Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-06-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-06-2025 |
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness, includingNainital or similar pattern roof coverings. |
| 2 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 4 | Dismantling boarding, any description, fixed in any position with nails. |
| 5 | S&F second class hard wood weather boarding 20mm thick plained one side with butt joints as in eaves board complete. |
| 6 | Dismantling mild steel work of any description not otherwise provided. |
| 7 | S&F Roof trusses (framed), trussed, purlins, trusses gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,channel or flat sections) including distance pieces, cleats etcFe 410-W (Gde E-250) quality A. |
| 8 | S&F MS works as in wind ties for roof including securing bolts etc complete all as specified. |
| 9 | M&L for painting two coats of synthetic enamel paint over one coat of red oxide including preparation to new or previously untreated steeland surfaces of any description, not otherwise described, over10 cm width or grith all as specified and directed. |
| 10 | M&L for painting one coat of synthetic enamel paintincluding preparation topreviously treated old steelsurfaces of any description, not otherwise described, over10 cm width or grith all as specified and directed. |
| 11 | M&L for preparation new Steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete |
| 12 | Dismantling of ceiling boards of any description and any thickness, fixed in any position all as specified and directed incl cover fillets if any size. |
| 13 | Refixing false ceiling with aluminium grid work (size of grid 600x600mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle Hangers 6mm dia. G.I (upto 1200mm length) adjusting level fixed to roof slabs means of ceiling cleats made out of G.I flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longand Eco board of size 600 x 600x 4mm thick in aluminium frame work complete all as specified. |
| 14 | M&L for false ceiling with aluminium grid work (size of grid 600x600mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle Hangers 6mm dia. G.I (upto 1200mm length) adjusting level fixed to roof slabs means of ceiling cleats made out of G.I flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 15 | S&F in repairs Eco board 600 X 600 X 4mm thick fixed in aluminium frame work with screws or nails etc complete all as specified and as directed by Engr-in-charge. |
| 16 | M&L for taking down existing roof treatment of any description and cleaning the( surface by scrubbing and cleaning with water and disposing off the rubbish outside the premises. |
| 17 | M&L for screed bedding 10mm thick in CM 1:4 using water proof compound on roof finished even and smooth (WPC will be measured and paid separately) |
| 18 | M & L for water proofing treatment with the following specifications as per manufacturers instructions:-(i)Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primed surface using glass fibre base bitumen felt, grade 2.(ii)Laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than150 gms/sqm) laid on primed surface by forced application, with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm.(iii) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane.(iv) Applying a coat of bituminous aluminium paint over a coat of primer all as per manufacturers’ instructions. |
| 19 | S&F Rotational moulded polyethlene water storage tank 500 litres capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part I including dismantling the same complete. |
| 20 | Taking up or down 15mm dia bore steel tubing galvanised and connections complete all as specified and directed. |
| 21 | Taking up or down20mm dia bore steel tubing galvanised and connections complete all as specified and directed. |
| 22 | S & F 15mm dia bore unplasticised PVC pipes of pressure rating 10kgf/Sqcm with all fittings and fixed complete to walls and ceilings or laid in floor incl cutting chases for concealed water tubingand making good, cutting not exc 10 cm girth etc complete all as specified and directed. |
| 23 | S & F 20mm dia bore unplasticised PVC pipes of pressure rating 10kgf/Sqcm with all fittings and fixed complete to walls and ceilings or laid in floor etc complete all as specified. |
| 24 | S & F in repairs Pillar taps , cast copper alloy , with capstan heads , chromium plated , screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm incl necessary fittings, all as specified. |
| 25 | S&F in repair vitreous china wash hand basin white flat back size 630x450mm incl brackets, PTMT coupling, 32 mm GI pipe waste pipe complete all as specified. |
