Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-06-2025 | CORRIGENDUM | Other | 10-06-2025 |
| 2 | 03-06-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-06-2025 |
| 3 | 28-05-2025 | CORRIGENDUM SCH OF CREDIT | Other | 03-06-2025 |
| 4 | 28-05-2025 | CORRIGENDUM BOQ | BOQ | 03-06-2025 |
| Sl. No. | Item Description |
| 1 | Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and directed. |
| 2 | M&L for complete removal of existing treatment on old painted surfaces of walls by scrapping andremoving layers of all wall finishes including cleaning, watering to make the surface clean and free from dust, etc including necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 3 | M&L for Rendering (Internal) 15mm thick in cement mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement complete all as specified and directed. |
| 4 | M&L for preparation of surfaces and applying one coat of cement primer suitable for internal walls complete all as specified and directed. |
| 5 | M&L forapplying 1.5mm thick Wall Putty (overall thickness in two coats) over internal plastered surfaces of wall/cement board including Rubbing down with Sand Paper of proper grade to obtain a Smooth Finished Surface complete all as specified and directed. |
| 6 | M&L for applying Two Coats of Acrylic Distemper (as approved), mixed with stainer for achieving the desired shade and applied with rollers on walls/cement boards complete all as specified and directed. |
| 7 | M&L for Rendering 5.0mm thick in cement mortar 1:3 on Concrete Surfaces of Ceilings, Plastered Surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for preparing newly Plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and directed. |
| 9 | M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound(as per manufacturer\"s instructions) on external surfaces ofbrick/stone walls or concrete surfaces finished even and fair upto 4 storey height including necessary scaffloding complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as \"Supply only\". |
| 10 | Supply only Liquid Water Proofing Compound, ISI Marked, as approved, complete all as specified and directed. |
| 11 | M&L for preparation of newly plastered surfaces of external walls and applying a coat of suitable exterior primer, onnew wall surfaces of any description, over 10cm width or girth not otherwise described, upto 4 storey height including necessary scaffloding complete all as specified and directed. |
| 12 | M&L for applying two coats ofexterior acrylicemulsion paint (having anti-dust & anti-algae properties), applied with rollers to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufacturer\"s instructions, upto 4 storey height including necessary scaffloding complete all as specified and directed. |
| 13 | M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, complete all as specified and directed. |
| 14 | M&L preparing newly Rough Cast plastered surfaces of exterior Walls and applying a coat of suitable exterior Primer (as per Manufacturer\"s instructions), complete all as specified and directed. |
| 15 | M&L for applying two coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint (as per Manufacturer\"s instructions), on rough cast plastered surfaces complete all as specified and directed. |
| 16 | M&L preparing old Distempered surfaces of Walls/cement boards including filling the existing Nails/Screw Holes, etc. and applying One Coat of Acrylic Distemper (of approved tint) with rollers complete all as specified and directed. |
| 17 | M&L for preparing old treated/decorated surfaces of walls and applying One Coat of White Wash, complete all as specified and directed. |
| 18 | M&L preparing old Decorated/Treated Plastered surfaces of Exterior Walls upto Four Storey by brooming down or steel wire brushing and scraping down, filling of cracks with suitable pasteand applying with rollers One Coat of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint, applied with rollers to wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufacturer\"s instructions, upto 4 storey height including necessary scaffloding complete all as specified and directed. |
| 19 | -ditto- but with One Coat of Exterior Emulsion Paint (having anti-dust & anti-algae properties) on old Decorated/Treated Rough Cast Plastered surfaces. |
