Name of Work: Gated Cement Nala Bandhara At Waghambe Nimbrewadi, Tal : Guhagar , Dist : Ratnagiri.
Sl. No.
Item Description
1
Excavation in soil,soft murum, lime,shaduexceeding 1.50 m.in width including depositing the material as dieected with lead up to 15 m.and liftto 1.50 m. including.
2
Excavation in soft rock exceeding 1.50min widthincluding depositing the excavated naterial as directed with lead upto 15 m and lift upto 1.50m including dressing .
3
Excavation in hard rock exceeding 1.50m in width by blasting including depositing the excavated naterial as directed with lead upto 15 m and lift upto 1.50m includingdressing (This includes boulders of size more than 0.10 cum under other items)
4
Providing and laying in situ cement concreteof grade M 15 ( Below 40 MSA ) of trap/ and bedding, compacting and curing, including Royalty of material etc. completestrength etc lifts including testing of concrete compressive with all leads and
5
Providing & Cutting bending hooking laying in position and laying M S bars for reinforcement ofRCC work as per detailed drawing etc. complete.
6
Constructing of embanking for Casing zone withselected material directly from borrow area including transporting the material with all leads and lifts laying in layers , watering and consolidation including royalty ofleveling ,spreading including material etc. complete.( Refilling gap of foundation )
7
Providing and fixing Road junction / Information sign board of size 1.20 m x 0.75 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective transperent coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in- charge etc. complete. Spec. No.: MORTH 801 I.R.C.: 67-1977 P.W.D. D.S.R.2013-14 It No 39 RD /Pg 192
8
with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includesall materials, Labour charges, machinery 1km lead charges of transportation, loading and
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
