|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 3 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 4 | M&L for preparation on old plastered surfaces of any description on walls including brooming down or steel wire brushings, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oils and greasy spots and applying one coat of oil bound distemper complete all as specified and directed. |
| 5 | All as per item No.4 above but on ceilings ditto. |
| 6 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 7 | M&L joint free Non Skid glazed ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including provision of screed bed 15mm thick in CM (1:6) complete all as specified and directed. |
| 8 | M&L machine cut kota stone slab flooring 18-20mm thick over cement screedbed laid and jointed with grey cement slurry mixed with pigment to made the shade of the slab including rubbing and polishing complete over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 9 | M&L for treating cement concrete surfaces with three dressing of sodium silicate solution complete all as specified and directed. |
| 10 | Roughening surfaces of old concrete floor by picking sweeping cleanand washing downwith water to remove dust etc complete all as specified and directed. |
| 11 | M&L for brick work old size with subclass \"B\" bricks straight or curved on plan not exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 12 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 13 | M&L for preparation of new plastered surfaces of any description on walls & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. over a coat ofprimer complete all as specified and directed. |
| 14 | M&L 15mm thick cement plastering on brick / concrete surfacesin CM (1:4) finishing surfaces even and fair without using extra cementcomplete all as specified and directed. |
| 15 | Supply only integral water proofing compound ISI marked complete all as specified and directed. |
| 16 | Dismantling of cast iron drain pipes of 100mm bore, jointed in cement mortar including taking out from trenches if required including separating serviceable pipe for reuse complete all as specified and directed. |
| 17 | All as per item no 16 above but for 75mm bore complete all as specified and directed. |
| 18 | Supply, laying, jointing and testing 110mm bore PVC (SWR) pipes single socketed in any length with rubberring joints, fixed to walls with suitable size clamps, nuts bolts etc complete all as specified and directed. |
| 19 | Supply, laying, jointing and testing 75mm bore PVC (SWR) pipes single socketed in any length with rubberring joints, fixed to walls with suitable size clamps, nuts bolts etc complete all as specified and directed. |
| 20 | S&F in repair 75mm PVC (SWR) bend any radius complete all as specified and directed. |
| 21 | All as per item No 20 above but 110mm dia complete all as specified and directed. |
| 22 | S&F in repair 75mm PVC(SWR) junction single(single T) equal or unequal complete all as specified and directed. |
| 23 | All as per item No 22 above but 110mm bore of pipe complete all as specified and directed. |
| 24 | S&F in repair 75mm PVC (SWR) floor trap with grating including jointing with solvent cementcomplete all as specified and directed. |
| 25 | S&F in repair 75mm PVC (SWR) vent cowl complete all as specified and directed. |
| 26 | All as per item No 25 above but 110mm complete all as specified and directed. |
| 27 | Dismantling and breaking up drain pipes 150mm (Salt glazed stone ware or concrete) of following bore of pipe (Internal), set in cement mortar including taking out from trenches if required and removing from the site complete all as specified and directed. |
| 28 | Dismantling and breaking up drain pipes 100mm (Salt glazed stone ware or concrete) of following bore of pipe (Internal), set in cement mortar including taking out from trenches if required and removing from the site complete all as specified and directed. |
| 29 | M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes 150mm including packing under and hunching against the side of pipes after they are laid, jointed and tested for the following bore of pipe lines complete all as specified and directed. |
| 30 | M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes 100mm including packing under and hunching against the side of pipes after they are laid, jointed and tested for the following bore of pipe lines complete all as specified and directed. |
| 31 | M&L for Salt glazed stone ware (SGSW) drain pipe 150mm, (internal) in, trenches and jointed including testing complete all as specified and directed. |
| 32 | M&L for Salt glazed stone ware (SGSW) drain pipe 100mm, (internal) in, trenches and jointed including testing complete all as specified and directed. |
| 33 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) butn exc 1.5 sqmcomplete all as specified and directed. |
| 34 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) but exc 1.5 sqm and n.exc 4 sqm complete all as specified and directed. |
| 35 | M&L 1.25 mm thick pressed steel frame of size 105X 60 mm for door with one ore more rebate includings necessary fixing lugs, stainless steel hinges, locks strike plate etc complete all as specified and directed. |
