|
| 1 | Schedule \"A\" Section - I |
| 2 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsexc 1.50 sqm complete all as specified and as dircted by Engineer-in-Charge. |
| 3 | Supply and fixing 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil puty (or beading, any type) in squares n.exc. 0.5 sqm in each pane complete all as specified anddircted by Engineer-in-Charge. |
| 4 | All as per serial item No - 2.00 here in before but 4 mmthick in squares exc.0.5 sqm in each pane-ditto- |
| 5 | Supply and fixing Figured glass thickness 4 mm, pin hea type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 6 | Supply and fixing in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as dircted by Engineer-in-Charge. |
| 7 | Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures\"s instructions and fixed with self thread making steel screws of length not less than 50mm and incl dismantling old sheets, complete as directed by Engr-in-Charge. |
| 8 | Same as item No 6.00 above but plain steel sheet as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape, cut to designed shape (Jhhallar) etc and incl dismantling old sheets, complete all as specified. |
| 9 | Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161- 1979 grade St.-240 and incl dismantling old iron/mild steel work complete all as specified and directed. |
| 10 | Material and labour for framed work such as grills, gratings, etc with ends of bars sholderedcand /or riveted or forged into spikes, framed guard bars,barred iron dooes,ladders, framed balustereds, walk ways railing frameworks of water tank and similar works and incl dismantling old iron/mild steel work, all as specified and as directed. |
| 11 | Dismantling walls or ceiling boards (fibre, plup insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and as directed by Engr-In- Charge. |
| 12 | Providing and fixing Gypsum Board 12mm thick in ceiling at all height fixed with screw laid on newly exposed Anodised aluminium snap grid frame work of main runner & Hangers GI wire 6mm dia to be fixed by manufacturer approved pattern, complete all as spd & directed by Engr-in-charge. |
| 13 | Supply and fixing PVC insulation panels ceiling of thickness 10mm with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. and GI hangers as per specification and drawing, complete all as specified and directed by Engr-in-charge. |
| 14 | Note: For above Ceiling items No. 11.00 & 12.00 includes conditions (i) To comprise main runner spaced at 1200mm centres securly fixed to the structural soffit at 1200 mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Hangers (GI wire of 4.0mm dia) to be fixed by approved roof plug , level ajdusters and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer tahn 600mm require independant support. 600 x 600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centres(ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.5mm x 25/5 with soffit cleat made of galvanised steel of size 27 x 37 x 25 x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire. (iii) for Lafarge Board Gypsum ceiling; metal comprising of \"LaGyp\" universal channel (web 45 mm and flange 27mm base metal thickness (BMT) 0.55 mm and length 3660 mm to be used as main channel as well as ceiling channel complete.\"LaGyp\" connecting clips, perimeter channel ( Size of web 28 mm, flange 18/30 mm and length 3660 mm, MBT 0.55 mm) and \"L\" angle (Lenght 3050 mm BMT 0.55 mm) with finally the board are to be Jinded and finished so as to have a flush look with which includes filling and finishing the tepered and square edges of the board with \"LaGyp\" easy joint Gypsum based jointing compound, \"LaGyp\" paper tape.The rate should include providing and laying two or more coats of oil bound distemper to give a neat and even finish including preparing the base with primor and scaffolding etc. |
| 15 | Providing & fixing false ceiling with fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tiles at all height with GRG (Glass fibre reinforced gypsum) false ceiling tiles with fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tile595mmx595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4) - 1970 and light reflctance of 85% minimum to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120grams per Sqm incl both sides) comprising of main T-runners of size 15x32mm of length 1200mm, and secondry intermediate cross T- of size 15x32mm of length 600mm to from grid moudle of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @80 grams per sqm) ie 50mm long, 8mm outer diameter M*6 dash fasteners, 6mm dia fully threated hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. the work shall be carried out per specification, drawing and as per directions of Engineer-in-Charge. |