| 26 | S & F in repairs sink, made up of stainless steel, 1mm thick for kitchen or laboratory with plug, waste pipe, washer, including bedding in cement mortar 1:3 into dwarf wall or cantilever brackets and connecting union to pipe, over all size 495 x 420mm, bowl size 410 x 330 x 160mm etc, complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S & F stainless steel, plate rack of size 750 x 780mm with all fittings as per sample kept in GE\"s office and as directd by Engineer - in - Charge. |
| 28 | S&F 20mm dia Gun metal globe or gate valve with iron wheel head, screwed both end for iron pipe including taking down. |
| 29 | M&L for 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms)including taking down. |
| 30 | S&F 15mm dia Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) including taking down angle stop valves of any description all as specified. |
| 31 | S & F in repairs shower rose cast copper alloy chromium plated, of size 125mm all as specified and directed. |
| 32 | S & F in repairsBib tap cast copper alloy chromium plated,15 mm dia with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed. |
| 33 | S & F in repairs Mirror of selected quality glass 600 mm x 450 mm bevelled edge mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs and CP brass screws & cup washers all as specified and directed. |
| 34 | S&F PVC connections of 15mm size with PTMT nuts of length 450mm complete all as specified. |
| 35 | S&F vitreous china water closet, pedestal type, white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc including taking down existing water closet squatt pattern complete all as specified and as directed by Engineer-in-Charge |
| 36 | S&F in repairs 2 in 1 bib cock chromium plated 15mm dia bore pipe complete all as specified and as directed. |
| 37 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 38 | Supply only PVC flushing cistern 10 litres capacity syphonic action type, low level, white with inlet, ball valve, float, handle and flush pipe,etc complete all as specified and directed. |
| 39 | M&L for pvc floor trap,75mm outer dia,with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) |
| 40 | M&L for cast iron Nahani trap,75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) |
| 41 | S&F in repairs Aluminium anodised tubular towel rail 20mm dia complete all as specified. |
| 42 | S&F in repairs aluminium anodised brackets fortowel rail all as specified. |
| 43 | Dismantling of CI drain pipes,50-100 mm dia jointed in cement mortar. |
| 44 | Supply and fix in repairs PVC (SWR) pipes 110 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 45 | All as per item above but 75mm bore of pipe all as specified and directed. |
| 46 | Supply and fixin repair 110mm PVC (SWR) bends any radius with access door all as specified and directed |
| 47 | All as per item above but 75mm bore of pipe all as specified and directed. |
| 48 | Supply only 110mm dia PVC (SWR) single/Tee branch pieces(Equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches and jointed complete all as specified and directed. |
| 49 | All as per item above but 75mm bore of pipe all as specified and directed. |
| 50 | S&F only 110mm dia PVC (SWR) double branch pieces singly (Equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches and jointed complete all as specified and directed. |
| 51 | S&F only PVC (SWR) 110mm bore vent cowl all as specified and directed. |
| 52 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.(For Bars upto 12 mm diameter and Bars above 12 mm diameter ). |
| 53 | Providing and fixing hard drawn steel wire fabric of size 50 x 50 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of \"L\" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. |
| 54 | Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in- Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) (SBR based cement slury) |
| 55 | M&L for removing loose and broken concrete by chiselling /picking etc upto a depth of 80 to 100 mm from columns, beams and similar structural members cutting edges cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debries to a distance not exc 50 M all as specified and directed by Engr-in-Charge, including necessary scaffolding etc complete. |
| 56 | M&L for applying one coat of anti corrossive primer @ 0.25 Lit/Sqm for the steel area to exposed old and new reinforcement to the full circumfrance and length of bars to form unbroken 40 Micron thick film all as specified and directed by Engr-in-Charge. |
| 57 | M&L for applying one coat epoxy bonding agent @ 2.6 sqm/lit oras per manufactures instruction to old concrete surfaces all as specified and directed by Engr-in-Charge to surfaces of columns, beams and similar structural members all as specified |
| 58 | M&L for non shrink, cementitous micro concrete mixed with 12.5 graded stone aggregate using Renderoc RG or equivalent by weight (18 Kg Aggregate :25 Kg Renderoc RG) respectively (as per manufatures instruction) laid in average thickness 80 to 100 mm in surface complete all as specified and as directed by Engineer-in-Charge. |
