|
| 1 | Taking down chowkats with shutters (without taking off shutter from the frames) not exceeding 1.50 Sqm eachcomplete all as specified and directed. |
| 2 | Taking down chowkats with shutters (without taking off shutter from the frames) exceeding 1.50 Sqm but not exceeding 4.00 Sqm each completeall as specified and directed.(Note for Item No. 1.00 & 2.00 - Rate shall be deemed to be include for cuttingholes/demolition of masionry walls etc for taking down chowkats and making good the damaged surfaces). |
| 3 | Taking down shutters any type not exceeding 1.00 Sqm and removing from site completeall as specified and directed. |
| 4 | Taking down ofshutter of any description exceeding 1 Sqm but not exceeding 2.0 Sqm each complete all as specified and directed. |
| 5 | Taking down of shutters of any description exceeding 1 Sqmbut not exceeding 2 Sqm each and refixing in sameopening after easing and adjustingcompleted all as specified and directed. |
| 6 | Demolition of cement concrete (unreinforced) as in ground floors or paving not exceeding 15cm thick below or above ground level complete all as specified and directed. |
| 7 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed. |
| 8 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlars facing dressed stonework & precast concrete articles complete all as specified and directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing unserviceable tiles to the low lying areas of defence land and rubbish off the premises complete all as specified and directed. |
| 10 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. |
| 11 | Taking down cement plaster of any description on brick or stone or concrete surface of wall etc includingraking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 12 | M&L for broken brick hardcore of gauge not exceeding 63mm, deposited spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 13 | M&L for brick work with sub class \"B\" bricks locally available best quality straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and directed. |
| 14 | M&L for brickwork with subclass \"B\" brickslocally available best quality , straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed. |
| 15 | Supply only integral water proofing compound liquid, ISI markedcomplete all as specified and directed. |
| 16 | M&L for cutting chases, in brick wall, pinning in and making good to facing where required and pointing in cement mortar (1:3), to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc and cuttingchases for concealed water tubing etc and making good the disturbedsurface, cutting exceeding 10 cm but not exceeding 20cm girth complete all as specified and directed. |
| 17 | M&L for cutting holes into or through brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar exceeding half brick but not exceeding full brickwork for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 as required complete all as specified and directed. |
| 18 | M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in surface channel and drains etc complete all as specified and directed. |
| 19 | M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 20 | S&F of factory made solid PVC door frame of size 50mm X 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing as mentioned in SSR Part-II (2020), Section 8, Page No. 178 complete all as specified anddirected. |
| 21 | S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification & drawing as mentioned in SSR Part-II (2020), Section 8, Page No.174 completeall as specified anddirected. |
| 22 | S&F of second class hard woodplain, solid, straight chowkats and frames, wrought, framed rebatedon the solid, rounded or chamfered put together with glue pinned at jointsetc complete all as specified and directed. |
| 23 | S&F of 35 mm thick second class hardwood plain framed pannelled shutters (factory made) feather edged (any numbers of panels) with both sides or venneered particle board medium density wood particle board with commercial face venners supply and fitted to chowkat complete all as specified and directed. |
| 24 | S&F of 30mm thick second class hard wood glazed/ gauge & skeleton shutters (factory made) for windows & doorsopen rebated & prepared to receive glass, gauge etc. (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitered beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section-8, Clause 8.24 (b) (larger size to be provided) complete all as specified and directed. |
| 25 | S&F in repairs of aluminium extuded body door closer hydraulicallyregulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg asfixedcomplete all as specified and directed. |
| 26 | S&F of 150mm size aluminium plate type II Gate and shutter hook and eye complete all as specified and directed. |
| 27 | S&F of 100 mm long cold rolled mild steel butt hinges, medium weight completeall as specified and directed. |
