Tender For Spl Repair To Bldg No T-135 In The Area Of Age B/R-I Under Ge Gwalior; 1 Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) incl the disposal upto 50M complete all as specified and directed. 2 Demolition of Reinforced Cement Concrete (Existing RCC water tank) of any description and in any position not otherwise specifically provided for complete all as specified and directed 3 M&L for PCC (1:5:10) type E2(using 40mm graded stone aggregate) as in sub base of floor or sunken floor etc complete all as specified and directed. 4 M&L for 25 mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in leveling course complete all as specified and directed. 5 M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 as in floors complete all as specified and directed. 6 Same as Item No 5 but tiles in vertical surfaces of wallset and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. 7 M&L for non skid ceramic colouredtiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed. 8 M&L forglazed ceramic coloured tiles of size 350mm x 250mm x 7mm/ 450 x 300 x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed inwhite or colour cement to match, fix over and including 10 mm thick rendering in cement plaster 1:4 on fair facesbrick work or concrete surface complete all as specified and directed. 9 Dismantiling of stone slabs and tiles (Kota stone etc)of any discription or any thickness in floors, aprons, skirting, dado etclaid bedded and pointed in any mortar complete all as specified and directed. 10 M&L for Granite (of any type) tiles 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, laid over and including 15mm thick screed in CM 1:4 complete all as specified and directed. 11 Demolition of brickwork, plain cement concreteor stone/ boulder masonry, built in cement or lime mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified anddirected. 12 M&L for Brickworkwith subclass B bricks old size brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. 13 Brick work with sub class `B bricks straight or curved on plan exc 6m mean radius, built in CM 1:4, in half brick thick walls complete all as specified and directed. 14 M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs for man holes, drain and set in CM 1:6 including necessary fromwork complete all as specified and directed. Note: Reinforcement shall be measured and paid separately. 15 M&Lfor mild steel TMT bars, 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. 16 Taking down cement plaster on brick or stone wallsetc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified anddirected. 17 M&L for 15mm thick rendering on brick or stone/concrete any surfaces in cement mortar 1:4mixed with liquid WPC @ 0.4% by weight of cement, surface finished even and smooth withoutusing extra cement complete all as specified and directed.Note : WPC shall be measured & paid seperately. 18 Supply only integral liquid water proofing compound (ISI marked) complete all as specified anddirected. 19 M&L for 10 mm thick rendering in cement mortaron fair faces of brick work or concrete surfaces in cement mortar (1:6) and surface finishedeven and smooth, complete all as specified and directed. 20 M&L for5 mm thick rendering in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. 21 M&L for preparation of the newly plastered surfacesof ceiling & applying3 coats of white wash on ceiling surfaces complete all as specified and directed. 22 M&L for preparation of old decoratedsurface of ceiling and applying one coat of white wash complete all as specified and directed. 23 M&L for Preparation of new plaster surfaces of walls, applying 1-2 mm wall care putty on walls and two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification over a coat of primer complete all as specified and directed. 24 M&L for complete removal of existing treatment and two coats of Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification on walls over a coat of primer complete all as specified and directed. 25 M&L for complete removal of existing treatment and two coats of Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification on ceiling over a coat of primer complete all as specified and directed. 26 M&L for Preparation of new plaster surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. 27 M&L for complete removal of exiting treatment from external walls (any numbers of layers) by scrapping with steel scrappers or any other means, preparation ofold surfaces complete applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. 28 Taking down ventilators of any type size not exc 1 Sqm each complete all as specified and directed. 29 S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed. 30 Supply only 3mm thick figured glass pin head type in square size n.exc 0.5 Sqm in each pane new ventilator/ window shutter complete all as specified and directed. 31 Taking down chowkhat frame with shutter (without taking out shutter from the frame) size n.exc 1.50 Sqm each complete all as specified and directed. 32 Taking down chowkhat frame with shutter (without taking out shutter from the frame) size exc 1.50 Sqm but n exc 4 sqm each complete all as specified and directed. 33 S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling & fixing in opening as per specification complete all as specified and directed. 34 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. 35 S&F for pressed steel frame of size 105 x 60 mm for door with one or more rebates makaing necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. 36 S&F 30 mm thick Flush shutters, soild coreconstruction with block board core and plywood face panels both face covered with decorative face veneer with lipping /frame to match and complete all as specified and directed. 37 M&L for repair Aluminum door of any type &any size, taking down and re-fixing including all small accessories (like handle, gaskit, hinges, tower bolt, door stopper etc) complete all as specified and directed.Note : Glass & Particle board etc shall be paid separately. 38 M&L for repair Aluminum window of any type &any size, taking down & refixing including all small accessories (like handle, rubber/gaskit, hinges, tower bolt, door stopper etc)complete all as specified and directedNote : Glass & wire mesh etc shall be paid separately. 39 S&F in renewal of door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked),suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. 