Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-06-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-06-2025 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out in any type of soil complete all as specified and directed. |
| 2 | Returning filling in incl spreding levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 3 | Removing excavated material (soil) not exc. 50 mtr and depositing where directed at a level n. exc. 1.50 mtr above the starting point complete all as specified and directed. |
| 4 | Demolition of brickwork/ stone masonrybuilt in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 5 | M&L for Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 complete all as specified and directed. |
| 6 | M&L for Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and directed. |
| 7 | Taking down cement plaster of any description including raking outjoints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 8 | M&L for Rendering 15mm thick in cement and sand mortar 1:4 using liquid water proofing compound on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately under respective item @ 200ml per bag of cement) |
| 9 | M&L for rendering 10 mm thick in cement and sand mortar 1:6 on brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for rendering 10 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 11 | Rendering 10 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling/Top and sides of chajjas/facia of roof projection incl necessary formwork including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 12 | Supply only liquid water proofing compound. |
| 13 | M&L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and directed. |
| 14 | M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 15 | M&L for preparation of newly plastered surface of walls and applying two coats of Oil Bound Distemper over a coat of primer complete all as specified. |
| 16 | M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified. |
| 17 | M&L for preparation of newly plastered surface of walls and applying two coats of Acrylic Emulsion over a coat of alkali resistant primer complete all as specified. |
| 18 | M&L for complete removal of existing treatment of any description on walls, complete all as specified and directed. |
| 19 | Applying one coat of wall care putty not more than 2mm thick complete all as specified and directed. |
| 20 | M&L for preparation of existing surfaces incl washing, rubbing down and stopping of painted surfaces of walls and applying two coats of white wash complete all as specified and directed. |
| 21 | M&L for preparation of existing surfaces incl washing, rubbing down and stopping of painted surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 22 | M&L for preparation of existing surfaces incl washing, rubbing down and stopping of distempered and painted surface of walls and applying two coats of Oil Bound Distemper complete all as specified and directed. |
| 23 | M&L for preparation of existing surfaces incl washing, rubbing down and stopping of painted surface of walls and applying two coat of cement base paint complete all as specified and directed. |
| 24 | M&L for preparation of existing surfaces incl washing, rubbing down and stopping of painted surface of walls nd applying two coat of Acrylic Emulsion complete all as specified and directed. |
| 25 | M&L for painting to old painted surfaces of wood or wood basedsurfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, with two coat of synthetic enamel paint complete all as specified and directed. |
| 26 | M&L for preparation ofold painted steel surfaces of any descriptionexc 10 cm width or girth and painting with two coat of synthetic enamel paint complete all as specified and directed. |
| 27 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 28 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 29 | M & L for plain cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in copings, benching, haunching, bond stones bed and the like including use of necessary form work complete all as specified and directed. |
| 30 | M&L for plain cement concrete Type D-2, 1:4:8 (40 mm graded crushed stone aggregate) as in sub base forpavement, path etc, complete all as specified and directed. |
| 31 | M&L 75mm thick PCC 1:4:8, type D-2 as in sub base forpavement, path etc, complete all as specified and directed. |
| 32 | M&L cement concrete 1:4:8 type D-2 in bed to drain pipes incls packing underand haunching against the sides of pipes after they are laid and tested of bore 150mm dia drain pipe complete all as specified and directed. |
| 33 | M&L cement concrete 1:4:8 type D-2 in bed to drain pipes incls packing under and haunching against the sides of pipes after they are laid and tested of bore 200mm dia drain pipe complete all as specified and directed. |
| 34 | M & L for Reinforced concrete pipes for 150mm internal dia, class NP-2, laid in trenches and jointed with collar complete all as specified and directed. |
| 35 | M & L for Reinforced concrete pipes for 200mm internal dia, class NP-2, laid in trenches and jointed with collar complete all as specified and directed. |
