Tender For Spl Repair To Bldg Nop-4/13 Atmilitary Station Pithoragarh Under Ge Pithoragarh.; 1 S&F in repairs Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified 2 S&F in repairsPre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self 3 Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed and deposited to MES stores 4 M&L Plates (plain or chequered) channels Fe 410-W (Gde E-250) quality B. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. 5 S & F mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates all as spd and directed 6 Dismantling boarding, any description, fixed in any position with nails all as spd and directed 7 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles semi perforated12 mm thick micro tegular edged GRG false ceilling tiles ofSize 595 x 595 mm of approved texture, design and patterns having moisturecontent less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS false 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross of size 15x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module ofsize 600x 600mm, suspended from ceiling using galvanized mild steel items(galvanizing @ 80 grams per sqm) i.e50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mmto be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specifications, drawingand as per directions of the Engineer-inCharge. 8 M & L, non skid joint free coloured ceramictiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match and including Dismantling of existingfloor ,hearth or wall tiling complete all as specified and directed 9 S&F coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendring in CM 1:4 andincluding Dismantling of existingfloor ,hearth or wall tiling complete all as specified and as directed. 10 S&F non-skid ceramic coloured tiles light shade 7 to 8mm thick area of each tile exceeding 0.06 Sqm but n exc 0.11 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 including dismantaling of existing tile complete all as specified and as directed. 11 Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed. 12 Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil). 13 Removing excavated material (soils) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed. 14 M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. 15 M&L RCC nominal mix type 1:1.5:3(20 mm graded aggregate)as in beams/cantilever/lintels/column/ etc complete all as specified and as directed. 16 M&L form work to soffits and sides of suspended slabs/chajja/beam/cantiliver/columnand similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat all as specified. 17 M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia or securing with clips all as specified. 18 Same as item no 17 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders 19 Repair of Chajjas by completly removing old broken plasters or pieces of concrete and dubbing out with cement mortar 1:4 or by cement concrete 1:2:4 (12.5 mm graded aggregate) incl necessary formworks and finally finishing the surface smooth and even w/o using extra cement and applying two coats of cement based paint complete (plan area of chajjas to be measured) 20 Demolition of cement concrete of any description and in any position not otherwise specifically provided for. 21 M&L25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor /roof surface finished rough and even to receive tiles complete all as specified 22 M&L for 75 mm thick PCC 1:2:4 type B-2, (using 40mm graded stone aggregateas insubbasefinished rough to recive other surfacing material complete all as specifiedand directed by engineer in charge . 23 M&L for PCC 1:3:6 type C-2, (using 40mmgraded stone aggregate) as in plinth protection laid in alternate panels75mm thick finished even and smooth w/o using extra cement. 24 Forming construction joints 30mm deep x 10mm wide filled with sealing compound grade A 25 M&L precast cement concrete Block Masonary with solid blocks type C1 1:3:620mm graded stone aggregate exc 10 cm in width, 25 cm in width, 15cm in height and setting in mortar 1:6 incl Demolition of Precast concrete block wallingbuilt in cement mortar complete all as specified and directed . 26 M&L PCC 1:2:4 type B1 (20mm graded aggregates) as coping, bed block, Haunching/ benching of drains/coving/ sides ofany type of tiles etc and similar work 27 M & Lfor PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain complete all as specified and directed. 28 Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. 29 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc. 30 M & L 15 mm thick cement plasteron fair faces of brick work or concrete surface on wall in CM 1:4finished fair and even complete all as specified and directed. 31 M & L 15mm thick cement plasteron fair faces of brick work or concrete surface on wall in CM 1:6finished fair and even complete includingall as specified and directed. 32 Granite (of any type) work (table rubbed and polished) 16-18 mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed of CM (1:6)including demolition of existing stone slab complte all as specified and as directed including demolition of existing stone slab 33 Taking down chowkats or frames exc. 1.5 but n.exc 4m2 each with shutters (W/o taking off shutters from the frame) and removal to store. 34 Taking down chowkats or frames nt exc. 1.5 m2 each with shutters (W/o taking off shutters from the frame) and removal to store. 35 S&F, solid WPC door frame of size 63mm x 50 mmwith decorative laminatesin opening of Cup Board as per specificationcomplete all as specified and directed by Engr-in-charge. 