|
| 1 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed. |
| 2 | Materials and Labour for Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Casing and Caping with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one waycomplete all as specified and as directed. |
| 3 | Allas per item No 2 here-in-before butOne bell/buzzer point controlled by one push button on the same board with other switches or independent with cablescomplete all as specified and as directed. |
| 4 | Allas per item No 2 here-in-before butfor One 3 pin 5 Amp switch socket outlet on independent board complete all as specified and as directed. |
| 5 | Allas per item serial No 2 here-in-before but for One 3 pin 5 Ampsocket outlet on same board with other switches.complete all as specified and as directed. |
| 6 | Allas per item No 2 here-in-before but wiringwith 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.complete all as specified and as directed. |
| 7 | Materials and Labour forPoint wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conduit conclead with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and as directed. |
| 8 | Allas per item No 7 here-in-before butOne bell/buzzer point controlled by one push button on the same board with other switches or independent with cablescomplete all as specified and as directed. |
| 9 | Allas per item No 7 here-in-before butfor One 3 pin 5 Amp switch socket outlet on independent board complete all as specified and as directed. |
| 10 | Allas per item serial No 7 here-in-before but for One 3 pin 5 Ampsocket outlet on same board with other switches.complete all as specified and as directed. |
| 11 | Allas per item No 7 here-in-before but wiringwith 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.complete all as specified and as directed. |
| 12 | Allas per item No 7 here-in-before but wiringwith 4 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 4 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.complete all as specified and as directed. |
| 13 | Supply and fixing switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed. |
| 14 | Supply and fixing Bell push switch, flush type, 5 Amps 230 volt complete all as specified and as directed. |
| 15 | Supply and fixing socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and as directed. |
| 16 | Supply and fixing switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and as directed. |
| 17 | Supply and fixing switch socket combination multipurpose, 2 in 1, 6 pin, 5 and 15 Amp flush type complete all as specified and as directed. |
| 18 | Supply and fixing ceiling rose surface bakelite 65x50mm three terminal complete all as specified and as directed. |
| 19 | Supply and fixing lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as specified and as directed. |
| 20 | Supply and fixing stepped type electronic fan regulator, two module size, flush type complete all as specified and as directed. |
| 21 | Supply and fixing Ding Dong AC. 230 volts,single pole complete all as directed. |
| 22 | Supply and fixing Bell, AC, 230 volts, single pole complete all as specified and as directed. |
| 23 | S& F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V complete all as specified and as directed. |
| 24 | Materials and Labour forforwiring with 2 runs of 1.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.5 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down oldwiring and type of conduit complete all as specified and directed. Note: 2 run of 1.5 Sqmm cable and 1 run of 1.5 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 25 | M&L for sub main wiring with two runs (P-N) of single core 1.5 Sqmm (nominal area) FRLS PVC insulated and unsheathed copper conductor cable 1100 volts grade having multi-stranded copper conductor with earthing cable of FR PVC insulated and unsheathed multi-stranded copper conductor of size 1.5sqmm single core as earth continuity wire drawn through PVCconduit complete all as specified and directed. (Two single core 1.5 Sqmm cable and one single core 1.5 Sqmm earth conductor cable shall be measured as one run). |
| 26 | Materials and Labour forforwiring with 2 runs of 2.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 2.5 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down oldwiring and type of conduit complete all as specified and directed. Note: 2 run of 2.5 Sqmm cable and 1 run of 2.5 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 27 | Materials and Labour forfor Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 28 | Materials and Labour forfor Sub main wiring with 2 runs of 6.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 29 | Supply and fixing in repairsbatten type LED light fitting 1x 20W, 220V,AC decorative type with internal SPD upto 4kV and overload voltage protection upto 440V includingflexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 30 | Supply and fixing in repairs wall mounteddecorative luminaire in design mesh suitable for 10W LED lampB22 base ,including lamp of 10watt .Complete as directed as specified complete all as specified and as directed. |
| 31 | S & F in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and as directed. |