| 36 | M & L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximumtoxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 andresistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 37 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 38 | M&L powder coated (minimum thickness of powder coated 50 micron) aluminiumframe and shuttersfor doors and windows ventilators with one or more rebates including joint cleats for fixing, rubber packing, screws, filling with silicon in gap between wall and frame of doors and windows etc complete all as specified and directed. |
| 39 | M&L 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 40 | S&F aluminium anodised butt hinges medium weight , cold rolled, 100mm, ISI marked complete all as specified and directed. |
| 41 | S&F aluminium anodisedbarrel tower bolts stove enamelled black of size 200 mm complete all as specified and directed. |
| 42 | S&F 150 mm long aluminium anodised handles or extruded section complete all as specified and directed. |
| 43 | S&F 300mm long Aluminium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloycomplete all as specified and directed. |
| 44 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified and directed. |
| 45 | M&L for 4mm thick designer false ceiling \"E\" board including powder coated galvanised iron snap grid frame work of size 605 x 605 mm for false ceiling comprising of Main runner \"T\" section of size 38mm x 24mm x 0.40mm thickness, Cross \"T\" of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed and applying two coats of oil bound distemper over ceiling surfaces complete all as specified and directed. |
| 46 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete along with fittings such as switches ,Sockets, ceiling rose , lamp holder ,tube light fittings and making good disturbed surfaces on walls etc complete all as specified and directed. |
| 47 | M&L for point wiring with 1.5sqmm PVC insulated unsheathed multistranded copper cable of FRLSH grade with one run of 1.5 sqmm PVC insulated copper cable as earth continuity drawn in surface PVC Casing-Caping not less than 20mm width with pressed steel in concealed MS box duly including covered with 3 mm thick hylem sheets for mounting switches/Sockets, accessories such as spacers, saddles, junction boxes for one light / fan point / Bell point/5 amp socket controlled by one switch complete all as specified and directed. |
| 48 | All as per item No 47 above but, one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and directed. |
| 49 | All same as per item No.47 herein before but for stair case light point controlled by 2 Nos of 2 way switches for stair case wiring |
| 50 | All as per item no 47 here in beforebut using 2.5 sq mm single core copper conductor cable of multistrand FRLSH grade PVC insulated Unsheathed 1100 volt grade for 16 Amps socket combination pt. including running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to common earth dolly for One 6 pin multisocket outlet, 16Amps , independent complete all as specified and directed. |
| 51 | All as per item no 47 here in beforebut using 4 sq mm single core copper conductor cable of multistrand FRLSH grade PVC insulated Unsheathed 1100 volt grade for 16 Amps socket combination pt. including running of 4 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to common earth dolly for One 6 pin multisocket outlet, 16Amps , independent complete all as specified and directed. |
| 52 | Taking down carefully sub main wiring including batten/ conduit byunscrewing from wall, ceiling and making good surfaces to match with original status complete all as specified and directed. |
| 53 | M&L for sub main wiring with two single core PVC insulatedunsheathed stranded copper conductor of 4 sqmm (nominal area) FRLSH drawing through PVC cashing caping and one 6 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade FRLSH for earth continuity conductor and connecting with main earth dolly complete all as specified and directed.NOTE: 3 runs of 4 Sqmm and 1 run of casing caping will be measured as one unit i.e RM |
| 54 | M&L for sub main wiring with two single core PVC insulatedunsheathed stranded copper conductor of 6 sqmm (nominal area) FRLSH drawing through PVC conduit/ concealed conduit and one 6 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade FRLSH for earth continuity conductor and connecting with main earth dolly all as specified and as directed.NOTE: 3 runs of 6 Sqmm and 1 run of conduit will be measured as one unit i.e RM complete all as specified and directed. |
| 55 | Supply and fixing of switch piano, flush type, single pole, one way, 6 Amp complete all as specified and directed. |
| 56 | Supply and fixing switch 2 Way 6A complete all as specified and directed. |
| 57 | S&F ceiling rose surface bakelite 3 terminals 65X50mm 230V including PVC Box of size 3\"X3\" roundtype complete all as specified and directed. |
| 58 | Supply and fixing Bell Push 6 Amps complete all as specified and directed. |
