Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | RENOVATION OF SEA HAWK |
| 2 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved |
| 3 | Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 6 | Random rubble masonry with hard stone in foundation and plinth using existing rubble available at site including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 8 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level |
| 9 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level |
| 10 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 11 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more |
| 12 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 13 | Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 14 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in superstructure above plinth level up to floor V level in all shapes and sizes in: cement mortar 1:6 (1 cement : 6 coarse sand) |
| 17 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 18 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 19 | Providing and fixing 10x10x7.5 cm cobble stone(box cut) pink or grey in colour hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10 mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer in-charge |
| 20 | Design built ,supply and fixing of Membrane Tensile Roof , Fabric Brand Serge FERRARI advanced 902 S2 or equivalent ,Fabric weight 950g/m2,tensile strength 420 daN/5 cm,Tear strength 55/50daN with15 year warranty over Space frame using suitable M.S Pipes and sections for structure work for Roof including the fabrication cost of space frame Truss and installation of Roof membrane etc complete. primer 1 coat and MRF Epoxy paint two coated Manual for structure work (pipe)fabric fixing- aluminium top session profile and flat, self-drilling screw,fabric laying,cutting,welding,Tools & Equipments, Errection,all other accessories etc., Including Labour for scaffolding etc complete |
| 21 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 23 | PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete |
| 24 | Providing and fixing hand rail of approved size using 50x25x2.6 mm GI tubular section for top rail and 12mm dia M.S rod for vertical members fixed with 25x3 mm M.S flat by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer & fixed in P.C.C (1:2:4) block including all cost etc complete |
| 25 | Fabricating and fixing metal sheet installations of varying size as per design using 2mm thick (14gauge) S.S sheet mat finish of required size for vertical base material fixed with M.S angles at sides , mounted on C.C base including cost of fabrication etc complete |
| 26 | NATURE PLAY |
| 27 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 29 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 30 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 31 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 32 | Supplying and filling in basement around Tree with river sand in sand pit for children\"s play including watering, ramming consolidating and dressing complete. |
| 33 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 34 | Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
| 35 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level |
| 36 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 37 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level |
| 38 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more |
| 39 | Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 ( 1 cement : 6 coarse sand)Above plinth level below floor 2 level |
| 40 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) |
| 41 | Water proof plastering with Cement Mortar 1:4 (1 cement : 4 fine sand) 12mm thick plaster finished with a floating coat of neat cement mixed with water proofing compound of approved make @ 2kg/m2 of mix floated hard and troweled smooth including all labour, material, conveyance charges etc complete. |
| 42 | Pointing on brick work or brick flooring with cement mortar 1:3 ( 1 cement : 3 fine sand):Raised and cut pointing |
| 43 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes |
| 44 | Providing and fixing 10x10x7.5 cm cobble stone(box cut) grey or pink in colour hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10 mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer in-charge |
| 45 | Providing and laying Mylaudy cut stone slab 4mm thick (Flamed finish) 30cm width at top of Retaining wall in required design and patterns using stone slab , all complete asper the architectural drawings with laid over c.m 1:4 and pointing including curing etc. all complete as specified and as directed by the Engineer-in Charge |
| 46 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 47 | Supplying laying of bi-axial extruded high modulus polypropylene geogrid coforming to MORTH SPECIFICATION for base/sub-base reinforcement having minimum tensile strength 20kN/m in the longitudinal and transverse direction, with 7kN/m and 14kN/m tensile strength at 2% and 5% strain respectively in the longitudinal and transverse direction, junction efficiency not less than 95% and with 38mm X 38mm mesh opening. |
| 48 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade |
| 49 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 50 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 51 | PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete. |
| 52 | Supplying and installation of Playing equipment WOODEN STEPPING SLICE as per design of size 90cm length, 240cm width and 180 cm height using 10mm square GI pipe for frame work,Rel wood 8mm thick forcladding ,HDPE sheet for setaing top and 16mm dia reinforced bars for ropes including all cost etc complete |
| 53 | Supplying and installation of Playing equipment WEB CLIMBER as per design of size 240cm length,90cm width and 150 cm height using 100mm GI pipe for frame work and finshing with Rel wood 8mm thick for cladding and 16mm dia reinforced bars for ropes including all cost painting ,Cost of civil work for fixing etc complete. |
| 54 | Supplying and installation of Playing equipment WOODEN SLOPE WITH CLIMBING as per design of size 180cm width and 214 cm height using Epay wood 8mm thick for platform ,16mm dia reinforced bars for ropes including all cost painting ,Cost of civil work for fixing etc complete. |
| 55 | Supplying and installation of Playing equipment WEB SWING as per design of size 150cm length,200cm width and 200 cm height using 80mm GI square pipe for frame work and finshing with Rel wood 8mm thick for cladding ,Round 100cm dia steel swing of including all cost painting ,Cost of civil work for fixing etc complete |
| 56 | Supplying and installation of Playing equipment HANG AND GO as per design of size 240cm length,90cm width and 150 cm height using 100mm GI square pipe for frame work ,25mm SquareG.I pipe 75cm length at top for hanging and finshing with Rel wood 8mm thick for cladding , Epay wood 16mm thick for platform including all cost painting ,Cost of civil work for fixing etc complete. |
| 57 | Supplying and installation of Playing equipment ROPE BRIDGE as per design of size 100cm length,440cm width and 240 cm height using 100mm GI square pipe for frame work and finshing with Rel wood 8mm thick for cladding ,Epay wood 16mm thick for platform and 16mm dia reinforced bars for ropes including all cost painting ,Cost of civil work for fixing etc complete. |
| 58 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 59 | Supplying and installation of Playing equipment WOOD AND ROPE BRIDGE as per design of size 90cm length,580cm width and 240 cm height using 100mm GI pipe for frame work and finshing with Rel wood 8mm thick for cladding,Epay wood16mm thick for platform and 16mm dia reinforced bars for ropes including all cost painting ,Cost of civil work for fixing etc complete |
| 60 | WATER PLAY |
| 61 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil |
| 62 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 63 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 64 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level |
| 65 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level |
| 66 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 67 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more |
| 68 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 69 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 70 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) |
| 71 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate |
| 72 | Providing and laying 36mm EPDM flooring with colour pattern using 6mm virgin high polymer imported colored EPDM granules layer bonded with PU binder with appropriate ratio over a cushion layer of 30mm R grade rubber buffing bonded with dow PU binder laid over existing rough plastered concrete surface .Rate Including cost of PU Binder/Glue etc as required for the works,labour charges etc complete. |
| 73 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 74 | Supply Conveyance Installation testing and Commissioning of sixteen numbers flush mountable type Dry Deck Fountain with S.S Nozzle Water nozzle 3/8 size(16nos make Murjani or equivalent ),ABS Floor drain cover 6\"\" size(16nos Aquq make),Under water RGB light 24W(10nos Make Akash mumbai),Auto valve Controller( 4nos Make Rain bird),PVC pipes ,& fittings (Supreme make),Multi port valve 6 way, Quartziferous sandSAND -Silexmedia.0.75HP pump(Make Baico),step down transformer(Make Akash),suitable valve(Make Supreme) as per specification etc complete |
| 75 | KNOWLEDGE VAULT / CAFETERIA/SIDE RETAINING WALL |
| 76 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil |
| 77 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 78 | Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar |
| 79 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar |
| 80 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 81 | Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil |
| 82 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 83 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 84 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 85 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 86 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level |
| 87 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 88 | Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
| 89 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level |
| 90 | Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 91 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 92 | Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 93 | Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges |
| 94 | Centering and shuttering including strutting, etc. and removal of form for:Arches, domes, vaults up to 6m span |
| 95 | Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) |
| 96 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 97 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more |
| 98 | Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 ( 1 cement : 6 coarse sand)Above plinth level below floor 2 level |
| 99 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in superstructure above plinth level up to floor V level in all shapes and sizes in: cement mortar 1:6 (1 cement : 6 coarse sand) |
| 100 | Tile Brick masonry work 5 cm thick with common burnt clay F.P.S. ( non modular) tile bricks of class designation 10 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth and upto floor five level. |
| 101 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood |
| 102 | Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood |
| 103 | Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood |
| 104 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:150x10 mm |
| 105 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:125 mm |
| 106 | Providing and fixing bright finished door latch with necessary screws etc. complete:300x16x5 mm |
| 107 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 108 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover |
| 109 | Providing and fixing ball bearing for rolling shutters. |
| 110 | Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer -in-Charges, (area of grill to be measured). |
| 111 | Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc |
| 112 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 113 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 114 | Providing and fixing glazing in aluminium door using 4mm thick fluted glass. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. |
| 115 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness |
| 116 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides |
| 117 | Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) :6 mm thick Cement bonded wood particle board as per IS:14276 |
| 118 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm |
| 119 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper |
| 120 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar |
| 121 | Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete |
| 122 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 123 | Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc.to the side hung windows as per direction of Engineer - in-Charge complete.355 x 19 mm |
| 124 | Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:250x10 mm |
| 125 | Providing and fixing glazing 12mm toughened Glass in fixed window. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in charge . (Cost of aluminium snap beading shall be paid in basic item) |
| 126 | Supplying and fixing Precast Terracotta Jali of size 20cmx20cm with neat pointing in c.m 1:4 including all cost etc complete |
| 127 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured) |
| 128 | 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete |
| 129 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) |
| 130 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1:3 ( 1 Cement : 3 fine sand) |
| 131 | Water proof plastering with Cement Mortar 1:4 (1 cement : 4 fine sand) 12mm thick plaster finished with a floating coat of neat cement mixed with water proofing compound of approved make @ 2kg/m2 of mix floated hard and troweled smooth including all labour, material, conveyance charges etc complete. |
| 132 | PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete. |
| 133 | Pointing on brick work or brick flooring with cement mortar 1:3 ( 1 cement : 3 fine sand):Raised and cut pointing |
| 134 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. |
| 135 | Providing and laying Natural finish Tandur stone tile flooring(size 58.4x58.4 cm)40mm thick in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with tiles over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid , jointed with cement slurry grouting and Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade |
| 136 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 137 | Providing and laying Mylaudy cut stone slab (Flamed finish) at top of seating area in required design and patterns using stone slab of size 30x30 x4cm , all complete asper the architectural drawings with laid over 150 mm thick compacted gravel bed of stone aggregate of 10mm to 12.5mm size , filling the joints with fine sand and jointed with cement slurry including curing etc. all complete as specified and as directed by the Engineer-in Charge. |
| 138 | Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work |