40 S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. 41 S&F Anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators, partitions with one or more rebates including jointing cleat for fixing etc complete all as specified and directed. 42 S&F anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips, rubber neoprene packing, handles two numbers in each door, 100mm long 03 Nos brass hinges, 200mm long aluminium tower bolts, 01 Nos door stopper anodised aluminium snap beading screws etc including M&L for fixing floor machene and godrej lock in each door complete all as specified and directed. 43 S&F anodised powder coated aluminium windows, ventillators shutters, slidding type, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips, rubber neoprene packing,anodised aluminium snap beading screws, locking latches etc complete all as specified and directed. 44 S&F 5.5 mm thick sheet or tinted glassof selected qualityin square size not exceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beadingcomplete all as specified and directed. 45 S&F 5.5 mm thick sheet or tinted glassof selected qualityin square size exceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beadingcomplete all as specified and directed. 46 S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 47 S&F in renewal of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. 48 S&F in renewal of Solid PVC Wall lining consisting of 5mm thick prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed. 49 Dismantling boarding, any description, fixed in any position with nails (including Cupboard shutter/Shelve upto 25mm thick) complete all as specified and directed. 50 S&F for 18mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified and directed. 51 S&F for 12mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified and directed. 52 S&F forcontinuous (piano) hinges,mild steel, bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed. 53 S&F formild steel Easy-slide auto Hydraulic hinges (CH-S-8), package contains 2 units of hinges with 4 Nos screw for kitchen cabinet, Cup board, wardrobe etc complete all as specified and directed. 54 S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. 55 S&F Brass 2 Levers Cupboard locks grade 1, Size 50mm complete all as specified and directed. 56 S&F for 100 mm Brass handles, cast type, polished bright and fixed complete all as specified and directed. 57 S&F for Butthinges, 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed. 58 S&F for 200 mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. 59 S&F forAluminium handles, cast type anodised of Size 150 mm complete all as specified and directed. 60 S&F for 300 mm size aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy complete all as specified and directed. 61 S&F in renewal of 140mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. 62 M&L forpreparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 63 M&L forfor applying one coat of synthetic enamel paint on old steel & iron surfaces (previously decorated) for grills, guard bars of any description not otherwise described over 10cm in width or girth including preparation of old surfaces complete all as specified and directed. 64 Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position, including all fittings, heads, shoes, bends, swan necks, etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. 65 S&F in renewal of 75 mm diaPVC (SWR) pipes single socketed in any length with rubber ring jointslaid in floor or fixed on wall with necessary clampcomplete all as specified and directed. 66 S&F in renewal of 110 mm diaPVC (SWR) pipes single socketed in any length with rubber ring jointslaid in floor or fixed on wall with necessary clamp complete all as specified and directed. 67 S&F for PVC (SWR) bends any radius, 75 mm bore, provided with access door complete all as specified and directed 68 S&F for PVC (SWR) bends any radius, 110 mm bore, provided with access door complete all as specified and directed. 69 S&F for 75 mm bore, PVC (SWR) junction single (single T) equal or unequal provided with access door complete all as specified and directed. 70 S&F for 110mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed. 71 M&L for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed. 72 S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. 73 S&F in renewal of PVC (SWR) P or S trap 110mm, setting and jointing with solvent complete all as specified and directed. 74 S&F in renewal of PVC (SWR) floor trap/Nahani trap 75mm size plain with grating including setting and jointing with solvent complete all as specified and directed. 75 S&F rotational moulded polyethylene water storage tank of capacity 500ltr (cylindrical vertical with closedtop)double layer construction, ISI marked, hoisted and fixed in position including dismantling of old tank and removing from site complete all as specified and directed. 76 S&F rotational moulded polyethylene water storage tank of capacity 1000 ltr (cylindrical vertical with closedtop )double layer construction, ISI marked, hoisted and fixed in position including dismantling of old tank and removing from site complete all as specified and directed. 77 S&F in renewal of Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe of 20mm bore of brass ferrule complete all as specified and directed. 78 Taking up or down 15 mm dia steel watertubing and connections including cleaning for refixingif required or removal from site complete all as specified and directed. 79 Taking up or down 20 mm dia steel watertubing and connections including cleaning for refixingif required or removal from site complete all as specified and directed. 80 S&F for15mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etccomplete all as specified and directed. 81 S&F for 20 mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified and directed. 82 S&F in renewal of Stainless Steel Peg Set of 6 hooks ISI marked medium weight complete all as specified and directed. 83 S&F for frameless with LED light of size 600x450mm beveled edges mirror of selected quality mountedfixed to wall with rawal plug and screws complete all as specified and directed. 84 S&F in renewal of tublar towel rail aluminium anodised 20mm dia D type 60 cm long between flange brass chromium plated complete all as specified and directed. 85 S&F in renewal of PVC connection of 450 mm length and 15mm dia complete all as specified and directed. 