| 36 | Cutting into existing manholes for connecting pipe of minimum 150mm internal dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and directed. |
| 37 | M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified. |
| 38 | M&L for 100mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring including finishing the top rough surface even & smooth, complete all as specified. |
| 39 | M&L for Non - skid coloured Ceramic Joint free exterior grade tile 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade oftiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified. |
| 40 | M&L for for Cement concrete 1:3:6, type C-1(using 20mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 41 | M&L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough complete all as specified. |
| 42 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified. |
| 43 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade oftiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified. |
| 44 | M & L for Non - skid Ceramic joint free tiles 7 to 8 mm thick coloured/wooden finish (square/ rectangular)area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified. |
| 45 | M & L for Non - skid Ceramic joint free tiles 7 to 8 mm thick coloured/wooden finish (square/ rectangular)area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified.. |
| 46 | M&L for Glazed coloured ceramic tile 450 x 300 x 7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified. |
| 47 | M&L for 18mm thick Zed Black Granite machine cut in any position bull nosed on front face, laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and directed. |
| 48 | M & L for Machine cut kota stone slab flooring 16-18 mm thick over and incl 10 mm thick rendering in cement and sand mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in riser of steps/ pillars/ skirting/ dado including rubbing and polishing complete all as specified and directed. |
| 49 | M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc over and including 15 mm thick screed bed in cement and sand mortar 1:6,. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed. |
| 50 | M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting/dado etc. over and including 10 mm thick plaster in cement and sand mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed. |
| 51 | Taking down chowkhats or frameswith shutters (without taking off shutters from the frames) of area n. exc 1.5 Sqm each and removing from site complete all as specified and directed. |
| 52 | Taking down chowkhats or frameswith shutters (without taking off shutters from the frames) of area exceeding 1.5 sqm and not exceeding 4.00 sqm each and removing from site complete all as specified and directed. |
| 53 | Taking down shutters of any description, area not exceeding 1.00 sqm each, complete all as specified and directed. |
| 54 | Taking down shutters of any description, area exceeding 1.00 sqm and not exceeding 2.00 sqm each, complete all as specified and directed. |
| 55 | S & F for Pressed steel frames of size 105 x 60 mm for doors with one or more rebates incl necessary fixing lugs,hinges, lock strike plate, incl filling of PCC 1:3:6 type C-1 using 12.5mm graded stone aggregate as in frames/hold fast blocks complete all as specified and directed. |
| 56 | S & F for Pressed steel frames of size 125 x 60 mm for doors with one or more rebates incl necessary fixing lugs,hinges, lock strike plate, incl filling of PCC 1:3:6 type C-1 using 12.5mm graded stone aggregate as in frames/hold fast blocks complete all as specified and directed. |
| 57 | S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification, complete all as specified and directed. |
| 58 | S & F for Factory made solid panel PVC door shutter 30 mm thick both side prelaminated with wood grain/coloured (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of same colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 59 | S & F for 30 mm thick Factory made Glazed and skeleton shutters made up of 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members as specified supplied and fitted to chowkats complete all as specified and directed. |
| 60 | S & F for 35 mm thick Factory made Plain framed, panelled shutter (two panel) made up of 2nd class hardwood with lock rail and panel of 9 mm commercial ply with commercial veneering on both faces. The size of rail and stile as per specification, kiln seasoned and chemically pressure treated.; sizes of members as specified supplied and fitted to chowkats complete all as specified and directed. |
| 61 | S & F for Box type Steel windows/ventilators comprised oftubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes shall be measured and paid separately)with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts, PCC blocks etc complete all as specified and directed. |
| 62 | S&F PVC Solid frame fixed in Cupboard with x-sectional area of frame between 8 Sqcm to 15 Sqcm complete all as specified and directed. |
| 63 | Supply and fixing factory made 18mm(+ 0.7mm) thick PVC sheet one side prelam sheet for cupboard shutterand finish at all edges complete all as specified and directed. |
| 64 | Supply and fixing factory made 12mm(+ 0.7mm) thick PVC sheet one side prelam sheet for cupboard shutterand finish at all edges complete all as specified and directed. |