| 59 | Supply and fixing of bell electric Ding Dong type, Ac 230 volts fixedcomplete all as specified and directed. |
| 60 | S&F forsocket out let 3 pin 6Amps flush type, 230V complete all as specified and directed. |
| 61 | Supply and fixing Switch socket combination 6A, 2 in 1 complete all as specified and directed. |
| 62 | Supply and fixingSwitch socket combinationflush type 6A/16A, 5 in 1 complete all as specified and directed. |
| 63 | Supply and fixing in replacement 10 Watt LED Bulk Head fitting, IP 66, IK 09, surge protection level until 2.5 KV, beam angle of light source 120 degree, light source colour cool day light, 6500 K, 120 degree, polycarbonate lance cover, burning hour 50000 hr, Aluminium dia-Cast housing material complete all as specified and directed. |
| 64 | Supply and fix in replacementLED retrofit lamp 9/10 Watt having B22holder base with polycarbonate body and aluminium heat sink complete all as specified and directed. |
| 65 | Supply and fix in replacement lamp holder PVC/ Poly Carbonate type with back plate for LED bulb of any type complete all as specified and directed. |
| 66 | S&F light fitting 1 x 20 Watt, 220 V retrieved from item no 1 connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Note:-Rate is inclusive of flexible copper cable. |
| 67 | S&F light fitting 1 x 9 Watt, 220 V retrieved from item no 1 connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Note:-Rate is inclusive of flexible copper cable. |
| 68 | Supply and fix in replacement of LED building security light35W, 230 V AC outdoor type with high pressure die aluminium housing and heat resistance complete with driver, lamp bracket with impact resistance IK08 and corrosion resistance including thermal management in multiple optics complete with IP 66 protection, lumen output 4200 complete having 40/32 mm dia GI pipe having 1.5 m length complete all as specified and directed. |
| 69 | Supply and fix ofexhaust Fans in replacement steel body, 300mm sweep 1400 rpm, heavy duty, AC single phase, 230 volts including louvers, blades and frame connection withmultistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and directed. |
| 70 | Supply and fix ofExhaust Fan made of sturdy Engineering Plastic complete with louvers shutter, voltage 230 V, 50 HZ, RPM 1200 copper winding of sweep250 mm includingconnection withmultistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and directed. |
| 71 | Supply and fix of electric water heater 25 Ltrs capacity storage typesteel body with vitreous Enamel powder Coated Corrosion resistance tank, Dual color LED Knob for indicating operation and Copper heating element of 2 KW capacity BEE 5 star rating, AC single phase, 230 volts including connection, necessary fixing arrangement i.e anchor nut, bolt, washer, safety valve, thermostat, NRV, stainless steelconnector for hot/ cold water made of double layer nylon braided and fabric at a pressure of 6kg/sq cm at both ends, 600 mm long, heavy duty with CP brass adopters, washers, suitable for 15 mm bore pipe etc and grouting and making good to disturbed surface complete all as specified and directed. |
| 72 | Taking down carefully old unserviceable MCB DBs with MCBs any type byunscrewing from wall, ceiling and making good surfaces to match with original status complete all as specified and directed. |
| 73 | Supply & fix MCB DB 8 way SPN with 200 A rated bus bar, 240 Volts, Double door complete all as specified and directed. |
| 74 | Supply and fix Vertical TPN DBs, Double metal door, 6 way, IP-54, IK 09 with provision for MCCB 4 Pole, 125 Amps as Incomer and SP/TP MCB as outgoings and provided with insulated vertical phase/Neutral bus bars complete all as specified and directed. |
| 75 | S&F sheet metal enclosure single pole and neutral enclosure with two pin and earth plug and socket complete with one SPN MCB 20 Amps capacity complete all as specified and directed. |
| 76 | Supply & fix MCB SP 6 to 32 Amps 240 Volts, C curve, 10 KA complete all as specified and directed. |
| 77 | Supply & fix MCB SP 40 Amps 240 Volts, C curve, 10 KA complete all as specified and directed. |
| 78 | Supply & fix MCB SPN, 32 Amps, C Series, 240 Volts, 10 KA complete all as specified and directed. |
| 79 | Supply & fix MCB SPN, 40 to 63 Amps, C Series, 240 Volts, 10 KA complete all as specified and directed. |
| 80 | Supply & fix MCCB 125 Amps 36 KA 4 pole 415 Volts 50 HZ complete all as specified and directed. |
| 81 | M&L for cutting openings, through brick / stone walls built in cement mortar forfixing exhaust fans of 300mm sweep including making good incement mortar 1:4 tomatch withexisting wallcomplete all as specified and directed. |
| 82 | M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less than 1.5 M below ground level connected with galvanised earth wire 4 mm dia by means of bolts nuts check nuts and washers of galvanised iron to earth test point all as specified or indicated including necessary excavation and earth work any type of soil PCC (1:3:6) watering funnel, GI tubing 20 mm for watering as shown in electrical plate No.5 of SSR part 1 complete all as specified and directed. |
| 83 | NOTES :-1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. |