| 139 | Providing and fixing hand rail of approved size using 50x25x2.6 mm GI tubular section for top rail and 12mm dia M.S rod for vertical members fixed with 25x3 mm M.S flat by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer & fixed in P.C.C (1:2:4) block including all cost etc complete |
| 140 | Supplying , fabrication and fixing of Steel stair inside of Knowledge vault using 2\"\"x1\"\" size Galvanized pipe section for main and tread , 1\"\"x1\"\" GP section of inside members and steps & Handrail covered both sides with 3mm perforated sheet by welding for stair case including all cost ,cost for welding etc complete as per the drawing and approval of engineer in charge |
| 141 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 |
| 142 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:Fully Perforated Gypusm Plaster Board of size 1200 x 2400 x 12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer - in charge and as per manufacturer\"s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. |
| 143 | Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the \"W\" profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeterchannel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish. Fully Perforated Gypusm Plaster Board of size 1200 x 2400 x 12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer - in- charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.6 |
| 144 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 145 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 146 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 147 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 148 | FURNITURE IN KNOWLEDGE VAULT BUILDING |
| 149 | Supplying and providing chairs made of wooden legs and Fabric upholstery body(Size 52x56x76cm) as per the approval of Engineer in charge including all cost and labour charges etc complete |
| 150 | Supplying and providing Kids Chair made of Polypropylene having size top 32x28cm,x53cm height, bottom size 48x45cm ,with high enough for the dining table, and with comfy support for the feet as per the approval of engineer in charge etc complete. |
| 151 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 152 | supplying and fixing 12mm marine plywood with 1mm laminate both sides fixed to existing steel frame work as per design and drawing including material and cost for fiixng etc complete. |
| 153 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 154 | NATURE WALK |
| 155 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 156 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 157 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 158 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level |
| 159 | Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
| 160 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 161 | Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 162 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 163 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level |
| 164 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more |
| 165 | Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 166 | Supplying and fixing WPC deck wood flooring( wood plastic composite) for elevated walk way flooring using 23mm thickness planks with necessary side clips for holding and cover the edges and screw including labour for fixing etc complete |
| 167 | PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete. |
| 168 | Providing and fixing hand rail of approved size using 50x25x2.6 mm GI tubular section for top rail and 12mm dia M.S rod for vertical members fixed with 25x3 mm M.S flat by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer & fixed in P.C.C (1:2:4) block including all cost etc complete |
| 169 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) |
| 170 | Water proof plastering with Cement Mortar 1:4 (1 cement : 4 fine sand) 12mm thick plaster finished with a floating coat of neat cement mixed with water proofing compound of approved make @ 2kg/m2 of mix floated hard and troweled smooth including all labour, material, conveyance charges etc complete. |
| 171 | Providing and laying Mylaudy cut stone slab (Flamed finish) 30cm width at top of Retaining wall in required design and patterns using stone slab of size 120cm,x60cm x4cm , all complete asper the architectural drawings with laid over 150 mm thick compacted gravel bed of stone aggregate of 10mm to 12.5mm size , filling the joints with fine sand and jointed with cement slurry including curing etc. all complete as specified and as directed by the Engineer-in Charge. |
| 172 | Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work |
| 173 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 174 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 175 | PARKING GRID,ENTRY TO SCHOOL,TICKET COUNTER & SITE DEVELOPMENTT |
| 176 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil |
| 177 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 178 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size |
| 179 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 180 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 181 | Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 ( 1 cement : 6 coarse sand)Above plinth level below floor 2 level |
| 182 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in superstructure above plinth level up to floor V level in all shapes and sizes in: cement mortar 1:6 (1 cement : 6 coarse sand) |
| 183 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 184 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 185 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides |
| 186 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness |
| 187 | Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:250x10 mm |
| 188 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in Charge.With stainless steel cover plate minimum 1.25 mm thickness |
| 189 | Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). |
| 190 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600Upto 5 mm depth and 5 mm width |
| 191 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level |
| 192 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. All work above plinth level upto floor V level |
| 193 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars |
| 194 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more |
| 195 | Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 196 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 197 | Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 198 | Providing and fixing precoated Galvanised PUF sandwich panel roof sheets (size, shape, and pitch of corrugation as approved by Engineer -in- Charge) 30 mm thick panels with U- Factor (0.24 to0.28) and R Value (3.95-3.41) satisfying the specification of ECBC Code( Energy Conservation Building Code) prescribed by Government of India. The total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 12metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the directions of E-in-C ( Rate will be paid per square metre on superficial area ) |
| 199 | Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) :6 mm thick cement board |
| 200 | Providing and fixing hand rail of approved size using 50x25x2.6 mm GI tubular section for top rail and 12mm dia M.S rod for vertical members fixed with 25x3 mm M.S flat by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer & fixed in P.C.C (1:2:4) block including all cost etc complete |
| 201 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) |
| 202 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1:3 ( 1 Cement : 3 fine sand) |
| 203 | Pointing on brick work or brick flooring with cement mortar 1:3 ( 1 cement : 3 fine sand):Raised and cut pointing |
| 204 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate |
| 205 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 206 | Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work |