86 S&F in renewal of bib taps, fancy type 15 mm size caste copper alloy long body, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe and fixedcomplete all as specified and directed. 87 S&F in renewal of Brass CP mixer for basin mixing hot and cold water screwed down for iron pipe complete all as specified and directed. 88 S&F for Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible and ABS wall hook including making connection and fixing in position complete all as specfied and directed. 89 S&F in renewal of flushing jet spray for wall hung EWC including 1 m long flexible pipe and brass chromium plated nuts, complete all as specified and directed. 90 S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed. 91 S&F in renewal of angular stop cock fancy type 15 mm caste copper alloy, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe and fixedcomplete all as specified and directed. 92 S&F in renewal of wash hand basin oval type, vitreous china, white (counter sunk type) of size 420 x 420 mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends complete all as specified and directed. 93 S&F in renewal of 32mm bore waste fitting for wash basins and sinks with inlet and outlet, screwed for pipe or connections, and with one cleaning cap,complete all as specified and directed. 94 S&F for Wall mounted EWC with and including flushing cistern with concealed as per cat part No 20028 complete all as specified and directed. 95 M&L in renewal of vitreous china squatting pan, orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed. 96 S&Ffor PVC low level flushing concealed cistern (10 lts capacity) with ball valve float and handle syphonic action type including brackets and 32 mm dia flush pipe of polythelene of low or high density or PVCcomplete all as specified and directed. 97 S&F for renewal of Soap dish of CP fixed with PVC rawal plugs and screw, complete all as specified and directed. 98 S&F for renewal of Chromium plated grating of 100 mm dia complete all as specified and directed. 99 S&F for renewal ofvitreous china urinals, Half stall type, whitewith grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with 60 mm long brass screws, pointing around urinal back in cement and including fixing CP urinal spreader complete all as specified and directed. 100 M&L for removal of old APP based membrane of any description, hacking of plaster underneath and cleaning the roof surface complete all as specified and directed. 101 M&L for 10mm thick Screed bed or bedding layer of mortar on top of roof surfaces of any description in cement mortar 1:4mixed with liquid WPC @ 0.4% by weight of cement, surface finished even and smooth complete all as specified and directed.Note : WPC shall be measured & paid seperately. 102 M&L for bitumenous based primer conforming to IS-3384-1965 @ 0.40 Kg /Sqm including preparation of roof surface complete all as specified and directed. 103 M&L for APP based polymeric membrane minimumweighing 3.5kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application method complete all as specified and directed. 104 M&L for after laying the membrane apply bituminouse aluminium paint @ 200 gm/Sqm (minimum) in two coats complete all as specified and directed. 105 M&L for 75 mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate)finished even and smooth without using extra cement as in plinth protection including forming of joints 10mm wide and 75mm deep and joint filled with bitumin and sand mixture in 1:1 ratio complete all as specified and directed. 106 M&L for100 mm thick cement concrete (1:4:8) type D-2(using40 mm graded stone aggregate), as in sub base for floor, finished even and rough complete all as specified and directed. 107 M&L for60 mm thickness rubber moulded machine pressed precast concrete interlocking paver block M-35 any shape and size, confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sandcushioning complete all as specified and directed.Note :- Sand filling will be measured and paid seperately in respective item of BOQ. 108 S&F Toilet paper holder of brass, chromium plated of stainless steel complete all as specified and directed. 109 Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed. 110 M&L for rolled mild steel in joist, channel, angle, tee sections fixed independently without connecting plate etc of Fe-410W (Gde-250) quality A completeall as specified and directed. 111 Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed. 112 S&F 0.50 mm thick pre -painted galvatume aluminium zinc coating GI based corrugated steel sheet of any colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as specified colour as approved by Engr -in -Charge. 113 S&F 0.50 mm thick pre -painted galvalume aluminium zinc coating GI basedplain steel sheet of any colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as in ridgespecified, colour as approved by Engr-in-Charge complete all as specified and directed. 114 M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, inculuding fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. 115 M&L for Dismantling of AC ceiling board any descrition complete all as specified and directed. 116 S&F for anodised aluminium snap grid frame work for false ceiling consists of powder coated aluminium angle of size 22x22x1.3 mm and Tee of size 35x25x1.3 mm and grid of size 600x600 mm complete all as specified and directed. 117 M&L for Nonasbestos fibre cement building boards 6 mm thickfixed or laid/ inserted to Aluminium anodised frame and hangesframeworkfixed withHangers 3-4 mm dia. G.I. (upto reqd length) adjusting level fixed to roof slabs by means of ceilling cleatscomplete all as specifed and directed. 118 S&F in renewal of Curtain rail stainless steel decorative type 20-25 mm dia including fixing bracket and end knobs complete all as specified and directed. 119 Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. 120 Taking down ceiling/exhaust fan of any sweep, removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including renewal of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and directed. 121 Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. 122 Taking down unserviceable Sheet metal box & MCB DB SPN with MCBs of any make/capacity, complete all as specified and directed. 123 Taking down unserviceable TPN DBwith MCBs of any make/capacity, complete all as specified and directed. 