|
| 1 | Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, modular switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.(S.I. No. 138 C + 187 A) |
| 2 | Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, modular type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash. (S.I. No. 140 C + 187 A) |
| 3 | Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and modular type switches & socket etc., complete in all respects as directed, including matching color wash. (S.I. No. 141 C + 187 C) |
| 4 | Supply and fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED Tube Light fitting including tube on surface complete in all respect. CAT.AAA (S.I. No. 23.07) for 3 Year Warranty |
| 5 | Supply and fixing of water tight oblong 10 watt LEDbulkhead luminarie with driver set confirming to IP 65 and above protection. Complete in all respect. CAT.AA (S.I. No. 23.11) for 3 Year Warranty |
| 6 | Supply and fixing of LED Street Light Fitting having die cast Aluminium body and diffuser with driver set suitable for 110 to 130 watt. Confirming to IP 65 and above protection complete in all respect. CAT.AAA (S.I. No. 1424) |
| 7 | Supply and fixing of power plug with 20A/250 volt flush type modular switch and 5 pin 20A/250V flush type universal modular socket switch on concealed M.S. box includingsupply of all material, labour T&P etc. required for proper completion of work.(S.I. No. 1139 A) |
| 8 | Supply and wiring of sub main with 2 Nos 2.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy gauge rigid steel conduit in wall with 1 No. 14 SWG copper earth continuity wire including matching colour wash etc., complete in all respects. (S.I. No. 1307 C) |
| 9 | Supply and wiring of sub main with 2 Nos 4.0 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy gauge rigid steel conduit in wall with 1 No. 14 SWG copper earth continuity wire including matching colour wash etc., complete in all respects. (S.I. No. 216 C) |
| 10 | S/F of 6-32 Amp. MCB (10KA) CAT.A (S.I. No. 1002) |
| 11 | S/F of 6-32 Amp. DPMCB (10KA) CAT.A (S.I. No. 1009) |
| 12 | S/F of 63 Amp. DPMCB (10KA) CAT.A (S.I. No. 1011) |
| 13 | S/f of 63 Amp metal clad TPN type switch fuse unit complete with rewirable type fuse on angle iron bracket complete in all respects CAT.B (S.I. No. 316 ) |
| 14 | S/f surface/flush mounting 8 ways SPN distribution board with additional metal door without MCB complete in all respect and as directed at site. CAT.B (S.I. No. 1024 A) |
| 15 | S/F of sheet steel enclosure surface/flush mounting fitted with 20 Amp. 2 pin and earth metal clad scraping earth plug and socket complete in all respect as directed at site by E/C CAT.B(S.I. No. 1031) |
| 16 | S/F of Hexagonal Fan Box complete in all respects (SI No. 1149 ) |
| 17 | Supply and fixing of electronic fan regulator 120-280 V ISI marked, on the existing switch board including making connections, required material, labour T&P etc for proper completion of work to the satisfaction of E/C of work (S.I. No. 1203 C) |
| 18 | Supply of Ceiling Fan with fan motor of AC Permanent insulation capacitor rating confirming BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment. The rated voltage 220/240 volts, 50 Hz, 1 ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system (ii) BEE 4 star rated- 1200 mm sweep (S.I. No. 1501 (i) ) |
| 19 | S/F of single pole MB blanking plate CAT.B(S.I. No. 1034 B) |
| 20 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fitting includind trenching (75 cm deep) and re-filling etc as required.50 mm dia (S.I. No. Civil DSR 18.12.6) |
| 21 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fitting includind trenching (75 cm deep) and re-filling etc as required.100 mm dia (S.I. No. DSR 14.13.3) |
| 22 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.SI No.725(A) |
| 23 | Supply and fixing of one number 8 SWG G.I. wire in 15 mm. dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.(S.I. No. 721) |
| 24 | Supply and fixing of recess/surface mounting round 18 Watt to 20 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink diffuser/reflector and driver set complete in all respects.CAT.AAA (S.I. No. 23.03) for 3 Year Warranty |
| 25 | Supply and laying of aluminium conductor PVC insulated armored served sheathed cables 1100 Volts grade at depth of 750 mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the Engineer-In-charge, complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc.(a) 6 sq. mm 2 core (S.I. No. 20 a.1.1) |
| 26 | (b) 16 sq. mm 2 core (S.I. No. 20 a.1.1) |
| 27 | (b) 25 sq. mm 31/2 core (S.I. No. 20 a.1.10) |