| 207 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 208 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 209 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 210 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 211 | Painting colour pattern as per drawing on road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint water based of different colour shades ,superior quality ,low VOC - eco friendly ,fast drying, fungal resistance conforming to IS: 164, onbituminous surface make as approved by the Engineer-in-Charge, i/c cleaning the surface of all dirt, scales,oil grease and other foreign material etc. and lining out complete. |
| 212 | Finishing the front side of existing compound wall with art design paint as per drawing using Acrylic Smooth exterior paint of required shade, Two or more coat including applying additional coats wherever required applied over and including priming coat of exterior primer , to achieve ven shade and colour, cost for scaffolding, charges for artist ,etc complete |
| 213 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 214 | Providing and laying 10x10x7.5 cm size cobble stone pink or grey in colour (Box cut)pavers laid in required colour and pattern over and including 100 mm thick compacted gravel bed of stone aggregate of 10mm to12.5mm size , filling the joints with fine sand and pointing with c.m 1:4 etc. all complete as per the direction of Engineer-in-charge |
| 215 | Providing and laying 60 mm thick factory made cement concrete interlocking grass paver concrete block (porous)of M - 30 grade (Size 40cmx40cmx8cm or nearest size ) made by block making machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over 100mm thick compacted gravel bed of stone aggregate of 10mm to 12.5mm size , filling the joints with fine sand and jointed with cement slurry including curing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 216 | Providing and laying Mylaudy cut stone slab (Flamed finish) flooring in required design and patterns using stone slab of size 120cmx60cm x4cm , in parking yard all complete asper the architectural drawings with laid over 100 mm thick compacted gravel bed of stone aggregate of 10mm to 12.5mm size , filling the joints with fine sand and jointed with cement slurry including curing etc. all complete as specified and as directed by the Engineer-in Charge. |
| 217 | Supplying,fabrication and fixing Gate of required size using 40x40mm G.I tubular square section for Outerframe vertical,20x40mm for top & bottom and20x10mm cast iron rectangular rod for inside vertical memebers,including cost of fabrication ,providing necessary locking arrangement with hinges and clamp fixed in P.C.C (1:2:4) blocks of required size,applying a primer coat of approved steel primer inclding labour for fixing etc complete |
| 218 | Supplying and fixing Picket Gate as per design using 40mm dia GI pipe for outer frame and 20mm dia G.I pipe for inside members,one coat primer and fixing for labour charges including all cost etc complete |
| 219 | Supplying and fixing Display board near SEAHAWK as per design using 10mm thick brushed stainless steel plate for base material and fixing acrylic sheet with smoke finish (translucent) letters inscribed with led lighting from underneath to light the display board including all cost etc complete |
| 220 | Supplying and fixing cast iron handrail 1cm thick and 60cm height as per design including all cost and labour charghes etc complete |
| 221 | Supplying and fixing Front signage as per design using brushed finish stainless steel for base materisl ,letters with the text CNC cut and fixing acrylic covering behind the letter cutout .The signage fixed to steel frame work including all cost etc complete |
| 222 | Providing and construction of percolation pit of size 60cm dia and 90cm depth by erection of read made R.C.C ring of 30cm depth 3nos covered with precast r.c.c slab and inside filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 223 | Supplying and installing S.S Waste bin traingular in shape 60cm width x1.5m height as per specification including all cost etc complete |
| 224 | LANDSCAPE WORKS |
| 225 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 226 | Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. |
| 227 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 228 | Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 229 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm |
| 230 | Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded). |
| 231 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 90 cm dia, and 90 cm deep |
| 232 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 60 cm dia, and 60 cm deep |
| 233 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 45 cm dia, and 45 cm deep |
| 234 | Providing and stacking of Caesalpinia pulcherrima species of height 150 cm. in poly bags of 30cm as per direction of the officer-in-charge. |
| 235 | Supply and stacking of plant Hibiscus of height 100 cm. with 8-10 branches and healthy variegated foliage in cement pots of size 35 cm |
| 236 | Providing and stacking Hibiscus rosa Chembarathi of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm |
| 237 | Providing and stacking Ixora chinenesis (thetti )of height40 cm. in 25 cm size of poly bag & as per direction of the officer-in-charge |
| 238 | Providing and stacking Ixora singaporensis red (thetti )of height 40 cm. in 25 cm size of polybag & as per direction of the officer-in-charge |
| 239 | Providing and stacking Heliconia psittacorum Pink height 200 cm size of poly bag & as per direction of the officer-in-charge Rate per each |
| 240 | Providing and Stacking of Lemon grass of ht. 90 cm with multi branches in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 241 | Providing and Stacking of Hymenocallis littoralis(Spider lily) of 45 cm height with 10-12 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge |
| 242 | Providing and Stacking of Hymenocallis littoralis(Spider lily) of 35 cm height with 10-12 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge |
| 243 | Providing and Stacking of Crinum asiaticum(Crinum lily) of 100 cm height with 10 12 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 244 | Providing and Stacking of Crinum asiaticum(Crinum lily) of 60 cm height with 10 12 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 245 | Providing and Stacking of Crinum asiaticum(Crinum lily) of 45 cm height with 10 12 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 246 | Providing and stacking of Bauhinia acuminata of height 100 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 247 | Providing and stacking of Bauhinia acuminata of height 150 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 248 | Providing and stacking of coleus-aromaticus(panikoorkka) of height 40 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 249 | Providing and stacking of zephyranthes candida of height 15 cm. in polybags of size 20 cm as per direction of the officer-in-charge. |
| 250 | Providing and stacking of Wedelia trilobata, full of leaves in 30 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 251 | Providing and stacking of Asplenium nidus(Birds nest fern ) of 80cm in size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 252 | Providing and stacking of Boston fern of in 30cm dia area (appr36nos / sqm) of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 253 | Providing and stacking of Ophiopogon grass of 20cm in size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 254 | Providing and stacking of pearl grass (Hemianthus micranthemoides) of turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming the surface smoothen and light waterning with sprinkler as per direction of officer-in-charge. |