| 16 | Supply and fixing bib cock long neck with flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 17 | Supply and fixing in repairs Stop/Angle valves 15mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 18 | Supply and fixing 15mm bore pillar tap long neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"hot\" or \"cold\" with long screwed shanks and fly nuts, screwed for iron pipe,fixed as in repair complete all as specified and directed. |
| 19 | Supply and fixing chromium platedshower rose with or without swivel joints 150mm dia including fixing to steel pipe, fixed as in repairs complete all as specified and directed. |
| 20 | Supply and fixing brass CP mixer (WHB, Bathroom & Kitchen mixer) , for hot & Cold water and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs, complete all as specified and directed. |
| 21 | Supply and fixingin repairsbrass chromium plated tubular towel rail 20mm dia \"D\" type 60 cm long between flanges complete all as specified |
| 22 | Supply and fixing CP Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) and fixed in position as in repairs complete all as respect as specified |
| 23 | Supply and fixing 15mm dia PVC connection with PTMT nut,of length 450mm, fixed as in repairs complete all as specified and directed. |
| 24 | Supply and fixing 15mm dia PVC connection with PTMT nut,of length 750mm, fixed as in repairs complete all as specified and directed. |
| 25 | Supply and fixing in repair, 600x450 mm bevelled edge mirror of selected glass mounted on 6mm thick AC buildingboard or commercial plywood and fixed to wooden on plugs with chromium plated brass screws and cup wasgers complete all as specified. |
| 26 | Supply and fixing Viterious china toilet paper holder colour, in repair, complete all as specified and as directed |
| 27 | Supply and fixing in repair, Grating square 125 mm size (openable) with waste hole of PTMT (Minimum weight 100gms) |
| 28 | Supply and fixing in repair, Grating square 150 mm size (openable) of PTMT (Minimum weight 100gms) |
| 29 | Supply and fixing in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc, set with concrete and making good to floor including taking down existing complete all as specified & directed. |
| 30 | Supply and fixing in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 15mm bore iron pipe. |
| 31 | Supply and fixing in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 20mm bore iron pipe |
| 32 | Supply and fixing in repair, mild steel chromium plated Health faucet (ABS Body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 33 | Supply and fixing Vitreous china squatting pan, \"Orissa pattern\" of size 580 x 440 mm white with integral foot rests,including cast iron P or S trap with provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan, flushing cistern, flush pipe, PVC connection for water supply to flushing cistern etc complete fixed in repair. |
| 34 | Supply and fixing in repairs, combined of viterous china wash down water closet pan (pedestal patten) white with flushing cistern , brackets and flushing pipe, seat cover, completeand making all necessary connection to make the system fully functional, complete all as specified and as directed . |
| 35 | Supply and fixingwash hand basin, vitreous china, white, decorative type, flat or angleback, size 550mm x 400mm incliding cutting for and pinning in ends of brackets orerecting stand, incl CP waste coupling but exclusive of pillar tap andwaste pipe, fixed as in repairs complete all as specified. |
| 36 | Supply and fixing Urinal spreader any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) as in fixed in repair |
| 37 | Supply and fixing in repair Vitreous China urinals, Half stall type (back or corner wall type) of size 420x395x635mm ofwhite with incl CP brass coupling, PVC flexible discharge pipe including chromium plated water spreader, connection pipe and discharge down pipe, complete all as directed |
| 38 | Supply and fixing Vitreous china urinal partition white of size 310x700 mm slabs terminating about 40cm above floor line complate. |
| 39 | Material and labour for sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915mm x 460mm, bowl size 410mm x 330mm x160mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repairs complete all as specified and directed. |
| 40 | Supply and fixing in repair, rectangular sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs, complete all as specified and directed by Engr-In- Charge. |
| 41 | Supply and fixing Fancy type elegant corner glass shelf of radius 300 mm with 300x600 mm size including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs, complete all as specified and directed. |
| 42 | Supply and fixing 15mm bore tubes \"medium grade\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors and taking down old, complete all as specified & directed. |
| 43 | Supply and fixing 20mm bore tubes \"medium grade\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors and taking down old, complete all as spd & directed. |
