the work. 23 Providing & Fixing glass Strips of 5.5mm in joints of floors and skirtings at the time of laying floors flush with floor level including all materials, labour, Tools & Plants etc.complete. (b) of 3.7 cm ( 1.5) depth 24 2cm. Thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two part of aproved coarse sand laid in panels finished with 3mm floating coat of neat cement or cement mixed with marble dustin ratio of 5:1 including supply of all materials,labour T &P required for proper completion of work. 25 Supply &fixing of 10cm internal dia. Of A.C. down pipes complete with rose head bends shoes and grating & including supply of necessary M.S. clamps 25mm x 3mm fixed to walls with and including 15cm long 6mm dia. nails if necessary & supply of all materials, labour, T&P required for the proper completion of the work and also including repair of plaster & walls if damaged to match the exiting work. 26 Making Khurras 45cm x 45cm with C.C. 1:2:4 average 5cm thick includinga coat of neat cement also includingall materials, labours, and T&P etc. required for proper completion of the work. 27 Wiringfor light point /fan point/call bell point with 1.5sq. mm FRLS P.V.C. insulated copper conductor single core cable in surface /recessed steel conduit with piano type switch ,phenolic laminated sheet , suitable size MS box and earthingthe point with 1.5 sqm.mm FRLS P.V.C. insulated copper conductor single core cable etc. as required.(as per cpwd dsr 1.1,2022)group C 28 Supplying and fixing 25 A double pole (single phase and neutrul ) 240V, residual current cuircit brekar (RCCB), having a sencitivity current 30mA in the exixting MCB DB complite withconnection, testing and commissioning etc.as required. 29 Wiring for curcit /submain wiring alongwith earth wire with the size (2x1.5 sq.mm +1 x1.5 sq.mm earth wire) of FRLS P.V.C. insulated copper conductor single core cable in surface /recessed steel conduit as required 30 Wiring for light /power plug with 4x4 sq.mm FRLS P.V.C. insulated copper conductor single core cable in surface /recessed steel conduit along with 2 Nos. 4 sq.mm FRLS P.V.C. insulated copper conductor single core cable for loop earthing as required 31 cost of celling fan usha /bajaj/cromton/havells as per market rate 32 installation testing and commissining of celling fan ,icluding the down rod of standard length (up to 30cm) with 1.5sq. mm FRLS P.V.C. insulated copper conductor single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc.as required 33 Supply & Fixing of Factory wired, HPF box type fluorecent tube light fitting suitable for 1 x 40 watt fluorescent tube complete including tube etc. on surface complete in all respect