| 28 | S&F of 75 mm long cold rolled mild steel butt hinges, medium weight completeall as specified and directed. |
| 29 | S&F of 100 mm long aluminium, anodised, barrel tower bolts of extruded sectionand fixed complete all as specified and directed. |
| 30 | S&F of 150 mm long aluminium, anodised, barrel tower bolts of extruded sectionand fixed complete all as specified and directed. |
| 31 | S&F of 150 mm long aluminium anodised extruded alloy handle fabricated type complete all as specified and directed. |
| 32 | S&F of 100 mm long aluminium anodised extruded alloy handle fabricated type complete all as specified and directed. |
| 33 | S&F of 300 mm aluminum alloy, anodised , sliding door bolt with hasp and staple (bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed. |
| 34 | S&F of Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples completeall as specified and directed. |
| 35 | S&F of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor (overall length of cover plate 150mm) complete all as specified and directed. |
| 36 | S&F of mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/orforged into spikes; framed guard bars; barred iron doors; ladders, railings, framed brackets, walk ways, frame work of water tank and similar work conforming to Fe-290-0Gde-E-165 completeall as specified and directed. |
| 37 | S&F ofrolled mild steel angle iron roof trusses (framed) and purlins, rafters crane gantries, rails, heavy brackets etc including distance pieces, cleats, angle, tee etc including necessary cutting , welding etc complete Fe-410W (Gde E-250) quality \"A\"complete all as specified and directed. |
| 38 | S&F of anodised (powder coating of minimum thickness 50 micron) aluminium window/ventilators shutters, sliding/fixed type without sash bar, aluminum section weighing0.55 Kg/m, including necessary joining cleat, glazing clips, rubber neoprene packing,hinges type B-21100 mm long (02 Nos), peg stay 150mm long (01 No), anodised aluminium snap beading, screws etcincluding locking arrangement, roller after and including taking down of existing old unserviceable shutter completeall as specified and directed. |
| 39 | S&F of anodised (powder coating of minimum thickness 50 micron) aluminium door shutters (powder coated), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including locking arrangement, roller after completeall as specified and directed. |
| 40 | S&F of anodised aluminium frame of doors, windows, ventilators with one or more rebates including joining cleat for fixing for completeall as specified and directed. |
| 41 | M&L for providing and fixing false ceiling of designer tile ivory painted (high pressure steam cured ) of 4mm thick (as per IS: 14862) of size 595x595mm and any one of the design (cascade or electra) in true horizontal level. Suspended on interlocking metal grid of hot dipped galvanized steel section (galvanized @120gms both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.3mm sheet 1200mm long spaecd between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturers instructions/literature. GI adjustable wire of 4mm dia with galvanized butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section of 4mm dia GI wire shall be pre-painted with with polyster paint and black painted groove at centre of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engr-in-charge. |
| 42 | M&L Solid PVC Wall Lining consisting of 5mm thickwood grain print single side any colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawingfixed to walls complete all as specified and directed. |
| 43 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame and match with wall lining shade complete all as specified and directed |
| 44 | S&F 18/19mm thick solid PVC composite sheet, prelaminated on front side and plain matching dark shade laminated background as in kitchen cabinet shutters, backing, sides, top/bottom, etc, fixed with and incl SS flush screws incl necessary cutting for reqd shape, rebate, hinges, hooks, etc and fixing only of self closing hinges, wall hanging hooks, magnetic locks, handles, etc complete all as specified and as directed.(Notes:- (i) Necessary hinges, hooks, handles & locks shall be measured & paid separately as \"Supply Only\" under relevant item.(ii) Labour charges for \"supply only\" items are deemed to be included with quoted rates) |
| 45 | Supply only heavy duty Slim Nickel plated Stainless steel magnetic catch (L shape) with strong earth magnet, size 11mm x 35mm x 4mm complete all as specified and directed. |
| 46 | Supply only heavy duty stainless steel slip on hinges, self closing type with opening full overlay or 105°, suitable for 25mm thick shutter of maximum size 850mm x 550mm complete all as specified and directed. |