| 255 | Providing and stacking of Senna auriculata having height 60 cm. in 25 cm size of polybag & as per direction of the officer-in-charge |
| 256 | Providing and stacking Rauwolfia serpentina of height 60 cm. in 25 cm size of polybag & as per direction of the officer-in-charge |
| 257 | Providing and stacking of Indigofera tinctoria tinctoria height 60 cm. in 25 cm size of polybag & as per direction of the officer-in-charge |
| 258 | Providing and stacking of Alpinia galanga having height 80 cm. in 25 cm size of polybag & as per direction of the officer-in-charge |
| 259 | Providing and stacking of pachystachys lutea having height 40 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 260 | Providing and stacking ofgardenia gummifera having height 60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 261 | Providing and Stacking of Plumeria Alba having height of 120cm with 10-12 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 262 | Providing and Stacking of Plumeria Alba having height of 100cm with 10-12 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 263 | Providing and Stacking of Plumeria Alba having height of 180cm with 10-12 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 264 | Providing and Stacking of Tarlmounia elliptica. having height of 150cm with 10-12 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 265 | PLUMBING & SANITARY WORKS |
| 266 | Providing and fixing white vitreous china pedestal type water closet single unit (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid as approved by the engineer in charge. Make premium quality CERA / Hindware/Kohler or Equivalent |
| 267 | Supplying and fixing white glazed European water closet, wash basin510x400 mm,one hinged hand rails, two grab bars and all associated accessories like flushing cistern, seat and cover, CP brass angle valve, CP brass pillar tap with spatula lever, waste coupling etc. to make the toilet functional for special need persons including cutting and making good the walls and floor, etc. complete. Make - Cera cruse set or equivalent |
| 268 | Supplying and fixing Table top wash basin (Size 580x380x110mm) or nearest size wash hand basin including supplying and fixing waste coupling, pillar tap (Heavy, best quality) 1 no., 32mm PVC waste pipe and 15mm heavy duty PVC connection 1 no 15mm CP Brass angle valve including cutting and making good the walls etc. complete. - Make -Premium quality CERA /Hindware/Kohler or equivalent |
| 269 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board610x510 mm bowl depth 200 mm |
| 270 | Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length15 mm nominal bore |
| 271 | Flexible pipe 40 mm dia |
| 272 | Flexible pipe32 mm dia |
| 273 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms |
| 274 | Providing and fixing C.P. brass angle valve with flexible connection - 15mm nominal bore Make - Cera F8040201 or equivalent |
| 275 | Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm |
| 276 | Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in charge. |
| 277 | Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore |
| 278 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 279 | Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 280 | Providing and fixing sink cock cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 281 | Providing and fixing nozzle garden bib tap of approved quality conforming to IS standards |
| 282 | Supplying and providing C.I grating 100mm grating for planter drain |
| 283 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes |
| 284 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes |
| 285 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes |
| 286 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes |
| 287 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes |
| 288 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes |
| 289 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes |
| 290 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore |
| 291 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore |
| 292 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore |
| 293 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore |
| 294 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore |
| 295 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in-Charge. External work20 mm nominal outer dia pipes |
| 296 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in-Charge. External work25 mm nominal outer dia pipes |
| 297 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in-Charge. External work32 mm nominal outer dia pipes |
| 298 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in-Charge. External work40 mm nominal outer dia pipes |
| 299 | Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5 |
| 300 | Constructing masonry chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 ( 1 cement : 4 coarse sand) for water meter complete with C.I double flap surface box 400x200x200 mm ( inside ) with locking arrangement and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 grades stone aggregate 20 nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5 |
| 301 | Supplying and providing 100mm PVC multi floor trap including all cost etc. complete. |
| 302 | Providing and fixing S.S grating 100mm size of approved quality |
| 303 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 |
| 304 | Supply and fixing SWR Type B sanitary concealed pipes and specials , jointing with solvent cement and fixing them on slabs, floors etc. in position for connecting various fixtures (including fixing of pipes in sleeves/ drilled holes before water proofing) and specials with brick or CC supports wherever necessary including cutting and chasing brick walls as required, making good the same with brick in CM 1:6 and plastering with CM 1:4, 12mm thick one coat, sealing joints between pipe and concrete, complete : 75 mm diameter |
| 305 | Supply and fixing SWR Type B sanitary concealed pipes and specials , jointing with solvent cement and fixing them on slabs, floors etc. in position for connecting various fixtures (including fixing of pipes in sleeves/ drilled holes before water proofing) and specials with brick or CC supports wherever necessary including cutting and chasing brick walls as required, making good the same with brick in CM 1:6 and plastering with CM 1:4, 12mm thick one coat, sealing joints between pipe and concrete, complete : 110 mm diameter |
| 306 | Supply , jointing and fixing SWR type A exposed pipes and specials for Rain water with good quality solvent cement and teflon tape and fixing the same to line, plumb and level on the sides of ducts, walls, suspended to slabs as the case may be by using slotted rails , U clamps, 8mm threaded rods and other required materials including drilling holes, making good the walls, cleaning etc. and finishing complete:110 SWR type A For Rain water (exposed) |
| 307 | Supply , jointing and fixing SWR type A exposed pipes and specials for Rain water with good quality solvent cement and teflon tape and fixing the same to line, plumb and level on the sides of ducts, walls, suspended to slabs as the case may be by using slotted rails , U clamps, 8mm threaded rods and other required materials including drilling holes, making good the walls, cleaning etc. and finishing complete:75 SWR type A |
| 308 | Supply , jointing and fixing SWR type A exposed pipes and specials (For vent) with good quality solvent cement and teflon tape and fixing the same to line, plumb and level on the sides of ducts, walls, suspended to slabs as the case may be by using slotted rails , U clamps, 8mm threaded rods and other required materials including drilling holes,making good the walls, cleaning etc. and finishing complete: 75mm SWR Type A pipe (Exposed) for vent |
