Annual contract agreement work in Pachpahar Municipal Area - Earth Work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus materials with all lift and lead upto 1000m as per MORT&H specifications clause 30.1 in all type of soil Earth work in excavations in foundations, trenches, etc. Including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/foundation and disposal of surplus excavated material at alead up to 50m suitable site as per direction of Engineer for following depths. below natural ground / Road top level. Depth upto 1.5m Carriage of materials by mechanical transport including loading, unloading and stacking. Earth Up to 1km Earth filling with available surplus soil excavated from foundations and taken onlynfrom outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watoring and consolidation with lead up to 50m and lift.opto 1.5km Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth leve 1:4:8 (1Cement Afine/coarse sand: 8 Graded Stone aggregate 40mm nominal size Providing and leying in position cement.concrete specified grade excluding the cost of centering and shuttering-all work up to plinth leve 1:1.5:3 (1Cement:1.5fine/coarse sand: 3Graded Stone aggregate 20mm nominal size Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work up to plinth leve 1:15:3 (1Cement 11.5tine/coarse sand: 3Graded Stone aggregate 20mm nominal size Reinforcement for RCC Work at all levels including straightiming, cutting, bending. placing, in position and binding all complete. Thermo Mechanically Treated Bars Random Rubble Masonary with hard stone in foundation and plinth. Cement Mortar 16 (1Cement: 5 Coarse sand) Extra for random Rubble masonary with hard stone in super structure above plinth level and up to two stories Brick Work with FPS bricks of class designation 75 in foundation and plinth. Cerment mortar 1:6 (1 cement: 6 Coarse sand) Brick Work with FPS bricks of class designation 75 in super structure above plinth level up to two stories in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 Coarse sand) Half Brick masonary with FPS brick of class designation 75 in foundations and plinch in cement mortar 1:3 (1Cement: 3 Coarse sand) Hall Brick masenary with FPS Brick of class designation 75 in superstructure above plinth level up to two stories in cement mortar 1:4 1Cement 4 Coarse sand) S Cervent Plastering including T&P, scaffolding, material, and complete labour including cost of water, curing, racking of joints etc. with 20 mm coment plaster of mix 1:6 (1 cement:6 line /coarse sand) Cement Plastering including T&P, scaffolding material, and complete labour including cost of water, caring, racking, of joints etc. with 12mm cement plaster of mix 1:4 (1 cement of fine /coarse sand) Cement Concrete Flooring 1:2:4 (1Coment 2 Coane sand: 4 graded 20mm nominal size aggregate finished coat of neat rement including cement slurry, but excluding the cost pf nosing of steps etc. complete. 40mm thick 1 Providing and fixing stone jali 40mm thick throughout in cemnt mortar 1:3 11 Cement: 33 Gparse sand) including pointing in white centent mortar 1:2 (1 Cement: 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers ete. Fied Sand Stone 4 Providing and fixing T-iron Frames for doors, windows and ventilators of mild steel Tee sections, joints mitered and welded with 15*2 mm lugs 10cm long embeeded in cement concrete blocks 15*10*10 cm of 1:3:6 (1Cement 3 Coarse sand 15 graded stone aggregate nominal size 20mm or with wooden plugs and Provinding and fixing in position collapsible steel shutters with vertical channels 20 102 mm and braced with flat iron diagiannis 20°5mm size with top and bottom rail of T iron 40*40*6 mm with 40mm dia steel pulicys complete with balts, nuts, locking arrangement stoppers handles Including applying of primer coast of approved steel primer providing and fixing 1mm thick MS sheet done with frame of 40*40*6 angle iron and 3mm MS gusset plates at the junctions and corners all necessary littings complete including applying a priming coat of approved steel primer Providing and fixing stone slab covering of required size over grains including filling of joints with cement sand mortar 1:3 complete as per direction of Engineer in charge. Average thickness 60 to 75 cm 40mm thick fine dressed stone floering aver 20mm (average) Thick base of cement mortar 1.5 (1cement 5 coarse sand) with joints finished flush Red sand stone White sand Stone Grading roof for water proofing treatment with cument concrete 1:2:4 1Cement 2 Coarse sand graded stone aggregate 20mm nominal size Providing and fixing water closset squatting Partn indian type W.C.) with 100mm sand cast iron P or Strap, 10 litre low level white P.V.C. Ilushing mstern with manually controlled device with conftiming 5:7231, with all fittings and fixares complete including cutting and making good the walls and floors wherever required, white Vitreous China Orissa Pattern W.C. pan of size 5801440mm with integral type foot rests. Providing And fixing vitreous china dual purpose oset suitable for use as squatting or European type water closet (Anglo indian W.C. Pan) with seat lid with C.P. brass hinges and rubber buffers 10litre low level flashing cistern with fitting and brackets, 40mm lush bend 20min over flow pipe wih specials of standard make and mosquito proof coupling of approved muncipal design complete including painting of littings and brackets cutting and making good the walls and floors wherever required. White Vitreous Chinn Dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and CP. flush bend. Proving and fixing white vitreous china squatting olate urinal with integral rin longituenal flush pipe Providing and Fixing Wash Basin with C.L Brackets 15mm CP. brass pillar taps 32mm C.P. brass waste of standard pattern including painting of fittings and brackets cuttings and making good the walls wherever required White vitreous China Wash Basin size 630*450 mm with a pair of 15mm C.P. brass pillar taps. Providing lowering laying in trenches,aligning living in position and jointing uPVC Pipe fittings/accessries of class III (GKg/SQM suitable for potable water with rubber ring joints (as pperis 4985 2000) of following outer dis with all accessies (excluding) complete including all material fabour, hydraulic testing and commisioning as per Technical Specifications and as perndirection of Engineer. 