36 S&F 18 mm thick factory made solid PVC flush Kitchen CB shutter /shutter ,uPVC ,made from co-extruded three layer rigid foam sheet (single extruded process ) with 0.8 to 1mm thick outer face layer having density not less than 1400 kg /cum and density of central core material not less 600 kg/cum , manufactured by an ISO 9001:2015 certified company and fixing in frame at site with and including 03 nos S S hings, 02 Nos S S fancy handle ,02 Nos S S tower bolt, Ball catches with 8mm dai steel ball and brass body and striding plate including lettingand inbuilt lockin divice with Key etc for Cup Board / Kitchen cabinets as per specification & drawing complete all as specified and directed Engr-in-charge. 37 S&F in repairs 20 mm dia fancy type SSCurtain rod fixed with SS bracket and lattooto wall complete as sample approved all as specified and directed by Engr - in - charge. 38 M & L Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified. 39 M&L for applyingtwo coat exterior emulsion paint (weather coatof Berger or equivelent) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed.. 40 M&L for complete removal of existing treatment using mechincal device and applyingtwo coat exterior emulsion paint (weather coatof Berger or equivelent ) on old plastered wall with airless electric sprayers after prepearing old surface applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed.. 41 M&L for applyingtwo coat OBD on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed. 42 M&L for complete removal of existing treatment using mechincal device and applying oftwo coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed 43 M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as inmanhole cover, shelves, chajjas etc andset in CM 1:6 complete all as specified and directed. 44 S&F in repairs 25 mm thick boarding of 2nd class hardwood as in roof facia ,Planed one side, with butt joints and fixed with nails supplied and fixed complete all as specified and as directed 45 S&F non skid tiles, exterior grade, chequered/grooved pattern of size 300x300mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed. 46 S&F anodized aluminium door & frame powder coating (minimum thickness of powder coating 50 micron) 2 mm thick incl 5.50mm thick tinted glass, fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No floor spring for each shutter complete all as specified and directed with following specifications :-(a) Aluminium door frame =101.50x44.45mm(b) Aluminium style/top & middle rails of shutter=83.5x44.45mm(c ) Aluminium bottom rail of shutter=114.50x44.45mm(d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed. 47 S&F in repairs door seal of aluminium powder coated with cotton mat of length 90 cm to 100 cm long complete all as specified and directed. 48 S&F sheet glass 5.5 mm thick ordinary qualityand glazing with oil putty in squaren.exc 0.5 sqm in each pane complete all as specified 49 Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottomand sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief. 50 Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing and making good , cutting nexc 10 cm girthcomplete all as specified and directed. 51 S&F 15mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete. 52 S&F20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floorincluding taking down complete all as specified and directed. 53 S&F15 mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete. 54 S&F20 mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete. 55 S&F 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed. 56 M&L for 5 mm thick Looking mirror with moulded edgesof any size mounted on wall with the help of stainless steel brackets 57 S&FBrass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between flanges complete all as specified and directed. 58 S & F in repairs vitreous china wall mounted wash down water closet with builtin flushing cistern and closet seat cover including all necessary fittings and making good to wall surfaces complete all as specified and as directed. 59 S&F in repairs Brass chromium plated Tubular towel rack having size 450mm complete all as specified and directed. 60 S & F in repairsToilet paper holder with flap guard type of stainless steel Complete all asspecified and directed. 61 S & F in repairssoap dish of stainless steel Complete all asspecified and directed. 62 S& F in repairs CP BRASS SINGLE LEVER BASIN MIXER WITH 300mm EXTENDED BODY AND 600 mm BRAIDED CONNECTION pipe for mixing hot & cold water screwed downfor iron pipe and fixed complete all as specified and directed 63 S&F in repairs Two way bib taps cast copper alloychromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe. 64 S&Fin repairs C P Hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC,all as specified and directed. 65 S&F 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed. 66 S&F 20 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed. 67 S & F in repairs Table top vitreous china hand wash basin of shape as decided by engineer in charge snow white exclusive quality,incl waste pipe and waste coupling complete all as specified and directed. 68 S&F in repairs 600mm long PVC Connection 15mm size with PTMT nutscomplete all as specified and directed. 69 S&F IN REPAIRS corner glass shelf assembly of 3, having sizes 300 X 300, 225 X 225 and 150 X 150 consisting of 5.5mm thick glass sheetwith aluminium alloy brackets andguardcomplete all as specified. 70 S&F PVC (SWR) floor trap with CP grating including jointing to waste pipe 75 mm bore outlet with solvent cement all as specified. 71 S&F PVC (SWR) bends 75 mm bore with or with out oval excess door complete all asspecified and as directed 72 S&F PVC (SWR) bends 110 mm bore with or with out oval excess door complete all asspecified and as directed 73 S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete 74 S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete 75 S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed laid in trenches or in floors etc complete 76 Supply & Fix 1000 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position including dismantling of existing water tanks complete all as specified and directed.