| 309 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall |
| 310 | Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia Vent cowl |
| 311 | Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P typeWith Sewer bricks conforming to IS: 4885 |
| 312 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 313 | Supply and Laying 110 diameter SN 8 sewage pipes conforming to IS15328, lowering into trenches, placing in position, aligning to line and levels and jointing with solvent cement including earth work excavation in all classes of soil, refilling the trenches and transporting excess soil as recommended by the site engineer, complete. (For sewer lines & rain water harvesting).110mm SN8 sewage pipe (Below ground - For sewage) |
| 314 | Supply and fixing SWR Type B sanitary concealed pipes and specials , jointing with solvent cement and fixing them on slabs, floors etc. in position for connecting various fixtures (including fixing of pipes in sleeves/ drilled holes before water proofing) and specials with brick or CC supports wherever necessary including cutting and chasing brick walls as required, making good the same with brick in CM 1:6 and plastering with CM 1:4, 12mm thick one coat, sealing joints between pipe and concrete, complete : 110mm SWR type B (Below ground - For RWH) |
| 315 | Supply , jointing and fixing SWR type B Sanitary exposed pipes and specials with good quality solvent cement and teflon tape and fixing the same to line, plumb and level on the sides of ducts, walls, suspended to slabs as the case may be by using slotted rails , U clamps, 8mm threaded rods and other required materials including drilling holes, making good the walls, cleaning etc. and finishing complete : 160mm SWR type B (Below ground - For RWH) |
| 316 | Constructing masonry chamber 45x45cm manhole with light duty cover & frame, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design |
| 317 | Extra for depth for manholes Size 45x45 cm With common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5 |
| 318 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 319 | Supplying and fixing of heavy duty slotted rail, full threaded rod, U bolts, universal clamps, nuts and washers for clamping pipes, floor traps etc.in ducts and below ceiling |
| 320 | Supplying and fixing 8mm anchor fastner for fixing threaded rod in position. |
| 321 | Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 4. 35 to 50 flush capacity |
| 322 | Making soak pit 1.2 m diameter 1.5 metre deep using precast well ring 1.2 m outer dia & 30cmdepth having with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 323 | Providing and fixing circular shape high density polyethylene water storage for under ground sump tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes and rate including fittings & fixtures for tank etc complete. Make Supreme/Sintex or equivalent |
| 324 | Supply, Erection, Testing and Commissioning of Open well submersible pump ( 1 HP for for Transfer water from well to irrigation OHT) set capable of lifting 50 lpm of water against a total head of 35m - with accessories such as 40mm gate valve-2 nos. 40mm non return valve-2 nos etc pump panel etc complete .(Make Kirloskar /V- Guard/Texmo or equivalent) |
| 325 | Supply, Erection, Testing and Commissioning of centrifugal monoblock pump set ( 1 HP for Transfer water from UG sump to OHT)) set capable of lifting 70 lpm of water against a total head of 20m - with accessories such as 40mm gate valve-2 nos. 40mm non return valve-2 nos etc pump panel etc complete .(Make Kirloskar/V Guard/Texmo or equivalent) |
| 326 | Electrification |
| 327 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & |
| 328 | Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 6 sq mm |
| 329 | Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm |
| 330 | Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 6 sq mm |
| 331 | Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 16 sq mm |
| 332 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG) |
| 333 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12SWG) |
| 334 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 335 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp |
| 336 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp |
| 337 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 338 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amp |
| 339 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 340 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 341 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole |
| 342 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 343 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 344 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 345 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 346 | Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 6 sq mm |
| 347 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 348 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required.25 mm |
| 349 | Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm |
| 350 | Supply and installation of outdoor type junction box of size 140mm x 140mm x 95mm for accommodating control gear/drivers for led strip lights. |
| 351 | Supply and installation of outdoor type junction box of size 200mm x 140mm x 95mm including providing 32A 6way neutral link, 6way earth link , minimum 6 terminals minimum 10A capacity , knockouts for cable in and out suitable for fixing on wall/pole(Sintex GSJB-2014 or equivalent) |
| 352 | Supply and installation of FRP outdoor type junction box of (nearest )size 240mm x 130mm x 110mm including 5way terminals of minimum 32A 10way neutral link,10way earth link, minimum 10 terminals of minimum 16A capacity , knockouts for cable in and out suitable for fixing on wall/pole(Sintex GSJB-2413 or equivalent) |
| 353 | Supply and installation of FRP outdoor type junction box of (nearest )size 210mm x 150mm x 90mm including 5way terminals of minimum 16A capacity , knockouts for cable in and out suitable for fixing on wall/pole(Hensel KF1616G or equivalent) |
| 354 | Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil). 3core 1.5 sq mm |
| 355 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required.4 X 16 sq. mm (28mm) |
| 356 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required including providing earth clips using nuts and bolts 4 X 6 sq. mm |
| 357 | Supply and installation of outdoor type junction box of size 140mm x 140mm x 95mm including providing minimum 4 terminals minimum 10A capacity , knockouts for cable in and out suitable for fixing on wall/pole. |
| 358 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required including providing earth clips using nuts and bolts 4 X 4 sq. mm |
| 359 | Supply and installation of PVC gland suitable for 3core 1.5 sqmm for outdoor application. |
| 360 | Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 40/32 mm or nearest size |
| 361 | Supplying and fixing 25A Contactor 3pole Power Contactor DIN Mounting type (LNT MNX25 or equivalent) in the existing DB and proving connections etc as required. |
| 362 | Supplying and fixing Analog Time Switch 240 VAC Base/DIN Mounting type with one timer unit having 30-minute Interval with 24-hour Programmable electromechanical operation(LNT J648B1 or equivalent) |
| 363 | Supply and fixing outdoor type (IP65) 48module polystyrene Distribution Board of approximate size 750mmX300mmX150mm with polycarbonate door and lid having 4rows each of 12 module suitable to accommodate DIN Rail equipment. upto 63A with cable entry cover, with blanking strips for unused DIN rail openings(Hensel KV998 or equivalent) |