| 59 | M&Lfor spraying curing compound as per manufactures instruction on freshly cast concrete surfaces all as specified.Make : Concure WB white of Fosroc or equivalent . |
| 60 | M&L for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 20 mm from floor/roof slab/chajjasand similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debries to a distance not exc 50 M all as specified and directed by Engr-in-Charge, including necessary scaffolding etc complete. |
| 61 | M&L for application of high build polymer modified cement mortar (1:2.5) mixed with 3 kg SBR per bag of cement in ceiling surfaces 10 to 20mm thick in two layers surfaces over a coat of bonding agent Nito Bond SBR (1 Ltr SBR + 1 Ltr) water + 3 kg cement) (as per manufacturer\"s instructions) complete all as specified. |
| 62 | M&L for drilling holes in slabs/wall/column/beams for anchor steel reinforcement incl washing with water, inserting lock setP\" in the holes and all as specified and directed by Eng-in- Charge.Make : Lock set \"P\" of Fosroc or equivalent . |
| 63 | M&L mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips |
| 64 | M&L Mild steel TMT bars 6-8mm dia. And over upto & including 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips as in stirrups binders and spacers. |
| 65 | Demolition of RCC in chajja, fins, facia column edges including cutting reinforcement etc., all as specified and as directed. |
| 66 | M&L fair finished flat Form work to RCC Chajjas and similar items including edges |
| 67 | M & L for RCC M-30(using 20mm graded stone aggregate)includingchajja all as specified and as directed by Engineer-in-Charge. |
| 68 | M&L extra for drip mould 40mm x 10mm and similar work not exc 15cm width for RCC chajjas etc |
| 69 | M&L Plain Cement Concrete Type B1 1:2:4 (using 20 mm gradedstone aggregate) in roof kerbs, mud stops or chamfered on edges. |
| 70 | M&L fair finished flat Form work to RCC ,fins facia, para pets and similar items including edges |
| 71 | M & L for RCC M-30 (using 20mm graded stone aggregate)including, fins, facia, etc., all as specified and as directed by Engineer-in-Charge. |
| 72 | Note for SL item Nos 52 to 71: The non destrutive test to be carried out by the contractor based on IS code 516 (Part 5/Sec 1): 2018 after repair work. The test result of hard surface of repaired area will meet the requirement as per IS code 15988:2013, 13939:2000, IS 456:2000 and seismic Zone V. If the test result is not meeting the requirement, then the contractor will rectify the work at his own cost. The test to be carried out in each repaired member of all buildings randomly as directed by theEngr-in-charge/GE. The test result recorded date wise, duly signed by the contractor, Engr-in-chage, GE and kept in safe custody. The cost of tests are inclusive in quoated rates. |
| 73 | M & L for Brushing neat cement slurry with 3 kg of cement per Sqm |
| 74 | S & F coloured joint free non Skid ceramic tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set, jointed and pointed in white or coloured cement to match over screed bed in cement mortar 1:4, 15 mm thick, all as specified. |
| 75 | M & L for machine cut kota stone slab20 to 25mm thick in treads of steps in stair laid and jointed with white cement slurry mixed with pigments to match the shade of the slab incl rubbing and mirror polishinglaid over cement screed bed in cement mortar 1:4, 20mm thick, complete all as specified. |
| 76 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 77 | S & F coloured glazed ceramic tiles 450 mm x 300mm x 7mm to 8mm thick on vertical surfaces such as skirting & dados etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces etc including backing coat of 10mm thick CM 1:3. |
| 78 | S & F coloured joint free non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set, jointed and pointed in white or coloured cement to match over screed bed in cement mortar 1:4, 15 mm thick, all as specified and directed. |
| 79 | M & L for granite slab 20 mmthick as in cooking platforms, bedded 15mm thick ,in cement mortor 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and as directed by Engineer-in-charge |
| 80 | Grinding, rubbing and mirror polishing of existing granite stone slabs complete all as specified and as directed by Engineer-in-charge. |
| 81 | Grinding, rubbing and mirror polishing of edges of existing granite stone slabs complete all as specified. |
| 82 | Taking down chowkats or frames with shutters area n.exc 1.5 Sqm each(without taking off shutters from the frame) all as specified and as directed |
| 83 | All as per Item No.81 above but area exc 1.5 Sqm but n.exc 4.00 Sqm |
| 84 | S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 85 | M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint all as specified. |
