Tender For Providing And Fixing Required Items For Shifting Of Cctv Control Room At Amber Fort, Jaipur. - S&F following sizes (dia.) of ISI marked virgin material MMS (IS:9537 PIII) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product /work refer Annexure A attached with this BSR 25 mm 32 mm Supply & Installation of IP-20 & IK-08, UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door, Vertical Mounting Rail 1.6 MM with UMarking with All round 7 protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19 angles with wall mounting provision on wall. Accessories like: 1 No of 19 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware, 1 No of 19 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work attached with this BSR. refer Annexure A 19 U Rack with Width 600 mm & Depth 400 mm + 100 mm Fiber Fusion Splicing with OTDR Testing of Fiber Single/ Multi mode (per splice) of glass Fiber Optic Cable including cleaning the cable and making splice as per standard practice complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR. Supply, Drawing and Testing, of stranded Single mode (9/125 µm) glass optic fiber cable, as per latest ammendments of TIΑ/ΕΙΑ 568/ISO/IEC, construction of LSZH outer sheath cable, cable should be used for LAN and WAN back bones,. With its LSZH sheathing these cables should be ideal for indoor/outdoor installations in existing MS/PVC/HDPE Conduits/ slotted channels with ferruling at both ends for identification complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR. 12 Fiber Supply, Installation, & Testing of Indoor duplex Multimode patch cord ( 50/125 * mu*m made of glass fiber optic with LSZH jacket, F8 2 * 4.1 mm, Multimode G652.D Mounted on both sides with ST/E-2000/SC/LC/MT-RJ/PC type Duplex connectors in acc. with IEC 61754-20. Zirconia (ceramic) ferrule with a PC polished endface geometry, connectors should be tuned in accordance with IEC 61755-3-1 and qualified in acc. with IEC 61753-1 for category U (uncontrolled environment, duplex clip and white plastic dust cover, should comply to delta IL < 0.2 dB after 500 mating cycles, there should be an optional Visual coding, mechanical coding and lock protection on the patch cords which can be added on later stage. patch cordss performance should be acc. to IEC 61753-1 (Table A.12) as per latest ammendments of TIA/EIA 569B.3, as per requirements. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR. 1 Mtr Supply, installation, Testing and Commissioning of 1000 base-LX/LH single mode/Multi mode fibre to 1000 base-T copper giga bit, Media Convertor complete as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR. SITC of 8 port Giga PoE Switch with dual uplink: unmanaged PoE switch; (8 * 10 / 100) / 1000 mbps Base-T POE; 2^ * (10/100) / 1000 Base-T (Uplink) or 2 ^ * 1000 Base-X (uplink); PoE Power Consumption per Port: ≤30W; power budget: minimum 96 W; POE Protocols: IEEE802.3af, IEEE802.3at Switching Capacity: 20 Gbps or better; MAC Table Size 2K or better, Working Temperature: -5^ C sim 55 deg * C ; Power supply: DC48~57V Certificate of compliance: CE/FCC. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022. Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568, The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR. Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130: 2013 of 1.1 kV grade. Wire should be made from 99.90% purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss, oxygen free for less chances of oxidization, insulation PVC type A/C/D, flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules, testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR 3 x 2.5 sq.mm Hire charges for 50/55 HD LED/Plazma TV complete with mounting arrangement, connections, testing etc.with skilled operator to operate system as and when etc as required. (If work contineue for more then one day, rates for next subsequent days will be 50% of the original rates.) Supply, Installation, Testing & Commissioning of 2 KVA 1 Phase Input With GBT Based Rectifier True Online Double Conversion Robust design Wide input Voltage range:160- 300 VAC @100% load (Linearly derating to 50% load @ 100 VAC input). Generator Compatible with Wide Input voltage Window Input voltage window Double Conversion Effieiency >91% & ECO Mode efficiency up to 98% 100% load @ 0 40C operating temp. Active input Power Factor Correction 0.99 O/P power Factor 0.9 Inbuilt OVCD (Over Voltage Cut-off Device) Fully Conform Coated PCBA adaptable to harsh environment Offer terminal blocker on 2K/3K rating to Connect to big capacity equipment Digital Charger Technology provide 02-10 A Charging current Easy understanding LCD for convenint installation setup with minimum 60 minute battery back up (26AH x 6 Nos of SMF batteries branded and recommended by UPS OEM, Battery stand and interlink FR PVC copper cable of appropriate size and lugs), with required cabling for incoming & outgoing connection. UPS should be NABL certified with SITC of Plena Six-zone system pre-amplifier, with single or dual channel operation Two input channels for call stations Voltage 230/115VAC, +-15%, 50/60 Hz, Max power consumption 25 VA, Frequency response 50 Hz to 20 kHz (+1/-3 dB), Dynamic range 100 dB Mic/line, Make:- JBL/Bosch/FBT Supply & Laying of 2 Core X 2.5 Sqmm Cable for Speakers Make :- FINOLEX, DELTON, KRAMER. Removing & refixing the existing floor stone for laying the cable/wire/conuit and making good the same i/c replacement of broken stone complete etc. as required. P&F of 12V, 12 AH SMF Battery And Buy Back of 12V, 12 AH SMF Old Battery Make:- Exide/Luminous/Amaron P&F of 12V, 26 AH SMF Battery And Buy Back 12V, 26 AH SMF Old Battery Make:- Exide/Luminous/Amaron P&F of 12V, 42 AH SMF Battery And Buy Back 12V, 42 AH SMF Old Battery Make:- Exide/Luminous/Amaron Supply, Testing and Commissioning of BIS certified company made 55 LED Monitor professional series, Resolution 3840X2160, 2X HDMI port 1X USB Port, Inbuilt Media Player should be as per OEM for web browser and file sharing compatibilty through IP, RJ45, Wifi, Bluetooth, Contract Ratio -4000:1, Resonse Time -8ms, Brightness 300 Nits or higher Built in speaker Viewing angle 178X178 degree, all mount kit External media player compatible for above if required safety and EMC Certifications- CE, FCC, UL with required HDMI cable Complete in all respect all as per approved by Engineer in Charge. For additional Technical parameters of products/Work.