| 364 | Supply, fabrication, conveyance, installation of feeder pillar box made using 2mm CRCA sheet suitable to accommodate DB of approximate size 750mmX300mmX150mm etc as required. |
| 365 | Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC) |
| 366 | Lighting Fixtures and Supports |
| 367 | Supply Installation Testing and Commission of 3W LED IP66 Inground lights of approximate dia 50mm body made out of Aluminium , Stainless steel front ring , toughened clear glass diffuser, integral type driver, symmetrical light distribution, less cost of housing concrete etc in position( KLite Model 4092 or equivalent) |
| 368 | Supply Installation Testing and Commission of 30W LED IP65 Flood lights suitable for mounting on existing iron structure/building made out of black powder coated Die cast Aluminium integral type driver less cost of foundation etc in position using necessary clamps if required( KLite Model 4287 or equivalent) |
| 369 | Supply Installation Testing and Commission of 3W LED IP66 Spot lights mounted on spikes of approximate height 320 mm/80 mm (as directed at site) made out of black powder coated Die cast Aluminium integral type driver less cost of foundation etc in position( KLite Model 4264/4263 or equivalent) |
| 370 | Supply Installation Testing and Commissioning of 30W LED IP66 Post top lantern of approximate size 500 mm height, 300mm width made out of black colour powder coated Die cast Aluminium ,Polycarbonate Diffuser Optical Lens, integral type drive with light output not less than 100 lumen per watt suitable for mounting vertically on pipe of outer diameter 50mm etc in position excluding cost of Flex Wire( KLite Model 4514-C0 or equivalent) |
| 371 | Supply and Erection of ornamental type cast iron pole of height 3m having provision for fixing 50mm dia Post top Lantern , foundation bolt holes including supply of suitable size bolts , pole coated with polyurethane based matt blank paint over zincromate primer/polyester powder coated black colour less cost of foundation.( KLite Model KP-4901 or equivalent) |
| 372 | Supply Installation Testing and Commission of 2way LED IP54 Wall washer Lights made put of aluminium body each of 3watts fixing the same using necessary etc in position (KLite, Philips, Crompton, Wipro or equivalent) |
| 373 | Supply Installation Testing and Commission of 12W/m LED IP67 Strip Lights with minimum 120LEDs per meter fixing the same using necessary clamps etc in position( KLite ,Philips, Crompton or equivalent) including installation of non integral driver |
| 374 | Supply Installation Testing and Commission of 18W LED IP68 Underwater White Fountain lights of approximate dia 150mm body made out of marine grade stainless steel 316,Diffuser made of 8mm thick step tempered glass , non integral type driver, less cost of housing concrete etc in position( KLite Model 4129 or equivalent) |
| 375 | Electrification of Digital Library |
| 376 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B |
| 377 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C |
| 378 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B |
| 379 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 380 | Supplying and fixing PVC batten/ angle holder including connection etc. as required. |
| 381 | Supply and renewing LED bulb 9W/10W in place of damaged one. |
| 382 | Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. |
| 383 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 384 | Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply |
| 385 | Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. |
| 386 | Supply, Conveyance, Installation, testing and commissioning of 300 mm sweep, , Light duty Exhaust fan working on 230V AC and fixing with necessary anchor bolts, nuts etc. as required |
| 387 | Supply, Conveyance, Testing and Commissioning of 400 mm sweep, 60 watt 1300 rpm 3 Nos blade with mesh guard working on 230 V A/C wall mounting fan in the existing wall using suitable size anchor bolt / Screws etc. and giving connection as required (Almonard/Bajaj/Usha/V-guard or its equivalent) |
| 388 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire |
| 389 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 390 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 391 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 392 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm |
| 393 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 1.5 sq. mm |
| 394 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) |
| 395 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) |
| 396 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm) |
| 397 | Supply and Fixing of floor mounted 3M electrical enclosure outlet |
| 398 | Supply and Faxing of 3 Module Pop-up Floor Boxes 100 x 100 size and giving connections etc as required, Legrand or equivalent make. |
| 399 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch |
| 400 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch |
| 401 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet |
| 402 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet |
| 403 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 404 | Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A SPswitch with indicator |
| 405 | Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3 pin plug top with indicator |
| 406 | Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket |
| 407 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts \"C\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 408 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door |
| 409 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door |
| 410 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43) |
| 411 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN verticalDB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) |
| 412 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 413 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) |
| 414 | Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG) |
| 415 | Supply and Fixing of 2 Pole IP 68 connector in position and giving connections etc. as required. |
| 416 | Supply, conveyance, installation, testing and commissioning of Surface Led Down light Luminaire having power consumption not more than 9W and light output not less than 1000 Lumens with System efficacy> 110 Lumen/Watt. Housing Shall be made of pressure die cast aluminium body with 60mm height suitable for installation in low heights and poly carbonate diffuser to reduce glare. The Luminaire should be having Minimum 50000 Burning hours(L70B50) with CRI 80, SDCM<5and Co related color temperature (CCT) of 6500K.The LED used in the luminaire shall be of make Lumileds, Osram or Bridgelux only . The luminaire must have 2.5KV surge protection integrated in driver, PF0.95, Total harmonic distortion THD10%,and Operating voltage range 160-270V and driver shall be separately BIS approved of same make equivalent to Philips / kesselec /Osram. LM80,LM79 Type Test certificate and Bis certificate need to be submitted. |
| 417 | Supply, conveyance, installation, testing and commissioning of Led Surface mounted 300*300 mm Luminaire having power consumption not more than 16W and light output not less than 2000 Lumen with System efficacy> 120 Lumen/Watt . Luminaire Housing Shall be made from single piece CRCA body without welding. The Luminaire should be having minimum 50000 Burning hours(L70B50) with CRI 80, SDCM<5 and Co-related color temperature (CCT) of 6500K.The luminaire must have 4KV surge protection integrated in driver, Ripple<5%, PF0.95, Total harmonic distortion THD10%, Operating voltage range 140-270V. Luminaire and driver shall be |