| 86 | S&F 2nd class hard wood 35 mm thick, plain, framed, panelled shutter factory made ( any number of panels) with panels of timber flat on both sides ( feather edged), or ofveneered particle board medium density, wood particle borard with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge |
| 87 | S&F 2nd class hardwood 35mm thick glazed and skeleton shutters, open rebatyed and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads of securing glass, gauze etc and fitted to chowkats all as specified and directed. |
| 88 | S&F solid PVC door frame ofsize 50mm x 47mmmade out of 5mm plain colour PVC sheet reinforced with MS square tube including taking down existing PVC door frame with shutter of any description all as specified and as per drawings. |
| 89 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C\" channel having at PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVCsheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVCsheet beading, and jointedtogetherwith solvent cement, suppling & fixing in the frame atsite as per specification & drawing. |
| 90 | Supplyand fixaluminium alloy wire mesh 0.45 nominal dia of wire and average width of aperture 1.40mm fixedwith aluminium wirestaples complete all as specified. |
| 91 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section. |
| 92 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 93 | S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 100mm Size |
| 94 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 95 | PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in hold fast blocks including necessary form work complete all as specified. |
| 96 | S & F Prelaminatd particle board 18/19mm thick interior grade for cup board, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work |
| 97 | S & F Hasp and staple 100mm size, safety type, Alluminium anodised withhinge pin including bolt to hinge plate and fixed with screws |
| 98 | S & F 100mm long Extruded Aluminium alloy handles, Fabricated type, anodised. |
| 99 | M&L Mild steel work as in band straps, supports or stays for rain water,valley gutter ,ventilating pipes, including bolts, if required; clamps , wall tie, hooks , angle cleats ,hold fast etc and similar small articles conforming to Fe 410-O or FE 310-O , all as specified and as directed by Engr-in- Charge. |
| 100 | S&F in repair Magic eye of brass body with dia of lense 16mm complete all as specified and as directed by Engineer in charge. |
| 101 | M&L for Post Construction Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors |
| 102 | M&L for Post Construction Anti Termite Treatment along the external wall below concrete ormasonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 103 | Supplyand fix in repair aluminium alloy wire mesh 0.45 nominal dia of wire and average width of aperture 1.40mm fixedwith aluminium wirestaples complete all as specified. |
| 104 | S & F in repair 150 mm long Aluminium, anodised, barrel tower bolts of extruded section. |
| 105 | S&F in repair Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 106 | S&F in repair Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 100mm Size |
| 107 | S & F in repair 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 108 | S & F in repair 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 109 | S & FAluminium anodised frame for doors, windows, ventilators with one or more rebates incl joining cleat for fixing etc complete all as specified and directed |
| 110 | S&F Aluminium anodised door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specifed and directed |
| 111 | S&F Aluminium anodised window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos), hinges type B-21 100mm long (2 Nos) suitable handle (1 no) complete all as specified and directed. |
| 112 | Supply only 4mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge. |
| 113 | Supply only 4mm thick figured glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge. |
| 114 | Supply only aluminium alloy wire mesh 0.45 nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as directed by Engineer-in-Charge. |
| 115 | Supply only Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type c-21 75mm Size |
| 116 | Supply only adjustable aluminium powder coated window handle with hook of size 125mm complete all as specified and as directed. |
| 117 | S&F anodised aluminium grill (anodised transparent or dyed to required shad according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to poper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 118 | Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 119 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement. |
| 120 | M&L rendering 5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6 on external surfaces of block masontry even and fair without using extra cement.(WPC shall be added in only 5mm thick top layer of plaster @ 3% by weight of cement content or as per manufacturers instructions.) |