| 20 | M&L preparing old Decorated/Treated Plastered surfaces of Exterior Walls upto Four Storey by brooming down or steel wire brushing and scraping down, filling of cracks with suitable pasteand applying with rollers Two Coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint, applied with rollers to wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufacturer\"s instructions, upto 4 storey height including necessary scaffloding complete all as specified and directed. |
| 21 | M&L for preparing old treated/decorated surfaces of ceilings and applying One Coat of White Wash, complete all as specified and directed. |
| 22 | M&L preparing old Treated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and directed. |
| 23 | M&L preparing old decorated/painted Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (1st quality), complete all as specified and directed. |
| 24 | S&F in repair Non-asbestos Fiber Cement Building Boards 4.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws complete all as specified and directed. |
| 25 | Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., and removal of debris outside AF land complete all as specified and directed. |
| 26 | M&L for Brick Work with Fly-AshBricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and directed. |
| 27 | M&L Brick work using Serviceable Bricks obtained from Item No. 25 here-in-before including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:6, complete all as specified and directed. |
| 28 | Demolition Cement Concrete (Reinforced) of slab, facia, chajjas, sunshade, chullah hoods and similar work (reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside MOD Land, complete all as specified and directed.(NOTE: Reinforcement of the demolished RCC members shall be measured under Sch of Credit. |
| 29 | M&L Reinforced Cement Concrete 1:2:4 type B0 (12.5mm graded stone aggregate) as in Slab supported on walls complete all as specified and directed.(NOTE: MS reinforcement & Formwork shall be measured and paid seperately) |
| 30 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for rough finished surfaces complete all as specified and directed. |
| 31 | M&L TMT Bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hoping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia or securing with Clips, complete all as specified and directed. |
| 32 | Taking down damaged/unserviceable PVC Chowkat or Frame not exc. 1.50 Sqm Each with shutter (without taking off shutter from the frame) and removal from site complete all as specified and directed. |
| 33 | S&F Solid PVC Door Frame of size 50x47 mm made out of 5.0mm thick Plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening, complete all as specified and directed. |
| 34 | M&L for Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heatmoulded plain colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and plain colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either Side and as gap insert for Top Rail & Bottom Rail, Panelling of plain colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and jointed together with Solvent Cement and fixing in the Frame with Stainless Steel Hinges, complete all as specified and directed.NOTE : Hinges will be Measured and Paid under appropriate Item. |
| 35 | S&F Butt hinges, 75 mm long, stainless steel complete all as specified and directed. |
| 36 | S&F Aluminium alloy Handle 125mm long, cast type, anodised, complete all as specified anddirected. |
| 37 | S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 130 Gram), extruded section, complete all as specified and directed. |
| 38 | S&FAluminium alloy, anodized, Sliding Door Bolt 200mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and directed. |
| 39 | Resecuring or easing & adjusting without taking down shutters of any description, area exceeding 1.0 sqm but not exceeding 2.0 sqm each complete all as specified and directed. |
| 40 | Taking down Shutter of any description, area exc 1.00 Sqm and not exc. 2.00 Sqm Each and Refixing in the Same Opening, after resecuring or easing and adjusting, etc., complete all as specified and directed. |
| 41 | Taking down damaged / unserviceable Steel / Wooden Chowkat or Frame exc. 1.50 Sqm but not exc. 4.00 Sqm Each with shutter (without taking off shutter from the frame) and removal from site complete all as specified and directed. |
| 42 | Taking down Shutters of any description exc 1.0 sqm and not exc 2.0 Sqm each and removal from site complete all as specified and directed. |
| 43 | S&FPressed Steel Frame of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates incl necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and directed. |
| 44 | S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates incl necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and directed. |