| 418 | Supply, conveyance, installation, testing and commissioning of 5 W LED wall washer light with IP65, black colour (Dimensions 78x87x4 mm) directly on wall including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required. Philips make 5 W LED wall washer light model No. 582060 or Techno commercial equivalent. |
| 419 | Supply, conveyance, installation, testing and commissioning of Surface Led Down light Luminaire having power consumption not more than 5.5W and light output not less than 600 Lumens with System efficacy> 110 Lumen/Watt. Housing Shall be made of pressure die cast aluminium body with 60 mm height suitable for installation in low heights and poly carbonate diffuser to reduce glare. The Luminaire should be having Minimum 50000 Burning hours (L70B50) with CRI 80, SDCM<5and Co related colour temperature (CCT) of 6500K.The LED used in the luminaire shall be of make Lumileds, Osram or Bridgelux only . The luminaire must have 2. 5KV surge protection integrated in driver, PF0.95, Total harmonic distortion THD10%,and Operating voltage range 160-270V and driver shall be separately BIS approved of same make equivalent to Philips / kesselec /Osram. LM80,LM79 ,Type Test certificate and Bis certificate need to be submitted |
| 420 | Supply, conveyance, installation, testing and commissioning of Track light having power consumption not more than 20W and light output not less than 1700 Lumen with System efficacy> 80 Lumen/Watt. Luminaire Housing made from aluminium. The Luminaire should be having Minimum 30000 Burning hours (L70B50) with CRI 80, SDCM<5 and Co related colour temperature (CCT) of 6500K. The LED used in the luminaire shall be of make Lumileds, Osram or Bridge lux only .The luminaire should have 4KV surge protection integrated in driver, PF0.95, Operating voltage range 220 240V. Luminaire and driver shall be separately BIS approved of same make equivalent to Philips / kesselec /Osram LM80,LM79 ,Type Test certificate and Bis certificate need to be submitted |
| 421 | Supply and Fixing of track mounted accent lighting luminaire in pressure die cast housing with 1 Meter Track etc as required. |
| 422 | Supply and Fixing of track mounted accent lighting luminaire in pressure die cast housing with 2 Meter Track etc as required. |
| 423 | Supply, conveyance, installation, testing and commissioning of LED step light Luminaire having power consumption not more than 4W and light output not less than 400 Lumen with a nominal efficiency 100 lumen/watt. The housing should be of die-cast aluminium with IP67 and IK0.The Luminaire should be having Minimum 25000 Burning hours(L70B50) with CRI 70, SDCM< 5 and co-related colour temperature (CCT) of 4000K. . The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire with PF>0.95 and THD<10%.Luminaire and driver shall be separately BIS approved of same make equivalent to Philips/ kesselec /Osram. LM80,LM79 ,Type Test certificate and Bis certificate need to be submitted. |
| 424 | Supply, conveyance, installation, testing and commissioning of 10W LED 4 way wall washer light with IP65, Anthracite colour (Dimensions 105x105x44 mm) directly on wall including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required. Philips make TETRIS 4-way 10W wall washer light model No. 800038 or Techno commercial equivalent. |
| 425 | Supply, conveyance, installation, testing and commissioning of 5 W LED pendent light, Matte black colour and directly on wall including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required. Philips make PICCOLO Black Pendant 5W pendent light model No. 800024 or Techno commercial equivalent. |
| 426 | Supply, conveyance, installation, testing and commissioning of 5W LED all weather in ground light with IP67 and grey colour body(Dimensions 55x55x90.6 mm) directly on wall including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required. Philips make IP67 LED In ground Light 5W or Techno commercial or equivalent. |
| 427 | Supply, conveyance, installation, testing and commissioning of SUPRA Make 3KVA/48V Online UPS (Digital series), Single Phase Input Single phase output Online UPS Pure sine wave, LCD display, with in-built Galvanic isolation Transformer and 4 Nos of 60 AH, 12V TUBULAR Battery with one hour back up and giving connections etc as required. |
| 428 | Supply, installation, testing and commissioning of wall mounting inverter split air conditioner unit conforming io IS 1391(Part II)(amendments-1 except power consumption norms) fitted with hermetically sealed compressor operating on 230V single phase AC supply, R32/R134/R410 /non CFC refrigerant capable of performing functions like cooling, dehumidifying, air circulating, filtering etc with copper condensing coil, white / off white colour of following capacity, with cordless remote control etc. 2 Tr 3 star inverter split AC unit with 3 years comprehensive warranty. The machine should have manufacturer warranty of 5years for indoor & outdoor PCB and 10 years for compressor. Make - Mitsubishi Electric or equivalent. |
| 429 | Supply, Conveyance & Installation of Voltage stabilizer suitable for split type 2 TR AC unit, capacity 15A with voltage range of 175-275V and out put range of 210 240V (V Guard VG500) or its equivalent. |
| 430 | Supply and fixing factory made Heavy Duty Bracket for fixing Outdoor unit stand for 1/1.5/2 TR AC. |
| 431 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 432 | Supply Installation Testing and Commission of 12W LED IP66 Spot lights mounted on spikes of approximate height 450 mm/120 mm (as directed at site) made out of black powder coated Die cast Aluminum integral type driver less cost of foundation etc in position( K-Lite Model 4267/4268 or equivalent) |
| 433 | DIGITAL EQUIPMENTS FOR KNOWLEDGE VAULT BUILDING |
| 434 | Supplying and providing Voltas 320 L Single Door Upright Freezer in Cafeteria/Stationery shop |
| 435 | Supplying , providing and fixing Voltas CVF320DD-P Double Door Convertible Deep Freezer in Cafeteria including all cost etc complete |
| 436 | Supplying INTERACIVE KIOSK having following specification including all cost etc complete Touch Technology -IR/ PCAP Multitouch Aspect Ratio -16:9 OS Support -Android Controller – 4GB ,32GB Android Wifi ,BT , USB ,HDMI Interfaces Floor Stand – K type Floor Stand Textured Powder Coating Warranty -1 Year Advantech UTC 542 ,42’’ Touch Screen AIO and K type Stand (Suitable for industrial Purpose) |
| 437 | Supplying DIGITAL BOOKS/ Flip Book with software application with following specification 22’’ Flip book AIO Android with floor Mount -Model Advantech UTC 120 , 4GB RAM ,128GB SSD Wifi ,BT , USB ,RJ 45 Interfaces Software Application Subscription Flip Book Cloud based application /screen /Year |
| 438 | Supplying and providing VR EXPERIENCE CENTRE- having following specification including all cost etc complete- Meta Quest 3 Advanced all-in-One MR- Headset 128 GB/White with controllers- Meta Quest Link Cable- 3 Adjustable plastic Strap |
| 439 | Supplying and fixing Outdoor LED Screen(P4)- 1 No.s- Primeseries P4Outdoor led screen 6.30ft x 9.45 ft- Novastar Media Player 2- Structure,installation , delivery Commissioning |
| 440 | Supplying and installing Outdoor KIOSK - 1 No.s Offline CMS(Content Management Software) |
| 441 | Supplying and providing Audio books having the following specification all cost etc complete. Tablet - Xiaomi pad 6 or equivalent, Qualcomm snapdragon 870.powered by Hyper OS,144 HZ refresh rate,8GB,256 GB,2.8K + Display(11-inch/27.81 cm)Tablet, Dolmy vison Atmos, Quad speaker, Wifi, Head phone with charging cable sony or equivqlent WH-CH 720 N Noice cancellation, Wireless blue tooth over ear headphones with Mic up to 50Hrs battery, Height adjustable stand, Headphone holder, Audio book library ,Exclusive content, Offline listening, Adjustable speed,12 lanquage with Audio Book App licence(Subscription plan |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