| 32 | Materials and Labour for plate earthing completewith galvanizedmild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than2.25 m deep below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth lead wire 4 mm dia or 8 SWG bolted (with GI nuts, bolts & check nuts) and earth plate electrodeat one end and connected to main switch board/ DBs etc. at the other, earth strip encased(protected) in and including 15 mm boreGIpipe medium gradewith all fittings from top of electrode to main switch board/ DBs etc fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work complete all as specified and shown in electrical plate No 3 of SSR Pt-I. |
| 33 | Taking down ceiling fans 1400mm /1200mm sweep ,sealing cable end ,dismantling blade & removing the sameand refixing on same location or other location of any type/make and size carefully from fan hook, and transporting from any location in side army area to MES E/M store yard and back after repairing complete all as specified and directed Note :- (i) Defective/unserviceable parts replaced will be paid separately in respective item of Sch \"A\" as Supply only. (ii)The cost of taking down unserviceable parts included in this item. |
| 34 | Material and labourfor painting of ceiling/exhaust fan complete with blades ,in situ with synthetic enamel paint by spraying including filling cavities with filler ,ones coat after cleaning all dust etc.complete all as specified and as directed. |
| 35 | Rewinding Ceiling fan by cutting the existing copper winding of ceiling fan 1200/1400 MM capacity and make any type with super enamelled copper wire of suitable size incl all insulating materials varnishing and neating complete incl satisfactory testing of fan on full load to entire satisfaction of Engineer-in-Charge complete all as specified and directed. |
| 36 | Rewinding Ceiling fan by cutting the existing copper winding of ceiling fan Heavy Duty old model 1200/1400 MM capacity and make any type with super enamelled copper wire of suitable size incl all insulating materials varnishing and neating complete incl satisfactory testing of fan on full load to entire satisfaction of Engineer-in-Charge complete all as specified and as directed. |
| 37 | Supply onlyfan bearing of size 6201/6202 suitable for ceiling fan 1200/1400mm sweep complete all as directed. |
| 38 | Supply onlyrubber reels incl shackle clamp, bolts, nuts, washers split pins of appropriate size as required complete all as specified and directed |
| 39 | Supply only down rod made of 15mm dia GI pipe heavy duty 45 cm long incl machining/ threading/drilling hole of size suitable for nuts and bolts washer and split pin suitable for any size and make of fan complete all as specified and directed. |
| 40 | Supply only plastic canopy upper and lower of any size and make of ceiling fan fixed with suitable size of screws complete all as specified and directed. |
| 41 | Taking down exhaust fan of size 200mm to 400mm sweep of any make and refixing on same location or other location carefully from site & transporting from any location inside Army areato MES E/M store yard for stripping of fan washing thoroughly of bearing/bush by petrol, washing fan blade body etc thoroughly provision of new greasing replacement of worn out/defective unserviceable parts (wherever necessary) assembling the same incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction of EIC complete all as directed.Note :- (i) Defective/unserviceable parts replaced will be paid separately in respective item of Sch \"A\" as Supply only. (ii)The cost of taking down unserviceable parts included in this item. |
| 42 | Rewinding the armature for 200mm to 400mm sweep exhaust fan any make with super enamelled copper wire of suitable size with and including all insulating materials varnishing complete all as specified and directed. |
| 43 | Supply only ball bearing of size suitable for exhaust/wallfan upto 400 mm sweep complete all as specified and as directed. (Make : NBC/SKF/SBBI) |
| 44 | Supply and fixing in repairs for capacitor ISI marked 230/240/250 volts AC 4 MFD suitable for exhaust fan incl condenser spacer and soldering of condenser wire to fan wire and fixing complete all as specified and as directed. |
| 45 | Supply and fixing in repair of unsv switch piano, flush type single pole one way 5 Amps 230 voltcomplete all as specified and as directed. |
| 46 | Supply and fixing in repair of unsv switch flush type 15 Amp single pole one way.complete all as specified and as directed. |
| 47 | Supply and fixing in repair/ replacement of unsv socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as directed. |
| 48 | Supply and fixing in repair of unsv switch socket combination outlet2-in-1, 5 Amp flush type complete all as directed. |
| 49 | Supply and fixing in repair/ replacement of unsvr switch socket combination multipurpose, 2 in 1, 3 pin, 5 & 15 Amp flush type complete all as directed. |
| 50 | Supply and fixing in repair/ replacement of unsv socket outlet 3 Pin 15 Amp 240 volts .complete all as specified and as directed. |
| 51 | Supply and fixing in repair of unsv ceiling rose surface bakelite 65x50mm three terminal complete all as specified and as directed. |
| 52 | Supply and fixing in repair of unsv lamp holder insulated PVC/Polycarbonate/bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as specified and as directed. |
| 53 | Supply and fixing in repair of unsv stepped type electronic fan regulator, flush type complete all as specified and as directed. |
| 54 | S & F in repair PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep for mounting switches. |