| 45 | M&L Cement Concrete 1:3:6 type C0 (12.5mm graded stone aggregate) as in Filling Back side of Chowkats, complete all as specified and directed. |
| 46 | M&L for Flush Shutters of 30mm thick, solid core construction with block board core and plywood face panels, cmmercial type on both sides and fitted to Steel Frame, complete all as specified and directed. |
| 47 | M&L Panelled Shutter 35mm thick ofSecond Class Hardwoodwith Panels of 12mm thick Veneered Particle Board medium density wood with commercial face veneered both side and fitted to Chowkats, having size of Rail and Stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 48 | M&L Glazed and Skeleton Shutter 35mm thick of Second Class Hardwoodprepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beeds supplied and fitted to Chowkat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and directed. |
| 49 | S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 130 Gram), extruded section, complete all as specified and directed. |
| 50 | S&F Aluminium alloy Handle 150mm long (weight not less than 90 Gram), cast type, anodised, complete all as specified and directed. |
| 51 | S&F Aluminium alloy, anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and directed. |
| 52 | S&F in repairs Aluminium Barrel Tower Bolt 150mm long (weight not less than 130 Gram), extruded section, complete all as specified and directed. |
| 53 | S&F in repairs Aluminium Barrel Tower Bolt 200 mm long (weight not less than 160 Gram), extruded section, complete all as specified and directed. |
| 54 | S&F in repairs Aluminium alloy Handle 150mm long (weight not less than 90 Gram), cast type, anodised, complete all as specified and directed. |
| 55 | S&F in repairs Aluminium alloy, anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and directed. |
| 56 | S&F in repairs Floor Door Stopper 150mm in size, Aluminum alloy Body and Tongue with Hard Drawn Steel Spring (weight not less than 90 Gram), complete all as specified and directed. |
| 57 | S&F in repairs Door Spring of Mild Steel 150mm long, Ordinary Rat Tail type, Rod pattern Springs including Roller and Roller Plate welding with frame , etc., complete all as specified and directed. |
| 58 | Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frames, glazed with putty or fixed with beads, complete all as specified and directed. |
| 59 | Taking down Steel Window, Ventilator Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, not exc. 1.00 Square Metre Each, complete all as specified and directed. |
| 60 | S&F Steel windows or ventilators, fixed type, with glazing barscomplete all as specified and directed |
| 61 | Taking down Steel Window Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and directed. |
| 62 | S&F Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutters, having Outer Frame of Section 50x25mm and Inner Frame of Section 40x20mm, jointed internally with Mild Steel Flat Iron 40x3mm complete with Stainless Steel Tower Bolts, Hinges, Handles, Stops, Lugs, etc. including Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm, guard bars etc., complete all as specified and directed.NOTE :- (a)For the purpose of Measurement and Payment Double Shutters with Frame shall be considered as ONE UNIT. (b)Unit Rate quoted shall deem to be include all the Stainless Steel Builders & Hardware as required/directed at Site. (c)Quoted Unit Rate shall also deem to be include Mild Steel Guard Bars of 10mm Square Bar, spacing at 10 Cm centre to centre on both Vertical & Horizontal directions.(d)Sheet Glass shall be Measured and Paid for separately under appropriate Item. |
| 63 | S&F Plain Sheet Glass4.0mmthick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and directed. |
| 64 | S&F Frosted Sheet Glass4.0mmthick, Ordinary Type and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and directed. |
| 65 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, etc. and fixed complete all as specified and directed. |
| 66 | M&L for Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and directed. |
| 67 | M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and directed. |
| 68 | M&L preparing new Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and directed. |
| 69 | S&F in repair Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, etc. and fixed-in-repairs, complete all as specified and directed. |
| 70 | S&F in repairs Stainless Steel Curtain Rod 25mm dia/bore (as approved) includingfixing stainless steel Bracket (shaped as approved) not less than 80mm longto wall with Screws/ securedwith stainless steel side domes (as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and directed.(NOTE: Quoted rate shall deemed to include for the cost of brackets and end domes. |
| 71 | S&F in repair 18-19 mm thick PVCBoard Scratch and strain free (weight not less 9 Kg/Sqm) inKitchen Cabinets (shelves, doors etc), one side laminated ,jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including providing & fixing of Stainless steel L shaped hinges suitable for PVCBoard (minimum of 02 Nos for Each leaf ) to hold cabinet door, Stainless Steel Silver chrome DoorHandle 100mm long (01 Nofor each leaf of shutter), complete all as specified and directed.NOTE: Quoted unit Rates are inclusive of PVC board, handles, hinges, screws etc. |
| 72 | M&L for Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water complete all as specified and directed. |
| 73 | Dismantling Floor, Paver Tiles, Hearth or Wall Tiling,etc. including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and directed. |
| 74 | M&L for providingMachine cut Pre-Polished Kota Stone Tiles, 18-20mm thick in Flooring, laid over Screed base and joined with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.NOTE : Cement Screed Bed shall be measured and paid seperately. |
| 75 | -ditto- but for Machine cut Pre-Polished Kota Stone Tiles 12-14 mm thick, in Riser of Steps, Skirting, Dado and Pillars, etc., fixed over backing coat of Cement Mortar and joined with grey Cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.NOTE : Cement Screed Bed shall be measured and paid seperately. |
| 76 | M&L for providingGranite (of any type) Slab, 16-18mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including edge moulding, grinding and polishing, laid over screed bed complete all as specified and directed.NOTE : Cement Screed Bed shall be measured and paid seperately. |
| 77 | -ditto- but for Granite (of any type) Slab, 18-20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.NOTE : Cement Screed Bed shall be measured and paid seperately. |
| 78 | M&L for providing non-skid/matt finish Ceramic tiles, coloured, 7-8 mm thick (Square/rectangular), area of each tile exc 0.18 Sqm but not exceeding 0.38 Sqmin Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles complete all as specified and directed.NOTE : Cement Screed Bed shall be measured and paid seperately. |
| 79 | -ditto- but ceramic tiles of size exc 0.18 Sqm but not exceeding 0.38 Sqm in skirting |
| 80 | M&L for providing non-skid/matt finish Ceramic tiles, coloured, 7-8 mm thick (Square/rectangular), area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqmin Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles complete all as specified and directed.NOTE : Cement Screed Bed shall be measured and paid seperately. |
| 81 | M&L for providing Coloured Glazed Ceramic Tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the Tiles complete all as specified and directed.NOTE : Cement Screed Bed shall be measured and paid seperately. |
| 82 | M&L for providing screed bed for fixing of ceramic floor tiles in cement mortar 1:4, 15mm thick complete all as specified and directed |
| 83 | M&L for providing screed bed for fixing of stone floor tiles in cement mortar 1:4, 20mm thick complete all as specified and directed |
| 84 | M&L for providing screed bed for fixing of ceramic/stone tiles in skirting, etc with cement mortar 1:4, 10mm thick complete all as specified and directed |
| 85 | M&L for providing screed bed for fixing of ceramic/stone tiles in dado, etc with cement mortar 1:3, 10mm thick complete all as specified and directed |
| 86 | S&F in repair angle valve, 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed. |
| 87 | S&F in repair Chromium plated brasstwo way Angle valve, fancy type,concealed type with wall flange fixed to 15 mm bore of Iron pipe, complete all as specified and directed. |
| 88 | S&F in repair PTMT Hand shower (health faucet), ABS body with 1.50 metre long flexible tube with wall hook complete all as specified and directed.(MAKE : PRAYAG, Cat No: 1881 or any other make as approved by GE) |
| 89 | S&F in repair Vitreous China White Squatting Pan of size 580x440mm, \"Orissa\" Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces, complete all as specified and directed. |
| 90 | S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 91 | S&F in repair PVC Connection Pipe 15mm size and 60 Cm in length with Adapter Nuts of PVC, complete all as specified and directed. |
| 92 | S&F in repair Rotational Moulded Polyethene Water Storage Tank, 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position incl re-fixing of tank nipple complete all as specified and directed. |
| 93 | S&F in repairs Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and directed. |
| 94 | S&F in repair Grating 100mm dia in size, Chromium Plated (as approved), complete all as specified and directed. |
| 95 | S&F in repair PVC (SWR) 75 mmfloor trap plain with grating including jointing to waste pipe, fixed in cement concrete 1:2:4 (20 mm graded stone aggregates) complete all as specified and directed. |
| 96 | S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid onfloor, trench etc complete all as specified and directed. |
| 97 | S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid on floors, trench etc complete all as specified and directed. |
| 98 | S&F in repairs PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls with PVC clips, complete all as specified and directed. |
| 99 | S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, fixed to Walls with PVC Clips, complete all as specified and directed. |
| 100 | S&F in repair PVC (SWR) 75mm bore (dia), Bend any type, provided with Access Door, etc. and jointing with Solvent Cement, complete all as specified and directed. |
| 101 | S&F in repair PVC (SWR) 110mm bore (dia), Bend any type, provided with Access Door, etc. and jointing with Solvent Cement, complete all as specified and directed. |
| 102 | S&F in repair 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, with access door complete all as specified and directed. |
| 103 | S&F in repair 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, with access door complete all as specified and directed. |
| 104 | S&F in repair 75 mm bore PVC (SWR) junction single (single T) equal or unequal, with access door complete all as specified and directed. |
| 105 | S&F in repairs 110 mm bore PVC (SWR) junction single (single T) equal or unequal, with access door complete all as specified and directed. |
| 106 | S&F in repair PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed. |
| 107 | S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed |
| 108 | M&L for concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested in cement concrete 1:3:6 , type C2 (using 40 mm graded aggregates) for 110mm OD PVC SWR pipes complete all as specified and directed.(NOTE: Cost of earthwork shall be deemed to be inluded in quoted rate) |
| 109 | Taking up or down Steel Tubing 15mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and directed. |
| 110 | Taking up or down Steel Tubing 20mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and directed. |
| 111 | S&F Chlorinated Polyethylene Chloride (CPVC) pipes 20 mm outside dia, SDR-11, having thermal stability for hot and cold water supply including all SDR-11 CPVC plain and brass threaded fittings (such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connectoretc) fixed / laying walls, ceilings or in floors etc.with suitable size MS clamp of spacing 1.00 mtr etc pipe line complete all as specified and directed. |
| 112 | -ditto- but with 25 mm outer dia size CPVC pipes |
| 113 | S&F in repairs CPVC Ball valve 20mm (outer dia), screwed both Ends for CPVC pipes, complete all as specified and directed. |
| 114 | S&F in repairs CPVC Ball valve 25mm (outer dia), screwed both Ends for CPVC pipes, complete all as specified and directed. |
| 115 | S&F in repair Chromium plated brass Bib cock with wall flange,short body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. |
| 116 | S&F in repair Chromium plated brass Bib cock with wall flange, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. |
| 117 | S&F in repair Chromium plated brass Pillar tap, with aerator, fixed to wash hand basin, complete all as specified and directed. |
| 118 | S&F in repair 15mm bore chromium plated single lever central hole basin mixer without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. |
| 119 | S&F in repair Vitreous China Wash Hand Basin 450x300mm in size, White (Flat Back or Angle Back Type), provided with 32mm dia Brass Chromium Plated Waste Fitting, PVC waste pipe, brackets incl making good disturbed Surfaces in Cement Mortar 1:3 and filling joints with whte cement complete all as specified and directed.(NOTE: Cost of CP wate coupling and PVC waste pipe is deemed to be included in the quoted rates) |
| 120 | S&F in repair Chromium plated brass bodyWall mixer, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe complete all as specified and directed. |