| 121 | Supply only integral water proofing compound |
| 122 | M&L for rendering 5 mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling including cement slurry 3 kg/sqm. |
| 123 | M & L for two coats of OBD over a coat of primer on newly plastered surfaces of walls including nesessary preparation of surfacesall as specified and directed. |
| 124 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including prepartion and applying priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 125 | M & L for three coats of white wash on newly plastered surfaces of ceiling including nesessary preparation of surfacesall as specified and directed. |
| 126 | M & L for preparingold decorated surfaces of ceilingand applying two coats ofwhite washall as specified and directed. |
| 127 | M & L for two coats of OBDon old plastered surfaces of walls including nesessary preparation of surfacesall as specified and directed. |
| 128 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including complete removal of existing treatment and applying priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as specified and as directed. |
| 129 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete |
| 130 | M&L for preparation of old paintedwood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete |
| 131 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cmthickness (below or above ground level) all as specified and directed. |
| 132 | M&L for PCC 1:3:6, type C2,(Using 40 mm graded stone aggregate), 75mm thick as in plinth protection/Sub base flooring, finishing surface fair and even, in panels & filling joints with mortar, etc., complete all as specified and directed. |
| 133 | Material & labourfor chequred cement concrete tiles of size 20 cm x 20 cm x 25 mm with size of chips up to 12 mm jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:6)all as specified and directed. |
| 134 | M&L for Demoliotion of Reinforced cement Concrete parapet wall of any description and in any position not otherwise specifically provided for. |
| 135 | Supply and Fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290 (Gde E165) all as specified and as directed by Engg-in-Charge. |
| 136 | Supply and Fix Stainless Steel railing, (SS 316 grade) of safety railing consists of vertical and horizontal bars of thickness not less than 2.0mm, welded to base plate , MS plate, maintenance free, corrosion resistant, aesthetic looking stainless steel extruded sections complete all as specifieda and as directed by Engineer-in-charge. |
| 137 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for for frames and shutters of doors, windows, ventilators and cupboards including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 138 | Supply only 4 mm thick ACP board (Aluminium Composite Panel ) fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge. |
| 139 | M&L for carring out NDT test by using removed hammer/ core cutting on retrofittedstructoral elemants for veritying thestrength of structure to meet he reqmt of seismic zone V as directed by GE/ Engr in charge. |
| 140 | Taking down carefully aluminium point wiring(light, fan, socket or power) DBs, fitting lights complete offering credit, making good disturbed surfaces of walls, floors, etc, all as specified and as directed. |
| 141 | M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated andunsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets,fan regulators etc., all as specified and as directed for the following:- |
| 142 | (a) One light point controlled by one switch |
| 143 | (b) One exhaust fan point controlled by one switch |
| 144 | (c)One bell point controlled by one switch |
| 145 | (d) One fan point controlled by one switch and one regulator |
| 146 | (e ) One 3 pin switch socket outlet point 5 amps on same board with other switches |
| 147 | (f) One 3 pin switch socket outlet point 5 amps on independent board |
| 148 | (g) One light point controlled by two 2-way switches, with cables 1.5 sqmm size |
| 149 | All as per item 140 above but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed. |
| 150 | Supply and fix switch piano flush button single pole oneway 5 amp complete all as specified and as directed. |
| 151 | Supply and fix switch piano flush button single pole two way 5 amp complete all as specified and as directed. |
| 152 | Supply and fix switch socket combination 3 & 2 pin (multi pin) 5 amp flush type complete all as specified and as directed. |
| 153 | Supply and fixsocket outlet multipurpose 3 & 2 pin5 amp flush type complete all as specified and as directed. |
| 154 | Supply and fix switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type complete all as specified and as directed. |
| 155 | Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and as directed. |