110 mm dia. Providing and laying Reinforced Cement Concrete pipe NP4/prestressed coricrete pipe for culverts including jointing ends and fixing collar with cement mortar 1:2 complete as per Llause 100082900. of MORT&H Specifications including all maternal labour form wook machinery 300mm internal diameter. Providing and laying Reinforced Cement Concrete pipe NP4/prestrossed concrete pipe for culverts induding jointing ends and fixing collar with cement martar 1:2 complete as per clause 100082900 of MORT&H Specifications including all material labour form woek machinery 600 mm internal diameter. Providing and laving Reinforced Cement Concrete pipe NP4/ prestressed concrete pipe for culverts including jointing ends and lixing collar with cement mortar 1:2 complete as per clause 1000&2900 of MORT&11 Specifications Inchuding all material labour form woek machinery 500 mm internal diameter Providing and laying Reinforced Cement Concrete pipe NP4/prestressed concrete pipe for culverts including jointing ends and fixing collar with cement mortar 1:2 complete as per clause 1000%2900 of MORT&H Specifications including all material labour form woek machinery 1200 mm internal diameter Providing and fixing precast coment concrete M-20 grace (using Mechanical concrete mixer) kurb stone top and bottom width 115 and 165mm respectively. 250mm high on 150mm thick PCC MGO wave fourdations as per design, including lixing at site as per dause 408 of MORT&H specification including all material labour machinery lighting, guarding and maintenance of diversion. Dismaatsling of Existing structure like culverts bridges, retaining walls, ce road and other structure comprising of masonary, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismentled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50mere as direction by engineer. Rubble stone masonary in cement Mortar Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing, in position and applying a priming coat of approved steel primer all complete Providing and Fixing 3.5. Sheet roofing including vertical/curved surface fixed with polymer coated I or L hooks, bolts and nuts 8mm diameter with bitumen and G.1. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets 1.00mm thick with zinc coating not less than 275gm/m2. Providing and Foxing UV stablised fibreglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated Jor Lhooks, bolts, & nuts 8mm .cia. 2mm thick.corrugated (2.5014.2 or 6) or step down (2 oг 3 от 6) as specified. Kota stone slab flooring 25mm thick over 20mm (average) Thick bate laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortor 14 (Cement: 4 coarse sand 1 Area of each slan 900 to 2000sqcm, Distampering of Oil Bound washable distemper of approved brand and manufacturer to given an even shade. New Work (two or more coats) over and including priming Coat with Cement primer Finishing walls with water proofing cement paint of required shade. New Work (Two or more coats applied @3.84Kg/10t0cm) white washing with lime to give an even shade New work (three or More Coats) Painting with aluminium paint of approved branti and manufacture to give an even shade Two or more coats on new work Providing and fixing aluminium work for doors. windows, ventilators and partitions with extruded built up standard tubular sections appropriate Z sections and other sections of approved make confirming to 5: 733 and 15 1285, fixed with Rawl plug and screws or with lising dips or with expansion hold fastenere, for fixed portion Anodised Aluminium anodises transporent or dyed to required shade according to 15:1865 Minimum anadi coating of grade AC 15 Anodised aluminium (anodised anodised transparent or dyed to required shade according to 15:1668 Minimuns anodic coating of grade AC 15 Providing and fixing glazing in aluminium door. window, ventilator shutters and partitions etc. with PVC neoprene gasket ate, complete as per the architectural drawings and the direction of engineer in charge with float glass panes of 5.50mm thickness. Providing and placing on terrace (at all floor w polyethelone water storage tank S 12701 marked with cover and cuitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Providing and laying spreading and compacting of granular sub-base by providing close graded Moval (table 400-1) spreading in uniform lavers with motar grader on prepared surface, mixing, by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORT&H specification clause-401 including all aurial, labour, machinery, lighting, guarding. and maintenanace of diversion, Grading || material Providing, laying, spreading (with Paver finisher only 1 and compacting wet mic macadam (WMM) base course comprising of graded stone aggregates and granular material confirming to MORT&H specifications (table-400-11) in layers of equal compacted thickness each consolidated as per MORT&H Specifications dause 40G including all amterial, labour machinery, lighting, guarding, and maintenance of diversion Providing and lavine marking of center line and step Iine etc, with not thermoplastic compound 2.5mm thick on road/plain surface including reflectorising glass beads @250gms per sqm area with special applicator machine as per IRC 35including cleaning the surface of all dirt, dust and other foreign matter demarcation at site and traffic control involved. The finished surface to he level uniform and free from streaks and holes as per clause 803 of MORT&H specification including all material, labour machinery, lighting, guarding and maintenance of diversion supplying and Fixing of G.1. Chain Link fencing of required width in mesh including straightenning with 2 mm dia Gwire/Gl Staples/GIU nails/nuts bolts anle iron posts 50mm*50*6nim placed every 3 metre center to center founded in M15 grade cement concrete 30cm*30cm 60cm, 0.5 meter below ground Providing and lixing 1.2 metre high Gl barbed wire fencing with 1.8 m angle iron posts 40mm*40mm*6mm placed every 3 m centre to centre founded in M15 grade coment concrete, 0.6 meter below ground level every 15 th post last but one end past. As per MORT&H Specifications & type A as per 15:278: 1978 size designacion 5 (line wire 2.24 point wire 2.00mm mass 97-106g/m) including all material labour anodised aluminium (anodised anodised transparen, or dyed to required shade according to 15:1858. Minimum anodic coating of grade AC 15 Choured terrazo tiles 22mm thick with graded marble chips of size up to 6run in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20mm thick bed of cement morter 1:4 (1cement 4 coarse sand