124 M&L for concealed point wiring with PVC insulated and unsheathedelectric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade (ISI marked with valid CML No)not less than 20 mm diawith all fitting and fixing accessories and1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxesfactory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete all as specified and directed. 125 One light point controlled by one switch. 126 One Ceiling fan point controlled by one switch. 127 One Exhaust fan point controlled by one switch. 128 One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. 129 One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. 130 One light point controlled by 2 xtwoway switches 131 Three light point controlled by one switch. 132 Description all as per item No 124 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed. 133 S&F Modular switch 1 way 6 A,1 module complete all as specified and directed. 134 S&F modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. 135 S&F Modular switch 1 way 16 A,1 module complete all as specified and directed. 136 S&F modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. 137 S&F modular switch piano, flush button (2 way)two way 5 Amp complete all as specified and directed. 138 S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. 139 S&F modular Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed. 140 S&F modular Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed. 141 S&F LED Lamp 12 Watt complete with 5 star rating complete all as specified and directed. 142 Supply and fixing LED luminaire of size 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. 143 S&F Decorative ultra slim LED Tubelight fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 4000k to 6500k as per required fitting including reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. 144 S&F security light fittings better optics for uniform distribution IP 66 protection LED of 30 watt with photometric sensor automatic on/off at night/morning, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm size FI, with 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqdlength of 1.5 Sqmm PVC multistranded BIS marked, 03/02 core copper conductor for connection from ceiling rose to light fittings including testing on completion complete all as specified and directed. 145 S&F 9 Watt Concealed Ceiling LED Light in Round shape Lighting, 4000k to 6500k as per required fitting including reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. 146 S&F Solar LED Pathway Lamp BIS Approved IP65 Water proof Bollard Landscape Lamp with 800mAh Ni-MH Battery & Panel Decoration LED Spotlight for Walkway 2.5 ft Height including all accesseries Lighting Color -Warm/White complete all as specified and directed. 147 M&L for sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. 148 M&L for sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. 149 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. 150 Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. 151 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mcomplete all as specified and directed. 152 S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 160 Amp, 4 pole & including MCCB 160 amps 4 pole 25 KA complete with suitable size of busbar complete, fixed flush in wall including chases wall for fixing DB and making goodthe distributed wall surfaces to match with existing specification including taking down complete all as specified and directed. 153 S&F MCB DB, sheet metal enclosures double door SPN 12 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed. 154 S&F, MCB SPN63 Amps, 240 volts C series 16 KA including connection with suitable size copper lugs complete all as specified and directed. 155 S&F, MCB SP 240 volts, 6 to 32 Amps, C series 10 KA including connection with suitable size copper lugs complete all as specified and directed. 156 S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed. 157 Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable(Heavy duty) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core complete all as specified and directed. 158 Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. 159 Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed. 160 Removing of surplus soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. 161 Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed. 162 Supplying and laying un reinforced precast concrete cable coverClass LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed. 163 S&F tube Light grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. 164 Supply and fix cable jointing kit for 1.1 KVgrade cable for endjoint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type complete all as specified and directed. 165 Taking out old u/s pipe line alongwith fittings from existing connections of size 25 mm dia complete all as specified and directed. 166 M&L for GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches complete all as specified and directed. 167 M&L for GI pipe Med grade of 20 mm dia alongwith all fittings and fixtures complete laid in trenches complete all as specified and directed. 168 S&F in renewal of 25 mm dia Brass Gate Valve cofiorming to IS 14846/2000, ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts fixed at any location complete all as specified and directed. 169 S&F in renewal of 20 mm dia Brass Gate Valve cofiorming to IS 14846/2000, ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts fixed at any location complete all as specified and directed. 170 M&L for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm size mild steel angle iron frame for cover, 10mm thick plaster in CM 1:4 on internal surface of concrete, 40mm thick precast cover RCC (1:2:4)type B-1 (using 20mm graded BT stone aggregate) reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of MS Flat of size 50 x 5 mm in D shape 500 mm legth grouted in wall complete 1 x 6 sqmm multistrand PVC insulated copper conductor (Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed. 171 S&F for modular plate and provising of new modular plate of different size with flush metel boxincluding fixing, the existing modular switchs, modular socket, modulare regulator and refixing them in new board 172 White cover plate with frame but 2 module 173 White cover plate with frame but 3 module 174 White cover plate with frame but 4 module 175 White cover plate with frame but 6 module 176 White cover plate with frame but 8 module 177 White cover plate with frame but 12 module