| 47 | Supply only ergonomically designed powder coated Aluminium anodised handle, finger pull type, suitable for 19mm thick shutter, size 14mm x 43mm complete including finish complete all as specified and directed.(Notes for item No. 45.00 to 47.00 :- Material for Item No. 45.00 to 47.00 to be incorporated in Item No. 44.00 here-in-before) |
| 48 | Dismantling of asbestos cement (corrugated, semi-corrugated etc.) sheets in roof coverings complete all as specified and directed. |
| 49 | S&F of 6mm thickasbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with self tapping screw (Heavy duty)/ Coach screw with inbuilt washers and neoprene & EDPM washers if required complete all as specified and directed. |
| 50 | Dismantling plain or corrugated steel sheeting, any gauge, thickness or pattern of roof covering complete all as specified and directed. |
| 51 | S&F of pre-painted galvalume aluminium zinc coatingGI based plain steel sheet of 0.50mm thick of any colour as approved by GE having tensile strength of 550 Mpa as in ridge/wall/cladding, fixed with self tapping screws complete all as specified and directed. |
| 52 | M&L for 12 mm thick prelaminated particle board, exteriorgrade, prelaminated both side with decorative choice lamination, fixed with screws to aluminum frame work for cupboardshutter complete all as specified and directed. |
| 53 | M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, paving, floor, hard standing etcincluding finishing the cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 54 | M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in sub base floor complete all as specified and directed. |
| 55 | M&L for 100 mm thick cement concrete (1:2:4) type B-2 (using 40 mm graded crushed stone aggregate) as in sub base floor finishing the surface even and fair complete all as specified and directed. |
| 56 | M&L for 25mm (avg) thickPCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate)as in leveling course complete all as specified and directed. |
| 57 | M&L for non skid (joint free) ceramic coloured tiles of 7 to 8 mmthick(square/rectangular) area of each tileexceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurryand pointed with white cement mixed with pigment to match with shed of tiles over and including 15mm thick screed bed or beading layer of cement mortar (1:4) for laying floor finishes completeall as specified and directed. |
| 58 | Ditto-all as per Item No.57.00 here-in-before but in skirting/dado over and including a backing coat of 15mm thick cement plaster in cement mortar (1:4)for laying floor finishes complete all as specified and directed. |
| 59 | M&L for non skid (joint free) ceramic coloured tiles of 7 to 8 mmthick(square/rectangular) area of each tileexceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurryand pointed with white cement mixed with pigment to match with shed of tiles over and including 15mm thick screed bed or beading layer of cement mortar (1:4) for laying floor finishes completeall as specified and directed. |
| 60 | M&L for 20-22mm thick machine cut kota stone slab flooring (pre-mirror polished)over and including 20mm thick screed bed of cement mortar (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeall as specified and directed. |
| 61 | Ditto-all as per Item No.60.00 here-in-before but in skirting/dado over and including a backing coat of 10mm thick cement plaster in cement mortar (1:4)for laying floor finishes complete all as specified and directed. |
| 62 | M&L for 18-20mm thick green marble (any type) work (table rubbed and polished) machine cut in steps, jambs, pillars, windowcill, cooking platform etc bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the granite stone including and polishing over and including 15mm thick cement mortar (1:4) as screed bed complete all as specified and directed. |
| 63 | M&L for 60mm thick machine pressed precast concrete interlocking paver block (coloured and polished)any shape and size with grey cement and pigment confirming to IS 15658-2008 (M-35 grade) laying over and including 50mm thick sand filling complete all as specified and directed. |
| 64 | M&L for glazed ceramic coloured wall tiles (vertical) 350mm x 250mm x 7mm / 450mm X 300mm X 7mm thickor equivalentset and jointed neat cement slurry and pointed with white cement mixed with pigment to match with shed of tiles as in skirting/dado/vertical wall over and including 10 mm thick cementplaster in cement mortar (1:3) complete all as specified and directed. |
| 65 | M&L for pre-polished coloured chequeredcement concrete tiles 30cm x 30cm x 25mm thick (glossy type), set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 15mm thick cement screed bed in cement mortar (1:4)after complete all as specified and directed. |
| 66 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 67 | M&L for rendering 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed. |