| 156 | Supply and fix lamp holder(angle type) PVC body with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-in-Charge. |
| 157 | Supply and fix LED lamp of 9/10 watt all as speciifed and dircted |
| 158 | Supply and fix bell push single phase, 240 Volts, 50 Hz, complete all as specified and as directed by Engineer-In-Charge. |
| 159 | Supply and fixbell Ding Dong 240 Volts 50 Hz complete all as specified and directed by Engr-in-Charge. |
| 160 | Supply and fix fan speed regulator, electronic suitable socket typefor single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed by Engineer-in-Charge |
| 161 | S & F Single pole and neutral metal enclosure with 2 pin and earth plug and socket and top plug complete with 20 Amps MCB SP , 240 Volt all as specifiedand as directd |
| 162 | Taking down serviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site with new clamps, nuts, washers, safety wire of size not less than 1.00mm & bolts including cotter pin for complete all as directed. |
| 163 | Taking down serviceable exhaust fan 300 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades complete and refixing back at site with new clamps, nuts, washers & bolts complete all as directed. |
| 164 | Supply and fix exhaust fan suitable for on working of AC 230 V, 50 HZ 225 mm sweep light duty , with metal body including opening in wall suitable for exhaust fan with fair finishing complete all as specified and as directed. |
| 165 | Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, double door suitable for mounting MCBs including taking down old MCB/DB complete all as specified and directed.Note-: Incoming & outgoing connections from yhe DB shall be provided with proper lugs/ thimbles etc |
| 166 | Supply and fix sheet metal enclosure Loadline distribution vertical DB, MCCB as incomer 4 ways 415 volts, with 200 amps rated bus bar double door suitable for mounting MCCB 100 A TPN as incomer and MCBs as outgoing, Triple pole as incoming complete all as specified and directed including taking down old MCB DBs complete.The Rate shall be included the incomer MCCB TPN of 100 AmpsNote-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc. |
| 167 | Supply and fixMCB single pole240 volts, 6 to 32 amps \"C\" series complete all as specified and as directed by Engineer-in-Charge |
| 168 | Supply and fix single pole and netural 240 Volts 32 amps complete all as specified and as directed by Engineer-in-Charge |
| 169 | Supply and fixing aluminium housing LED Smart bright batten 22 /20 Watt mounted battenfitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours includinglamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. |
| 170 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from fitting to ceiling rose, long life of over 30000 hours etc complete all as specified and as diected. |
| 171 | S&F of 25 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed. |
| 172 | M & L for sub main wiring complete with two runs of 6 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessoriesfixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLSsingle core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of casing caping & one run of earth continuity conductor shall be measured as one running metre. |
| 173 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I |
| 174 | Supply and fix Electric water heater storage type ( Geyser ) of 25 Ltr capacity BEE 5 star rated including inlet and out let connection with hot and cold pipe lines and all accessories etc alll as specified and direcetd |
| 175 | supply & LayXLPEinsulated,heavy duty 1100 volt grade electricarmoured LT UG cable with aluminium conductorof size 25 Sqmm 3.5 Core in trenches/along the wall/including making all connections, saddles, spacers including taking down of old existing LT UG cable, scaffolding if any required for saddling the cable in walls of building of height up to 25 meter, complete with aluminium lugs as required at site and as directed by Engr-in-Charge |
| 176 | Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and 38mm ID confirming to IS 14930 -II and ISI Marked all specified and directed. |
| 177 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/loose Soil |
| 178 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cmsoil / hard dense soil. |
| 179 | Removing excavated material Soft Soil / hard dense soil not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point. |
| 180 | Disconnecting the electric connection ,taking down theexisting Electric Energy meter of any type and size care fully , refix the same incl electric aconnection to the meter at existing / new location all as specified and as directed. |
| 181 | S& F steel water tubeslight grade (ISI marked) galvanised with all fittings supportingfor ceiling fans in ceilings of size 50 mm bore pipe, complete, all as specified and as directed by Engr-in-Charge. |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail