Tender For Work For Relay Configuration For Data Validation With Sldc For Fisrt Time Charging Of 160 Mva Tf (Tal Make) , Rectification Of Issues In 220 Kv Bus Bar Relay And Other Associated Works At 220Kv Substation Kursi Road, Under Etd-Ii Lucknow, Lucknow-Uttar Pradesh
TDR : 49288338
Tender Notice
BOQ
Expired
Lucknow
Uttar Pradesh
Tender For Work For Relay Configuration For Data Validation With Sldc For Fisrt Time Charging Of 160 Mva Tf (Tal Make) , Rectification Of Issues In 220 Kv Bus Bar Relay And Other Associated Works At 220Kv Substation Kursi Road, Under Etd-Ii Lucknow
Name of Work : WORKFOR RELAY CONFIGURATION FOR DATA VALIDATION WITH SLDC FOR FISRT TIME CHARGING OF 160 MVA TF (TAL MAKE) , RECTIFICATION OF ISSUES IN 220 KV BUS BAR RELAY AND OTHER ASSOCIATED WORKS AT 220KV SUBSTATION KURSI ROAD, UNDER ETD-II LUCKNOW
Sl. No.
Item Description
1
Work related to Integration of HV & LV Bay of newly installed 220/132 KV 160 MVA TF TAL Make with existing SCADA system and its real time data validation with SLDC from existing Siemens make RTU cum Gateway AK8000
2
Data configuration of 220/132 KV 160 MVA TF HV and LV bays in Hot and Standby Gateway by using IEC60870-5-104 protocol, for its communication and Data Validation with SLDC Lucknow. ( 01 Job for 01 Bay, Total Bays: 02 including HV and LV Bays)
3
Configuration / re-installation of .ICD/.CID files in BCUs of following bays:i. 160 MVA TF HV & LV Bays- Relay Model 7SJ64ii. 220KV PGCIL Ckt-I & II -Relay Model 7SJ64 & 7SA611Above configuration to be done as per IEC61850 protocol. ( 01 Job for 01 Bay)
4
Re-configuration and modification in existing scheme of settings of relay settings in Siemens make REF relay as per LOW IMPEDANCE requirements given by T&C division, for REF relay installed in C&R panel of newly installed 220/132KV 160 MVA TF (TAL Make)
5
Dismantling the GPS receiver from 220KV S/S Barabanki under ETD-III Lucknow, installation at 220KV S/S Kursi Road, its configuration with HV & LV BCUs at the substation for real time Data Validation with SLDC Lucknow,and again dismantlingfrom 220KV S/S Kursi Road and re-installation at 220KV Barabanki S/S after completing work satisfactorily with due safety precautions.
6
Work related to checking healthiness of Bus Bar Protection Scheme, rectification of issues and taking Bus Bar Protection relay into service at 220KV substation Kursi Road:
7
Flashing of relay card to eradicate errors in the Bus Bar Protection Relay (Model No. SIROTEC 7SS52), Upgradation of firmware in the protection relay with current version as per requirement and checking complete healthiness of Bus Bar Protection scheme.
8
Deputation of Relay Engineer for trouble shooting the issues in Master Control Unit (MCU) in 220KV Busbar Relay, Dismantling the Main Bus Bar Unit from control & relay panel at 220KV S/S Kursi Road Lucknow, its safe transportaion to Siemens factory in Goa for detailed issue analysis and rectification as per condition, transportation back to site and re-installation at 220KV S/.S Kursi Road Lucknow (including to and fro freight charges)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.