| 68 | M&L for rendering 15 mm thick on fair face of brick worksor concretesurfaces of wallswith cement mortar (1:4) in two coats (10mm thick backing coat + 5mm thick plaster) mixed with WPC @200ml per 50 Kg of cement on 5mm thick plaster, finished the surfaces even and smoothwithout using extra cement complete all as specified anddirected. (Note : WPC will be measured and paid separately under relevant item.) |
| 69 | M&L forapplying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer after preparation of new wooden surfaces of any descriptionover 10 cm girth or width complete all as specified and directed. |
| 70 | M&L forapplying two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces of any descriptionover 10 cm girth or width complete all as specified and directed. |
| 71 | M&L for applying two coats of oil emulsion distemper over a coat of alkali resistant primer over and including applying 3mm thick wall care putty newly plastered surfaces of wall after and including preparation of surfaces complete all as specified and directed. |
| 72 | M&L for applying two coats of oil emulsion distemper over a coat of alkali resistant primer over and including applying 3mm thick wall care putty old decorated plaster surfaces of wall after and including complete removal of existing treatment andpreparation of surfaces complete all as specified and directed. |
| 73 | M&L for applying two coats of 100% Premium acrylic emulsion paint(using AIR-LESS PAINT SPRAYER) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces by using AIR-LESS PAINT PRIMER SPRAYER using smart technique including preparation/levelling of new surface of wall using manual sand papers(where reqd) of approved grade complete all as specified andas directed. |
| 74 | M&L for complete removal of existing wall surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @0.90 litre/ 10 sqm over old surface complete all as specified and directed. |
| 75 | S&F of 4.0mm thick sheet glass ordinaryquality and glazing with oil putty or fixed with bead/glazing pins in squares not exceeding 0.50 sqm with solar coated film 25 micron reflective type of each pane completeall as specified anddirected. |
| 76 | S&F of minimum 4.8mm thick and not exceeding 5mm thick sheet glass ordinaryquality and glazing with oil putty or fixed with bead/glazing pins in squares exceeding not exceeding 0.50 sqm with solar coated film 25 micron reflective type of each pane completeall as specified anddirected. |
| 77 | S&F for vitreous china wash basin, white, flat back, size 550 X 400mm, excluding taps, chain and plug and porcelain stopper but including 32mm dia PVC waste pipe, brackets (02 Nos), 32mm size full threaded brass chromium plated waste coupling etc and cutting for and pinning in ends of brackets or erecting stand including making good of disturbed surfaces in CM (1:3) complete all as specified and directed. |
| 78 | S&F in repairs of 15mm dia bib tap, fancy type, cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferule, chromium plated with long screw typefixed completeall as specified anddirected. |
| 79 | S&F in repairsof 15 mm borestop valve/angular stop valve,fancy type, chromium plated ,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionscomplete all as specified and directed. |
| 80 | S&Fin repairs of 15 mm borestop valve,fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionscompleteall as specified and directed. |
| 81 | S&F in repairs of brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges completeall as specified anddirected. |
| 82 | S&F in repairs of75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cementcomplete all as specified and directed. |
| 83 | S&F in repairs of 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated,screweddown high pressure, with letter \"HOT\" or \"COLD\" with long screwed shanks & fly nuts, screwed for iron pipes completeall as specified anddirected. |
| 84 | S&F in repairs of 600mm x 450 mm bevelled edge mirror of selected qualityglass, mounted on 6mm thick AC building board on commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscompleteall as specified anddirected. |
| 85 | S&F in repairs of 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia suitable for low level cistern fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete all as specified and directed. |
| 86 | S&F in repairs of vitreous china squatting pan \"Orissa\" pattern, size 580x440mm white, with integral foot rests with P or S trap (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete including making good to floors with PCC bedding (1:4:8) type D2 using 40mm nominal brick ballast and connection to trap with cement mortar, and making good to floorcompleteall as specified and directed. |
| 87 | S&Fin repairs of vitreous china wash down water closet pan (pedestal pattern) white with \"P\" or \"S\" trap type(excluding flushing cistern & flush pipe)including connection to trap with 110mm PVC (SWR) connection and lip ring & to flushing pipe, anti-syphonage pipeout inwith and including white seat cover etc. including making good to floor complete all as specified anddirected. |
| 88 | S&F in repairs of 15 mmdiaPVC connectionpipe of length 450 mm with 02 Nos brass check nuts complete all as specified anddirected. |
| 89 | S&F in repairs of 15 mmdiaPVC connectionpipe of length 600 mm with 02 Nos brass check nuts complete all as specified anddirected. |
| 90 | S&F of 32 mm bore low density polyethylenepipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to wall or in floors etc. as in outlet pipe for WHB, urinal etc.complete including taking down old unserviceable pipe all as specified and directed. |
| 91 | S&F in repair for Vitreous china urinals, half stall type white (excluding flushing cistern but including flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe completeall as specified and as directed. |
| 92 | S&F of 15mm dia tubes (medium grade) galvanised iron, with all fittings and fixed complete to walls and ceilings or laid in floors, wall etc (surface or concealed type) after and including taking up or down existing unserviceable steel tubing complete all as specified and directed. |
| 93 | Refixing old steel tubings & connections in new or old position (wall, ceiling, floor, trenchetc.) for 15mm bore pipeswith new fittings etc after and including taking up or down existing steel tubing and cleaning the same for reuse complete all as specified and directed. |
| 94 | S&F of 20mm dia tubes (medium grade) galvanised iron, with all fittings and fixed complete to walls and ceilings or laid in floors, wall etc (surface or concealed type) after and including taking up or down existing unserviceable steel tubing complete all as specified and directed. |
| 95 | Refixing old steel tubings & connections in new or old position (wall, ceiling, floor, trenchetc.) for 20mm bore pipeswith new fittings etc after and including taking up or down existing steel tubing and cleaning the same for reuse complete all as specified and directed. |
| 96 | S&F of 25mm dia tubes (medium grade) galvanised iron, with all fittings and fixed complete to walls and ceilings or laid in floors, wall etc (surface or concealed type) after and including taking up or down existing unserviceable steel tubing complete all as specified and directed. |
| 97 | S&F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall orlaid in trenchesor in floor after and including dismantling of existing unserviceablepipe complete all as specified and directed. |
| 98 | S&F of110mm bore PVC(SWR) junction single, (single T)equal or unequal providing access door completeall as specified and directed. |
| 99 | M&L for cast iron \"P’or \"S\" trap of 100mm bore complete complete all as specified and directed. |
| 100 | S&Fof 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 101 | S&F of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall orlaid in trenchesor in floor after and including dismantling of existing unserviceablepipe complete all as specified and directed. |
| 102 | S&Fof 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 103 | S&F of 75mm bore PVC(SWR) junction single, (single T)equal or unequal providing access door completeall as specified and directed. |
| 104 | S&F in repairs ofBrass CP 3 in 1 Wall Mixer for mixing hot & Cold water screwed down for iron pipe and fixed and joint with adhesive, taflon tape, etc complete all as specified and directed. |
| 105 | Disconnecting existing water tanks of (exceeding 250 & not exceeding 500 litres in capacity), setting aside (or lowering if required)and cleaning, removing all scale and dirt etc from tanks and mouth of pipe including hoisting (if required) reconnecting and refixing in position with required fittings complete all as specified anddirected.(NOTE: Date of cleaning must be written at side of water tank with white paints after cleaning of tank) |
| 106 | S&F in repairs of 32mm waste coupling of Chromium plated as completed all as per specified and directed. |
| 107 | S&F in repair of toilet paper holder fixed to walls with chromium plated (CP) brass screws all as specified and directed by Engr-in-Charge. |
| 108 | S&F for 100 mm dia grating doom PTMT (minimum weight 25gms) complete all as specified and directed. |
| 109 | S&F in repairs of 20mm dia aluminium curtail rail with fixing brackets, stops, rollers etc.completeall as specified anddirected. |
| 110 | S&F in repairs ofhealth faucet chromium plated with push bottom, flexible steel pipe with PVC lining of1mtr long suitable for 15mm dia fancy type complete all as specified and directed. |
| 111 | S&F in repairs of 125mm size brass chromium plated shower roses with arms, swivel joints,including fixing to steel pipe or union of 15mm dia complete all as specified and directed. |
| 112 | Dismantling wrought iron or mild steel work of any description etc complete all as specified and directed. |