| 65 | S & F continous (Piano) type hinges mild steel bright finish or electrogalvanised with wide of flaps 30mm complete all as specified and directed. |
| 66 | S & F for Stainless steel butt hinges, 100 mm long medium weight, complete all as specified. |
| 67 | S & F for 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified. |
| 68 | S & F for 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified. |
| 69 | S & F for 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified. |
| 70 | S & F for Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified. |
| 71 | S & F for Aluminium handles cast type anodised of size 75mm long ISI marked complete all as specified. |
| 72 | S & F for 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified. |
| 73 | S & F for Ball catcher with proper magnetic effect fixed with shutter complete all as specified and directed. |
| 74 | S & F for Hasp and staple of size 100 mm, safety type, aluminium anodised with hinge pin incl bolt to hinge plate and fixed with screw complete all as specified. |
| 75 | S&F20 mm bore stainless steel curtain rod with 1 mm thick wall thickness and each length not more than 1.5 Metre including a pair of brackets and knobs with each length/ piece, fixed on doors and windows opening for hanging curtains complete all as specified and directed. |
| 76 | S&F for Stainless steel wire-cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified. |
| 77 | All as per item No 76 above but fixed in repair complete all as specified and as directed. |
| 78 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces and two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 79 | M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and priming with redoxide zinc chrome and painting with two coats of synthetic enamel paint complete all as specified and directed. |
| 80 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads or in wooden shutters complete all as specified and as directed. |
| 81 | S&F for 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified. |
| 82 | S & F in repair Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing PVC tank of any capacity complete all as specified & directed. |
| 83 | S & F 20mm dia for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight : 20 m m - 210 gms / 25mm-455gms)for 20mm bore fixed complete all as specified and directed. |
| 84 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store for 15mm bore complete all as specified and directed. |
| 85 | All as per Item No 84 above but 20mm bore. |
| 86 | S & F for Steel water tubing medium grade, galvanised, including short lengths, fixed to wall/concealed in wall/ceiling or laid in floor complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc, of 15mm bore complete all as specified and directed. |
| 87 | All as per Item No 86 above but 20mm bore. |
| 88 | S&F for Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc fixed in repairs, complete all as specified. |
| 89 | S & F for Vitreous China wash down water closet pan size 580x440mm coloured with pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.complete etc fixed in repairs, complete all as specified. |
| 90 | S & F for Plastic water closet seat cover, closed pattern with flat bottom, mild steel chromium plated or aluminised hinging device (colour of cover should match with water closet)complete all as specified. |
| 91 | S & F for in repair PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 60/90 cm long etc, complete all as specified. |
| 92 | S&F in repair Vitreous China Wash Basin with full pedestal, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc, complete all as specified and directed. |
| 93 | S & F in repair for Brass CP mixer for mixing hot & cold water in wash hand basin screwed down for iron pipe and fixed for 15mm bore complete all as specified and directed. |
| 94 | S & F in repair for CP Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore fixed in repair complete all as specified and directed. |
| 95 | S & F in repair for CP Stop valve/ Angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair for 15mm bore complete all as specified and directed. |
| 96 | S & F for gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe for 20mm bore complete all as specified and directed. |
| 97 | S&F in reapir for Stainless steel gratings 75mm bore size fixed with cement motar. |
| 98 | S&F in repair for PVC connection 15 mm size, of length 600 mm, with PTMT nuts supplied and fixed complete all as specified. |
| 99 | S&F in repair for 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete supplied and fixed in repairs, all as specified. |
| 100 | S&F in repiar for CP Brass Tubular towel rail 20mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed. |
| 101 | S & F for Soap dish, stainless steel, approximate size 160x 160x90mm complete all as specified and directed. |
| 102 | S & F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 103 | S & F in repair for shower rose of not less than 100mm dia, stainless steel complete all as specified and directed. |
| 104 | S & F in repair for jet spray for EWC incl required length of tube fixed with Existing water tubing/stop cock incl necessary fittings complete all as specified and directed. |
| 105 | S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in trenches/floors/walls for 75 mm bore of pipe fixed in repair complete all as specified and directed. |
| 106 | All as per Srl Item 105 above but 110mm bore of pipe. |
| 107 | S & F for PVC (SWR) floor bend, plain including jointing with solvent cement 75 mm bore in repairs, complete all as specified and directed. |
| 108 | All as per Srl Item 107 above but 110mm bore of pipe. |
| 109 | S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore in repairs, complete all as specified and directed. |
| 110 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal. Complete all as specified and directed by Engineer-In-Charge. |
| 111 | S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal . Complete all as specified and directed by Engineer-In-Charge. |
| 112 | S & F for Steel water tubing light grade 40mm dia, galvanised, including short lengths, fixed as spout as in walls of sunken portion of toilets complete all as specified and directed. |
| 113 | S&F PVC (SWR) vent cowl of 75mm dia complete all as specified and directed |
| 114 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. Complete all as specified and directed by Engineer-In-Charge. |
| 115 | M&L for providing cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in landings, cover slabs upon drainage system incl necessary form work etc, complete all as specified and directed. |
| 116 | Dismantling ofBrick tiles or terracing tiles, single layer on roofs, complete all as specified and directed. |
| 117 | Demolition of Mud in roof , any thickness , including plastering and leeping (weather full thickness removed or a part thereof, complete all as specified and directed. |
| 118 | M&L for roughening surfaces of old/concrete floor by picking, sweeping clean and washing down with water etc, complete all as specified and directed. |
| 119 | M&L for 15mm thick screed bed or bedding layer of mortar in CM 1:3, using WPC, complete all as specified and directed. (Note : WPC shall be measured and paid separately under respective item @ 200ml per bag of cement) |
| 120 | M&L for APP modified roof treatment over existing accessible RCC roof slab/chajjah/canopy/ parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 litre/Sqm manufacture by the same agency as that of APP with a density of 0.87-0.89 Kg per litre at 25 degree centigrade on prepared surface.(c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm reinforced with non-woven polyster fiber of weight not less than 160 gsm/sqm using butane torch by torch application with 10 cm side laps and 15 cm end lap, complete all as specified and directed. |
| 121 | M&L for PCC padding 1:2:4, type B-1(using 20 mm graded crushed stone aggregate) of average thickness 50 mm to be provided in slope fixed with chicken wire mesh, complete all as specified and directed. |
| 122 | M & L for spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green in squares of 300 x 300 mm, complete all as specified and directed. |
| 123 | Cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exceeding 10 cm but not exceeding 20 cm girth, complete all as specified and directed. |
| 124 | M&L for angle, joist, channel or tee sections fixed independently,without connecting plats. Etc. (Fe-290 Gde-E-165). Complete all as specified and directed by Engineer-In-Charge. |
| 125 | M&L for filling of sunken floor with PCC 1:5:10 using 40mm graded crushed stone aggregate including breaking and removal of existing filling of lime concrete/PCC/brick bats and rubbish out off the premises, etc complete all as specified and directed. |
| 126 | M & L for Two Coats of Hot bitumen on newly plastered surface of sunken portion not less than 1.2 Kg/Sqm complete all as specified and directed. |
| 127 | M&L for plasteing in CM (1:3) 15mm thick with WPC (200ml per bag of cement) on walls/ floor as on sunken floor finished even and smooth using extra cement,complete all as specified and directed. (Note- After plaster, testing be carried out in the sunken portion by ponding for 72 hrs before further treatment to check any leakage/seepage. If observed shall be rectified without any extra cost). |
| 128 | S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 129 | M&L for Screed bed or bedding layer of mortar 20 mm thick for layingfloor finishes in cement mortar 1:6. complete all as specified and directed. |
| 130 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors/path with grey cement and pigment to match. Complete all as specified and directed. |
| 131 | M&L for Sand filling under floors including watering and consolidation, complete all as specified and directed. |
| 132 | S&F in repair for fancy type, chromium plated Stop valve with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair for 15mm bore complete all as specified and directed. |
| 133 | S&F for Stainless steel tray for keeping cutlery items fixed in PVC kitchen cabinet area less than 0.15 Sqm with a height 0.20 m complete all as specified and directed. |