| 44 | Dismantling of water tanks exc 250 ltrs capacity but not exc 500 ltr capicity and removal at site |
| 45 | Supply and fixing Rotational moulded PVC, Triple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple(inlet & outlet) etc. but excluding connection of ball valve, over drain pipecomplete all as specified and directed. |
| 46 | Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site |
| 47 | Supply and fixing Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with inlet & outlet connections with 15/20mm ball valve & including all fittings such as GI tank nipple 150 mm long with washer & plug etc, complete all as specified and directed. |
| 48 | Material and labour for cleaning existing RCC/PVC Tank of capacity exc 250 ltrs but n.exc 500 Ltr by mentioned process all as directed by Engr-in-charge. |
| 49 | Same as item No 46.00 above, but capacity exc 500 ltrs but n.exc 1000 Ltr all as directed by Engr-in-charge. |
| 50 | Note: For above itemsNo. 46.00 & 47.00 Tank cleaning process includes (a) Dewatering & Removing all settled silt, scale & Dust from inside of tanks using brush manually and applying bleaching power, allowed to rest for 1 hour. (b) Cleaning and rinsing the tank using fresh water to wash out complete and allowed to dry for 30 min. (c) Writting detals of 7 cm height using synthetic enamel paint(white/black colur) to mention date of cleaning including rubbing out old letters written over the tank, complete as specified. |
| 51 | Demolition of cement concrete in ground floors and pavings n exc 15cm thick ( below or above GL) complete all as specified anddirected. |
| 52 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed. |
| 53 | Material and labour for joint free Non Skid glazed ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) and incl dismantling old floor tiles with bed, complete all as specified and directed by Engr-In- Charge. |
| 54 | Material and labour for joint free glazed ceramic coloured tiles 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4 and incl dismantling old wall tiles with bed,complete all as specified and directed by Engr-In- Charge. |
| 55 | Material and labour Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished ceramic tiles (coloured/dark shade /double charged/ultrachaged) area of each tile exc. 0.42 sqm but n. exc. 1 sqm as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:6) and incl dismantling old floor tiles with bed, complete all as spd & as directed.NOTE:- Clour and shade shall be finalized by the GE and Users. |
| 56 | All the same as perhere-in-above but vitrified tiles of size on vertical surfaces such as skirting and incl. rendering 15mm thick in C.M 1:3 and incl dismantling old floor tiles in vertical surface with bed, complete all as specified & directed |
| 57 | Material & Labour brick work with sub class \"B\" bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 and incl demolition of old brick work, complete all as specified & directed. |
| 58 | Same as item No 55.00 above but except bricks all as specified. |
| 59 | Material and labour for Rendering 15mm thick on fair faces of newly brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement, complete all as specified and directed by Engr-In- Charge. |
| 60 | Material and labour for Rendering 15mm thick on fair faces of old brick work or concrete surfaces at any height incl walls, cornices, chajjas, sun shadesetc. in CM 1:4 finished even and smooth without using extra cement and with or without water proofing compound (2% 0f cement content) (External surface) incl necessary using scafolding or shuttering and taking down old plaster, complete all as specified and directed by Engr-In- Charge. Note: If WPC used, then it will paid separately. |
| 61 | Supply only Integral waterproofing compoundall as specified as per manufacture instruction complete all as specified and directed by Engr-In- Charge. |
| 62 | Material and labour for untreated surfaces by applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 63 | Material and labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement(Internal surfaces) and taking down old plaster, complete all as specified and directed by Engr-In- Charge. |
| 64 | Material and labour forfor applying3 mm thick (achieved in two coats) wall careputty of new undecorated plastered surfaces of wallcomplete all as specified and directed |
| 65 | Material and labour for Rendering 5mm thick on ceiling surface in CM 1:3 finished even and smooth and taking down old plaster, complete all as specified and directed by Engr-In- Charge. |
| 66 | Material and labour preparatin of new / previously untreated surface walls & ceiling by applying two coats of oil bound distemper (OBD) on wall surfaces over a coat of primer complete all as specified and directed by Engr-In- Charge. |
| 67 | Supply and fixing in repair, soap dish size 160x160x90mm, fixed to plugs with chromium plated brass screws complete. |