| 121 | S&F in repair chromium plated brass over head shower rose (100 mm dia) with arm , with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed. |
| 122 | S&F in repairs, PTMT towel rail 600 mm complete all as specified and directed. |
| 123 | S&F in repair Mirror 600x450mm in size, Beveled Edge of Selected quality Glass, fixing with Brass Chromium Plated Knobs/Spacers 25mm to 30mm size (One Each in Corner), complete all as specified and directed. |
| 124 | S&F in repair acrylic Shelf (Bath Tray), 600 mm long alongwith all accessories complete all as specified and directed. |
| 125 | S&F in repair acrylic Corner Shelf,of size 30 Cm complete all as specified and directed. |
| 126 | S&F in repair Stainless Steel Plate Rack 75x75x25 Cm in size, made out of Stainless Steel 0.63mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws, complete all as specified and directed. |
| 127 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete complete all as specified and directed. (NOTE: Cost of CP waste coupling and PVC waste pipe is deemed to be included in the quoted rates) |
| 128 | S&F in repair sinks made of stainless steel 1 mm thick in kitchen with plug washers, CP waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 24\" X 18\" X 8\" complete all as specified and directed. (NOTE: Cost of CP waste coupling and PVC waste pipe is deemed to be included in the quoted rates) |
| 129 | S&F in repair 15mm bore chromium plated sink cock, swivel casted spout (wall mounted model) complete all as specified and directed by Engineer-in-charge |
| 130 | S&F inrepairs for waste coupling chromium plated for sink /wash basin, suitable for 32mmdia waste pipe complete all as specified and directed.(NOTE: This item shall only be measured for replacement in existing sinks, basins etc) |
| 131 | S&F in repair PVC Waste Pipe 32mm bore (dia), 60-75 cm length (as required at Site), complete all as specified and directed.(NOTE: This item shall only be measured for replacement in existing sinks, basins etc) |
| 132 | S&F in repair stainless steel peg set of four of best quality complete all as specified and directed. |
| 133 | M&L for built in steel cup board with pressed steel frame of size 75x45x1.25 mm thick with pressed steel shutter 1.00 mm thick (Godrej Pattern) fixed to masonry wall by hold fast made out of 25x3 mm thick flat iron incl MS hanging rod of 10mm dia with bracket fixed on inner side of cup board shutter and on other leaf provision of MS peg set of 03 including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around steel surfaces of frame and shutter including taking down old existing wooden cup board shutters and making good disturbed portion of walls in CM(1:4) or PCC 1:2:4, surfaces finished with 1.5thick wall putty and two coats of acrylic distemper complete all as specified and directed.NOTE: For measurement purpose, only exposed portion from front to be considered. |
| 134 | S&F in repair 19mm thick commercial faced plywood grade BWR type B-B fixed with screws to timber frame work as in cupboard shelves& partitions, pelmet boxes, etc complete all as specified and directed. |
| 135 | M&L for 2nd class harwood beadings,19mm wide & 3-4 mm thick, made to shape and fixed with countersunk screws to the edges of plywood shelves, partitons etc, holes filled with putty and surfaces finished with varnish complete all as specified and directed. |
| 136 | Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and directed. |
| 137 | Demolition Cement Concrete (Reinforced) of Roof, Floor (other than Ground Floor) Beam, Staircase, Landings, Chajjas and similar work (reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside MOD Land, complete all as specified and directed.(NOTE: Reinforcement of the demolished RCC members shall be measured under Sch of Credit. |
| 138 | M&L for Cutting holes into or through brick walls built in cement mortar or cement lime mortar and making good in 1:3 or cement concrete 1:2:4 type B1 as required for superficial area not exceeding 150Sqcm complete all as specified and directed by Engineer-in-charge |
| 139 | S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheetinghaving 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 smallstiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof completeall as specified and directed. |