| 134 | S&F for Stainless steel tray for keeping dining plates fixed in PVC kitchen cabinet area less than 0.15 Sqm with a height 0.40 mcomplete all as specified and directed. |
| 135 | S&F for Stainless steel tray for keeping kitchen utensils fixed in PVC kitchen cabinet area less than 0.15 Sqm with a height 0.40 m complete all as specified and directed. |
| 136 | S & F for Kitchen cabinet drawer slider made up of steel fixed in PVC cabinet with necessary arrangement for sliding of drawer complete all as specified and directed. |
| 137 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and directed. |
| 138 | Dismantling of plain or corrugated asbestos cement sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 139 | M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified and directed. |
| 140 | M & L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified and directed. |
| 141 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 142 | S & F of false ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) incl GI Frame work using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, complete all as specified and directed. |
| 143 | Dismantling wrought iron or mild steel work of any description not other wise provided for, complete all as specified and directed. |
| 144 | S & F for steel work in tubular trusses/ purlins incl special shaped washer etc, complete using running welded, completed all as specified and directed. |
| 145 | S & F for steel work in tubular trusses/ purlins incl special shaped washer etc, complete using running welded, but fixing only completed all as specified and directed. |
| 146 | S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment completed all as specified and directed. |
| 147 | S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete completed all as specified and directed. |
| 148 | M & L for Septic tank of 10 users as per following specification :-Excavation in any type ofSoil, PCC 1:3:6 in foundation, Brick work in CM 1:4 with necessary chambers, Cement plaster in CM 1:4 in complete internal area, RCC 100mm thick partition wall fixed at specified place, 100mm thick RCC 1:2:4 in cover slab incl one manhole cover at top and PVC vent pipe of 75 mm dia and necessary chamber reqd complete all as specified and directed. |
| 149 | M & L for Septic tank of 25 users as per following specification :-Excavation in any type ofSoil, PCC 1:3:6 in foundation, Brick work in CM 1:4 with necessary chambers, Cement plaster in CM 1:4 in complete internal area, RCC 100mm thick partition wall fixed at specified place, 100mm thick RCC 1:2:4 in cover slab incl one manhole cover at top and PVC vent pipe of 75 mm dia and necessary chamber reqd complete all as specified and directed. |
| 150 | M & L for Soakage well of size 1.80 M internal dia X 3.00 M deep as per following specification :-Excavation in any type ofSoil, PCC 1:3:6 in foundation, Brick work in CM 1:4 with necessary honey combed wall at specified place and necessary chambers, well filled with brick bats of 900mm depth, 100mm thick RCC 1:2:4 in cover slab incl one manhole cover at top and PVC vent pipe of 75 mm dia, complete all as specified and directed. |
| 151 | Taking down carefully aluminium / copper point wiring (light, fan, socket, powerpoint) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc, making good distrubed surfaces of wall, floar, ceiling etc complete all as specified and directed. |
| 152 | M & L for point wiring for one light / fan / bell point with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor (FRLS ) 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel Metal flush mounting box for mounting of fittings like switch , socket and fan regulator and cover plat of suitable modules capacity and make of swich socket complete all as specified and as directed. |
| 153 | (a) One light point controlled by one, one way switch |
| 154 | (b)One fan point controlled by one, one way switch |
| 155 | (c)One socket outlet 3 Pin, 5 Amp on independent board |
| 156 | (d) One socket outlet 3 Pin, 5 Amp on same board. |
| 157 | (e) One bell point controlled by one bell push |
| 158 | (f)One light point controlled by two 2- way switch |
| 159 | All as per item No 152 here in before but 2.5 Sqmm P.V.C insulated unsheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board. |
| 160 | S&Fswitch piano flush type single pole one way 6 Amp (ISI Marked) |
| 161 | S&F switch piano flush type single pole one way 15 Amp (ISI Marked) |
| 162 | S&F switch piano flush type single pole two way 5 Amp.( ISI Marked) |
| 163 | S&F socket out let 2 in 1, 3 pin 5 Ampflush type (ISI Marked) |
| 164 | S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) |
| 165 | M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) |
| 166 | Taking down old unserviceable regulator & supply & fix electronic type fan regulator stepped type on existing phenolic laminated sheet etc. suitable for ceiling fan. |
| 167 | S & F in repair Bell push flush type 5 amp ( ISI Marked). |
| 168 | S & F in repair Buzzer/Ding Dong, A C , 230 volt single pole (ISI Marked) |
| 169 | S & F in repairPVC/Polycarbonate Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings type with back plate suitable for batten fittingscomplete all as specified and as directed. Make: Anchor/ Legrand/ Havells |