| 68 | Material and labour for complete removal of existing treatment from internal surfaces on walls by wire brushes, sand paper and iron patti / flat & stopping of surfaces & leveling/ edging the disturbed places/edges and applyingcompound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper and applying two coats of oil bound distemper over a coat of alkali-resistant primer, complete all as specified and directed by the Engineer-in-Charge. |
| 69 | Material and labour for preparation of old painted wood/steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed. |
| 70 | Material and labour for preparation of plastered or unplastered old decorated surfaces over 10 cm girth or width with sand papering of walls incl cornices etc. incl washing, rubbing down and stopingthe connected previously treated surfaces and applying one coat of plastic acrylic emulsion exterior/interior quality (Apex painting) (tint as approved by GE) complete all as specified. |
| 71 | Supply and fixing in repairs curtain rails anodised aluminium alloy with fixing brackets etc complete all as specified |
| 72 | Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete. |
| 73 | M & L for point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including cutting chiseling and grouting concealed (Any type Wall) PVC conduit pipe, tee, elbow and bend etc.andwith all connecting accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thicklaminated sheet top cover or cover plate and metal box fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :- |
| 74 | (a) One light/Fan point controlled by one 5 Amps switch one way |
| 75 | (b) One light point controlled by two way switch one way |
| 76 | (c) One bell point controlled by one switch |
| 77 | (d) One 3 pin socket point 5 Amp on independent board |
| 78 | (e) One 3 pin socket point 5 Amp on same board with other switches. |
| 79 | All as per item No. 71.00 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 80 | All as per item No.71.00 above but with 4 sqmm ( Nominal area ) cable with 4 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 81 | M & L for point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in PVC conduit pipe, tee, elbow and bend etc. and all connecting accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thicklaminated sheet top cover or cover plate and metal box fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :- |
| 82 | (a) One light/Fan point controlled by one 5 Amps switch one way |
| 83 | (b) One bell point controlled by one 5 Amps switch one way |
| 84 | (c) One light point controlled by two way switch one way |
| 85 | (d) One 3 pin socket point 5 Amp on independent board |
| 86 | (e) One 3 pin socket point 5 Amp on same board with other switches. |
| 87 | All as per item No.74.00 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 88 | All as per item No.74.00 above but with 4 sqmm ( Nominal area ) cable with 4 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 89 | Supply and fix Switch piano, flush button single pole, 6 Amps one way. |
| 90 | Supply and fix for modular switch, 10 Amp, one way complete |
| 91 | Supply and fix Switch piano, flush button single pole, 16 Amps one way. |
| 92 | Supply and fix for modular switch, 16 Amp, one way complete |
| 93 | Material and labour switch piano,flush type, single pole 2 way 6 Amp,ISI marked |
| 94 | Supply and fix bell push, flush button single pole, 6 Amps one way. |
| 95 | Supply and fix for modular bell push, 6 Amp, one way. complete |
| 96 | Supply and fix Sokcet outlet, 2 in 1, flush type 6 Amp 2/3 pin muliti purpose |
| 97 | Supply and fix modular socket 06 Amp 2/3 pin combined 2 module complete |
| 98 | Supply and fix Socket outlet, 2 in 1, flush type 6/16 Amps 3/3 pin universal multipurpose |
| 99 | Supply and fix modular socket 6/16 Amp 2/3 pin combined 2 module complete |
| 100 | Supply and fix Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan. |
| 101 | Supply and fix modular Fan step regulator suitable for BLDC fan, 120W - 2 module complete |
| 102 | Supply and fix in repair Door bell electronic, music type,230 volt AC. |
| 103 | Supply and fix Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVCblocks. |
| 104 | Supply and fixing in repair Lamp holder,PVCinsulated body, with back plate suitablefor batten fitting |
| 105 | Supply and fixing in repair LED bulb 09 watt. |
| 106 | Supply and fixing in repair Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED lamp B22 base complete all as specified and directed. |
| 107 | Supply and fixing in replacement Inverter LED batten 20 watt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours. |
| 108 | Supply and fixing in replacement LED tube light fitting of20 watts 6000K , 230 volt, withBasic all purpose surface and wall mounted LED batten with aluminum housing & integrated electronic driver complete with all fixing accessories and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. |
| 109 | Supply and fixing in replacement LED tube light fitting of10 watts 6000K , 230 volt, with Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete with all fixing accessories and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. |
| 110 | Supply and fix in repair 36 watt LED Light 2\" x 2\" LED luminare with Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. |
| 111 | Supply and fix in repair 15 watt LED Light Aesthetically designed 1x1 LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination. with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. |
| 112 | Supply and fixing in repair bldg security light light fittings 1x 25 Watt LED street light with New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable sizeall as specified and directed. |
| 113 | Supply and fixing in repair security light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size32mm X 5 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed. |
| 114 | Supply and fixing in repair Bulkhead luminaire Decorative Energy saving new generation 10W LED IP65 with opal diffuser incl electronics driver & connection with copper flexible cable 3 core complete all as specified and directed. |
| 115 | Supply and fix in replacement Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. |
| 116 | Supply and fix in replacement Sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. |
| 117 | Single pole and Neutral Sheet metal enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 20 Amps. |
| 118 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board TPN, 415 volts, 4 way horizontal type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified. |
| 119 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board SPN, 240 volts, 4 way horizontal type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified. |
| 120 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board SPN, 240 volts, 8 way horizontal type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified. |
| 121 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board SPN, 240 volts, 12 way horizontal type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified. |
| 122 | Supply and fix in repair MCB single pole 6 to 32 Amps 240 volts, C series, 10 kA rupturing capacity |
| 123 | fixing only serviceable MCB SP/SPN/TPN any capacity |
| 124 | Supply and fix in repair MCB single pole & neutral 32 Amps 240 volts, C series,10 kA rupturing capacity |
| 125 | Supply and fix in repair MCB single pole & neutral 40-63 Amps 240 volts, C series,10 kA rupturing capacity |
| 126 | Supply and fix in repair MCB Tripple pole & neutral 40 to 63 Amps 240 volts, C series,10 kA rupturing capacity |
| 127 | Material and labour, Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thickburied directly in ground (earth pit depth not less than 2.25m deep below the ground level) with top edge of earth plate at a depth not less than 1.5m below ground level connected to earth using GI earth wire of 4mm dia by means ofof nuts, bolts and washer and check nuts of GI or steel as shown in electrical plate No.3 of MES SSR-2009 (Part-I) and connected to earth test point all as specified or indicated including testing on completion with and including 15mm bore light grade GI protection pipe 7.5 metre long for earth including PCC (1:2:4) pit with RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 6mm dia MS bars @ 100mm both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with 20mm dia light grade pipe, funnel, wire mesh, common salt chorcoal, necessary excavation and earth work in any type of soil complete all as specified. |
| 128 | Supply and fix in repair Switch piano, flush button single pole, 6 Amps one way. |
| 129 | Supply and fix in repair Switch piano, flush button single pole, 16 Amps one way. |
| 130 | Supply and fix in repair bell push, flush button single pole, 6 Amps one way. |
| 131 | Supply and fix in repair Sokcet outlet, 2 in 1, flush type 6 Amp 2/3 pin muliti purpose |
| 132 | Supply and fix in repair Socket outlet, 2 in 1, flush type 6/16 Amps 3/3 pin universal multipurpose |
| 133 | Supply and fix in repair fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan. |
| 134 | Supply and fix in repairs modular switch 1 way 10A,1 as per existing make at site |
| 135 | Supply and fix in repairs modular switch 1 way 20A,1 module as per existing make at site |
| 136 | Supply and fix in repairs socket, 10A-2/3 pin combined 2 modules as per existing make at site |
| 137 | Supply and fix in repairs socket, 16A-2/3 pin combined 2 modules as per existing make at site |
| 138 | Supply and fix in repairs moduler fan Requlator, 120 W-2 modules as per existing make at site |
| 139 | Amount of credit of Rs. 169425.50 for retrived old material as mentioned in Schedule \"A\" section-II of tender document in pdf form, will be deducted offline while acceptence of tender. |