| 140 | M&L Repairing of broken/damaged portions of Ceilings, upto any height, adhering proper safety precaution and including necessary preparation i.e. scrapping, cutting, chiseling, removing all loose concrete and cleaning exposed reinforcement with wire brush and applying one coat of cement slurry and filling the surfaces with min 15mm thick Cement Concrete 1:1½:3 (12.5mm graded stone aggregate), finished with 5mm thick rendering in cement mortar 1:3 and surfaces finished to match with existing surfaces including finishing with three coats ofwhite wash complete all as specified and directed.NOTES : 1) Site for application is at various locations in patches with varying heights upto 4m. Contractor\"s quoted rate shall deemed to be inclusive of the ibid aspect. NO claim shall be entertained during currency of work.2) Cost of Formwork/Prop, scaffolding, safety gear shallbe deemed to be included in the Quoted Unit Rate. |
| 141 | M&L Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 Litre and not exc. 500 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters \"CLEANED ON DD.MM.YYYY\" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed.NOTE:- The tank should be refixed after cleaning on the same day. |
| 142 | -ditto- but for tanks of capacity exc. 500 Litres and not exc. 1000 Litres |
| 143 | M&L Repairing of broken/damaged portions of RCC Projection, Chajjas, Roofs Facia, Column, etc. upto any height adhering proper safety precaution and including necessary preparation i.e. scrapping, cutting, chiseling, removing all loose concrete and cleaning exposed reinforcement with wire brush, removing all dust & debris, cleaning with water and and applying one coat of cement slurry and filling the surfaces with min 25mm thick Cement Concrete 1:1½:3 (12.5mm graded stone aggregate) duly reinforced witth GI wire netting, surfaces finished to match with existing surfaces including providing a Coat of Chalk Whiting and finishing with Two Coats ofExterior Emulsion Paint over a coat of exterior cement primer with approved Tint as per manufacturer\"s instructions, complete all as specified and directed.NOTES : 1) Site for application is at various locations in patches with varying heights upto 12m. Contractor\"s quoted rate shall deemed to be inclusive of the ibid aspect. NO claim shall be entertained during currency of work.2) Cost of Formwork/Prop, scaffolding, safety gear shallbe deemed to be included in the Quoted Unit Rate.3) Wire netting shall be paid seperately as \"Supply Only\" |
| 144 | Supply only wire netting of stainless steel wire, 1.4mm dia, with mesh size 12mm complete all as specified and directed. |
| 145 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 146 | M&L for Mild steel framed works such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed.(NOTE: Quoted rate shall deemed to include for the cost of all GI anchor bolts & nuts, screws, rawl plugs, etc as required for fixing the grills/MS structure to walls or openings. No claim shall be entertained during currency of work. |
| 147 | M&L Cement Concrete 1:3:6 type C1 (20mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, including making joints 12mm wide upto total depth of concrete at every 3.00 metre interval and every change of direction, complete all as specified and directed. |
| 148 | M&L Cement Concrete 1:4:8 type D2 (40mm graded stone aggregate), 75mm thick, as in sub base of floor, path, hardstanding etc complete all as specified and directed. |
| 149 | M&L Cement Concrete 1:3:6 type C2 (40mm graded stone aggregate), 75mm thick, as in sub base of floor, path, hardstanding etc complete all as specified and directed. |
| 150 | M&L for providing cement concrete coloured chequered tiles 300x300x22-25mm thick, set, jointed and pointed in neat cement slurry in floors, with grey cement and pigment complete all as specified & directed.NOTE : Cement Screed Bed shall be measured and paid seperately. |
| 151 | M&L for providing outdoor ceramic Floor (Paver) Tiles, 300 x 300 x 9.0 to 10mm thick, highly abrasive, Anti-skid, Impact Resistant, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.NOTE : Cement Screed Bed shall be measured and paid seperately. |
| 152 | M&L for Cement Concrete 1:2:4 type B1 (20mm graded stone aggregate) as in Coping, Bed Plates, Holdfast, Bed Block, Kerb Stonesincluding necessary Formwork and weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 153 | M&L for Cement Concrete 1:3:6 type C1 (20mm graded stone aggregate) as in saucer drainsincluding necessary Formwork and surfaces finished with neat cement slurry complete all as specified and as directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