| 170 | Taking doun old unsv sub main and M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductormulti-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Two run of 6.00 Sqmm cable one run of 6.00 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.) |
| 171 | Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed. |
| 172 | Supply and fix LED decorative box batten type light fitting20 watt with LED Tube rod4 feet 20 wattalong with all accessories, pre-wired fixed on wall/ceiling and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed by Engineer-in-charge. |
| 173 | S&F in repair LED mirror light fitting 2 ft in 10 watt. along with all accessories, pre-wired fixed on wall/ceiling and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed by Engineer-in-charge. |
| 174 | Supply and fixing in repair LED Security light fitting 35 watt Pressure die cast aluminium housing, heat resistant toughened glass with frame IP 66 Protection complete fitting including1.5 mtr long 40/50 mm (Suitable size for fixing of LED light fitting) bore GI pipe mounting bracket/Clamp made to shape for fixing on pole with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washersall as specified and directed by Engineer-in-Charge. Note : Contractor shall provide 1 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion. |
| 175 | Supply and fix in repairLED Bulk head fitting 10 watthighly cost effective compact, ultra low energy, modern design utility bulkhead suitable for indoor and outdoor applications with IP 65 protectionwatt complete with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed by Engineer-in-Charge. |
| 176 | S & F in Repair sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with 200 Amps rated bus bar all as specified and directed by Engineer-in-Charge. |
| 177 | Supply and fixing in repair powder coated sheet metal enclosure indoor type (size width 1000mm, height 750mm,depth 200mm) made out of 2mm thick CRCA sheet having independent compartments suitable for single phase energy meters) and MCB’s provided with front hinged shutters with locking arrangements and clear glass to visualize the meter reading without opening the compartment with sufficient working space in compartment; duly prewired with single core PVC insulated and sheathed FRLS stranded copper conductor wire of suitable size from bus bar to meter compartment 04 Nos duly crimped with copper thimbles, duly powder coated having one number cable gland for suitable size of LT XLPE/ PVC cable entry at bottomcomplete all as specified and directed and consisting with the following:- (a) Bus bar for 3 phase 4 wire system of 4 x 100 Amps rated insulated copper strip mounted on resin cast insulators in independent compartment having front open able shutter - One Set.(b) MCB , four pole, 415 volts, 100 Amps, 10 KA -One No.(c) MCB SPN, 40 Amps, 10 KA C-curve-04 Nos.(d) Voltmeter 0-500 volts with selector switch -one set.(e) Indicator lamps LED in red in red/yellow/ blue colour- One set of Three.Note:- Existing meters shall be dismantled & re-fixed in panel by contractor and make cable connection properly through LT cable joint with lugs of suitable size rates are deemed to include for the same. |
| 178 | Taking down old unsv MCB and Supply and fixingSP 6 To 32 AMP amp rating 240V, 10KA \"C\" curve miniature circuit breaker(MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified. |
| 179 | All as per item No 172 above but SPN 32 AMP |
| 180 | All as per item No 172 above but SPN 40 AMP |
| 181 | Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1400mm sweep, with Squirrel cage induction motor all as specified and directed by Engineer-in-Charge. |
| 182 | Supply and fix water heater storage type electric, capacity 25 litres BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces and complete all as specified and as directed by Engr-in-Charge. |
| 183 | Supply and fixingPVC connection cold water pipe 18\" long, 15mmdia with brass jem nut and wahser, both side complete all as specified and directed by Engineer-in-Charge. |
| 184 | All as per ser item No 177 here in before but hot water pipe made of chromium plated brass flexible tubing. |
| 185 | Supply and fixing stop cock brass of size 15 mm dia complete all specified and as directed. |
| 186 | Supply and fix exhaust fan, made of sturdy engineering plastic AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers cutting of the holes in existing wall and making good the surfaces all as directed. |
| 187 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers cutting of the holes in existing wall and making good the surfaces all as directed . |
| 188 | Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 35 Sqmm 3.5 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge. |
| 189 | Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed. |
| 190 | Material and labour for brick protection using old size sub class ‘B’bricks, laid flat, dry adjacent to each otherlaid length wiseperpendicular to theaxis of cable complete all as specified and directed. |
| 191 | M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