| 55 | Supply and fixing in repair of unsvfan capcitor 2.5 Mfd suitable for 1200/1400mm sweep ceiling fan complete all as specified and as directed. |
| 56 | Supply and fixing in repairfor factory made, sheet steel distribution boards, TPN, 4 Way,double door,with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-0 using 12.5 mm graded stone aggregate complete all as specified and as directed. |
| 57 | Supply fix in repairMCB DB of sheet metal enclosure double door SPN 8 way with 200 A rated bus barand grouted in wall with PCC(1:2:4) type B-0 using 12.5 mm graded stone aggregate complete all as specified and as directed. |
| 58 | Supply andfix in repairMCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-0 using 12.5 mm graded stone aggregate.complete all as specified and as directed. |
| 59 | Supply andfix in repair MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA,B-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed. |
| 60 | Supply and fixing in repairMCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,B-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed. |
| 61 | Supply and fixing in repairMCB Tripple pole and neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified and as directed. |
| 62 | Supply and fixing in repair for MCCBs 415 V, 16 KA, four pole, 63 Amps complete all as specified and as directed. |
| 63 | Supply and fixing in repair for MCCBs 415 V, 16 KA, four pole, 100 Amps complete all as specified and as directed. |
| 64 | Supply and fixin repair modular fan regulator,120 W, 2module.complete all as specified and as directed. |
| 65 | Supply and fixingin repair modular switch 1 way 6 amp, 1 module complete all as specified and as directed. |
| 66 | Supply and fixingin repair modular switch 1 way 16 amp, 1 module.complete all as specified and as directed. |
| 67 | Supply and fixingin repair modular switch 2 way 6 amp, 1 module complete all as specified and as directed. |
| 68 | Supply and fixingin repair modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 69 | Supply and fixingin repair modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 70 | Supply and fixing in repair modular Bell push 6A, 1 module complete all as specified and as directed. |
| 71 | Supply and fixing in repair modular white cover plate with frame, 1 module complete all as specified and as directed. |
| 72 | Supply and fixing in repair modular white cover plate with frame, 2 module complete all as specified and as directed. |
| 73 | Supply and fixing in repair modular white cover plate with frame, 3 module complete all as specified and as directed. |
| 74 | Supply and fixing in repair modular white cover plate with frame, 4 module complete all as specified and as directed. |
| 75 | Supply and fixing in repair modular white cover plate with frame, 6 module complete all as specified and as directed. |
| 76 | Supply and fixing in repair modular white cover plate with frame, 8 module complete all as specified and as directed. |
| 77 | Supply and fixing in repair metal flush box 1/2 module for modular switches complete all as specified and as directed. |
| 78 | Supply and fixing in repair metal flush box 3 module for modular switches complete all as specified and as directed. |
| 79 | Supply and fixing in repair metal flush box 4 module for modular switches complete all as specified and as directed. |
| 80 | Supply and fixing in repair metal flush box 6 module for modular switches complete all as specified and as directed. |
| 81 | Supply and fixing in repair metal flush box 8 module for modular switches complete all as specified and as directed. |
| 82 | Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed /surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 83 | Supply and fixing in repairLED building security light of capacity 60 Watt made up of pressure die cast aluminium housing withhigh power LED as light source and lens embedded PC cover including electronic driver should have luminaire efficacy ≥110 lumens/watt,CRI>70 ,PF > 0.95,CCT=5700±300,IP66,impact resistance IK 07 ,inbuiltprotection against lightning , over voltage , short circuit and surge/spike protection upto 10kV including connection with PVC insulaed PVC sheathed, multistranded copper conductor cable of size 1.5 sqmmX 3 core from light fitting to ceiling rose complete all as specified and as directed. |
| 84 | Taking down old UNSV bulkhead/security fitting type and Supply and fixing in repairLED building security light of capacity 35 Watt made up of pressure die cast aluminium housing withhigh power LED as light source and lens embedded PC cover including electronic driver should have luminaire efficacy ≥110 lumens/watt,CRI>70 ,PF > 0.95,CCT=5700±300,IP66,impact resistance IK 07 ,inbuiltprotection against lightning , over voltage , short circuit and surge/spike protection upto 10kV including connection with PVC insulaed PVC sheathed, multistranded copper conductor cable of size 1.5 sqmmX 3 core from light fitting to ceiling rose. |
| 85 | Materials and labour for GI bracket made out of 40 mm bore light grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape all as directed, length of GI pipe shall not be less than 2.0 metre for fixing of light fittings including taking out old bracket complete all as specified and as directed. |
| 86 | Materials and labour forearth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wirecomplete all as specified and as directed. |
