Providing Labour For Day To Day Maintenance Civil Works For Residential & Non-Residential Buildings And Services (03 Months) At Institute Of Human Behaviour And Allied Sciences (Ihbas), Dilshad Garden, Shahdara, Delhi I/C Supply Of Materials Through Outso, dilshad-Delhi

Providing labour for Day to day Maintenance Civil works for Residential & Non-Residential Buildings and Services (03 Months) at Institute of Human Behaviour and Allied Sciences (IHBAS), Dilshad Garden, Shahdara, Delhi i/c supply of materials through outsourcing dg. 2025-26.-Providing labour for day to day maintenance and up-keep of all internal and external assets of Institute of Human Behaviour and Allied Sciences (IHBAS), Dilshad Garden, Shahdara, Delhi under the jurisdiction of PWD (GNCTD) i.e. (All Non-Residential and Residential complexes) complete without materials, labours (list of minmimum labours in NIT) including repair/replacement of damaged/ defective parts related to carpenty work, water supply/ sanitary installation work and cleaning/ maintaining of open drain/ sewerlines manholes, traps, welding of existing broken grills, hinges, door, window, gates and railling etc. complete by providing sufficient labour in proper uniform i/c T&P and material as required on all days (9.00 AM to 05.00 PM) excluding sunday & gazetted holidays, however Emergent complaints related to plumbing and sewerage and others shall be attended round the clock daily from 6.00 AM to 2.00 PM, 02.00 PM to 10.00 PM and 10.00 PM to 6.00 AM in three shifts including all sunday and gazetted holidays. 2 Supplying and stacking of Materials at service centre of IHBAS Hospital i/c carriage as per specification and direction of Engineer-in- Charge.(Nothing shall be paid for fixing / labour component as it is included in Item no. 1, day to day maintenance) 3 Stone Aggregate (Single size) : 20 mm nominal size 4 Portland Cement (OPC-43 Grade) 5 White Cement 6 Coarse sand (zone III) 7 Fine sand (zone IV) 8 Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings 9 Oxidised mild steel butt hinges 100x58x1.90 mm 10 Anodised Aluminium butt hinges 100x75x4 mm 11 Anodised Aluminium sliding door bolt 250x16 mm 12 Anodised Aluminium tower bolt (barrel type) 200x10 mm 13 Anodised Aluminium tower bolt (barrel type) 150x10 mm 14 Anodised Aluminium handles 125 mm with plate 175 x 32 mm 15 Aluminium hanging floor door stopper with twin rubber & stopper 16 PTMT Angle Stop cock with Flange 15 mm 17 G.I. Pipe 50mm nominal size 18 PTMT - Waste Coupling 31/32 mm 19 PTMT Bib Cock 15mm 20 PTMT stop cock 15 mm dia(male thread) 21 PTMT Piller cock 15 mm nominal bore 22 PTMT push cock 15 mm dia. 23 PTMT Ball Cock 15mm Complete with Epoxy Coated Aluminium Road & H.D. Ball 24 PTMT Ball Cock 20mm Complete with Epoxy Coated Aluminium Road & H.D. Ball 25 PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. Ball 26 PTMT Urinal Spreader 15mm 27 Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia. 28 Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia 29 PTMT Soap Dish/Holder 138x102x75 mm 30 CP Brass pillar cock 15mm 31 Adhesive solvent cement 32 Ply wood 5 ply with commercial ply on both faces 6 mm thick 33 Brass. screws 30 mm 34 Brass. screws 25 mm 35 Brass. screws 20 mm 36 C.P. Brass. Extension Nipple (1/2x2 size) 37 All drive screws (for gypsum board) 38 UPVC Pipe (working pressure 4kg per sqcm) Single socketd pipe 110 mm dia 39 UPVC Coupler for UPVC Drainage pipe 110 mm 40 UPVC Single equal Tee(without door) 110x110x110 mm 41 UPVC bend 87.5° 110 mm bend 42 Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) 43 Stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm 44 Vitreous china orrisa type W.C. pan of size 580 mm 45 Vitreous china pedestal type water closet 46 Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe) 47 White plastic seat (solid) with lid C.P. brass hinges and rubber buffers 48 Vitreous china flat back wash basin 550x400 mm 49 Mirror of superior make glass 60x45 cm 50 Prelaminated flat pressed three layer or graded wood particle board with both sides decorative lamination,(medium density) Grade I, Type II conforming and marked to IS : 12823 (exterior grade) 12 mm thick 51 Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire 52 White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS:2556 53 Double action hydraulic floor spring with stainless steel cover plate 54 Hydraulic door closer tubular type Aluminium section body 55 Putty for wood work 56 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C. 57 G.I. Union 50 mm nominal bore 58 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet 59 C.P. Brass bibcock 15 mm 60 C.P. Brass long body bibcock 15 mm 61 C.P. Brass angle valve 15 mm 62 Precast R.C.C. grating with frame 500x450 mm horizontal grating 63 3 mm thick translucent white acrylic plastic sheet 64 EPDM Gasket for uPVC window/door 65 15 mm PTMT bib cock long body with flange 66 PTMT grating 100 mm dia 67 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts 68 PTMT- Towel Ring 215x200x37 mm 69 Ceramic Glazed Tiles 1st quality minimum thickness 5mm in all colours shades and designs except burgundy, bottle green, black 70 PVC connection pipe 600 mm long and 15mm nominal bore with PTMT Nuts. 71 M-seal (In packing of 100 gms) 72 PVC cistern handles for PVC low level cistern 10lit. Capacity 73 PVC syphon Set for PVC Low level cistern 10 lit capacity 74 PVC tank cover for overhead tanks of various capacities 75 GI Nipple 15 mm D/Size 76 CPVC tee 20mm ( plain) 77 CPVC tee 25mm( plain) 78 CPVC Socket20mm ( plain) 79 CPVC Socket25mm ( plain) 80 CPVC Elbow 20mm ( plain) 81 CPVC Elbow 25mm ( plain) 82 GI Tank Nipple 20mm 83 GI Tank Nipple 25mm 84 PTMT health faucet with 1.5m long flexible tube 85 Dripseal PJS 43 Pipe joint sealant for sand cast iron pipe joint. 86 CPVC Brass. F.Threaded Elbow 20 mm 87 CPVC Brass. M.Threaded Elbow 20 mm 88 CPVC Brass. M.Threaded Socket 20 mm 89 CPVC Brass. F.Threaded Socket 20 mm 90 CPVC Brass. F.Threaded Tee 20 mm 91 Dr. Fixit (Water proof) 101 LW + 92 PTMT Two in one bib cock 93 PTMT Two in one stop cock 94 CPVC Ball valve 20 mm 95 CPVC Ball valve 25mm 96 CPVC tank nipple 25 mm 97 Teflon tape 98 Pipe metal clamp 20 mm 99 PTMT Pillar Cock Swan Neck (Shakti SXT-134) 100 PTMT Steel Sink Jali 125 mm 101 Soot Gola

Refer document

INR 65994.0 /-

INR 32.99 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB