|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqmeach |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sqm each |
| 3 | Takingdown old aluminium partition / windows / doors of any description including frames and all fittings etcof any size complete all as specified and directed. |
| 4 | Demolition of cement concrete (reinforced) of any description in any position not otherwise specially provided forcomplete all as specified |
| 5 | Demolition of cement concrete(unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above G.L) and rubbish off the premise complete all as specified and directed |
| 6 | Demolition of brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified |
| 7 | Dismantling of Plain or corrugated Asbestos cement/polycarbonate, translucent (corrugated, semicorrugated, plain,etc) sheets in roof coverings |
| 8 | Complete removal of existing unserviceable water proofing treatment including PCC tiles (except PCC padding) but includingcement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises out side MD land. |
| 9 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid and bedded on pointed on any mortar complete all as specified and directed. |
| 10 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premise complete all as specified and directed |
| 11 | Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , hacking for key scrubbing with water etc complete all as specified and directed |
| 12 | Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removal to store all as directed. |
| 13 | Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removal to store all as directed. |
| 14 | Dismantling PVC water tanks of capacity exc. 250 but n. exc. 500 litre capacity complete all as specified and as directed. |
| 15 | M&L ATT for soil under existing floors using @ 1 ltr per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L PCC 1:3:6Type C-2, using 40mm graded aggregate as in flooring , hard standing / Path and similar works finished fair and even to surfaces |
| 17 | M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, and the like including weathering, slightly rounded or chamfered angles and throating as directed. |
| 18 | M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in levelling coursefor maintain slope over on existing roof surfaces complete all as specified anddirected. |
| 19 | Supply only liquidwater proofing compound |
| 20 | M&L Brick work with sub class B bricks, straight or curved on plan to any radius built in half brick thick walls in CM 1:4 all as specified. |
| 21 | M&L Brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 22 | S&F SolidPVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube complete all as specified |
| 23 | S&F Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel designed with 2 mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification complete all as specified |
| 24 | M&L 30 mm thick 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass gauze etc(with sash bar) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I complete all as specified |
| 25 | M&L 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated complete all as specified |
| 26 | M&L Aluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm, bottom size 92x31.75x1.50 mm and shutter top & bottom of size 40x18x1.50 mm and sides (handle) of size 40x18x1.50 mm and lock side shutter frame of size 40x18x1.50 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4 mm thick glass with necessary rubber beading gasket etc, one wire mesh shutter and two Nos glass shutter as per drawing No CEAA/STD/01/2010 sheet No 1/1 complete all as specified anddirected |
| 27 | S&F Aluminium ventilator powder coated (required colour to match window colour), louvers type, frame top & bottom of size 31x42x1.50 mm (rectangular tub of size 40x20x2mm (and middle vertical of size 42x46.20x1.50 mm section and clip for fixing wire mesh and glass of size 19x17.30x0.90 mm thick includingprovision of one guaged shutter with stainless steel wire cloth 0.36mm nominal dia of wire and 1.40 mm average width of aperture and fixed with stainless steel wire staples and4 mm thick glass louvers with blades of 100mmwithheavy duty rubber beading, gasket etc complete all as specified |
| 28 | M&L Aluminium powder coated (required colour to match window colour) grill of 5 mm thick DG-102 as per Drawing No CEAA/TD-144 sheet No 1/1 fixed with H or F channel of décor or equivalent complete all as specified |
| 29 | S&F 100mm long medium weight cold rolled mild steel hinges to frame with screwed or welding complete all as specified and directed. |
| 30 | S&F 100 mm long SS butt hinges and fixed to frame with screwed or weldingcomplete all as specified.. |
| 31 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified... |
| 32 | S&F Aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruded section or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified |
| 33 | S&F 150mm longextruded aluminium alloy handles, fabricated type, anodisedcomplete all as specified.. |
| 34 | S&F 150mm long floor door stopper of aluminium body and tongue, with hard drawn steel spring, fixed to bottom of door shutter complete all as specified.. |
| 35 | S&F CP peg set of four fixed to wooden boards/shutters complete all as specified |
| 36 | S&F 25 mm dia stainless steel drapery rod with and including two Nos of bracket/holders suitable for drapery 25 mm dia rods of one window / door openings complete as in repairs all as specified |
| 37 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with aluminium wire staples or teak wood beading for wooden doors etc |
| 38 | S&F 300mm mild steel ordinary rat rail/helical spring including roller, roller plate complete with provision of fixing in wooden, welded to pressed steel or angle iron frame complete all as specified . |
| 39 | S&F Wire netting 1.23mm dia and size of mesh 20mm of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified |
| 40 | M&L Aluminium partition made with aluminium anodised section 62.30 x 44.45 x 1.50 mm fixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5mm thick glass (black/tinted/plain) and all necessary fittings complete as in partition all as specified and as directed. |
| 41 | S&FMS framed works as in purlin, rafters, column square / rectangular, round or angle section, fixed with and including iron cleats or other connected plates flat iron wind ties etc including bending of MS section as requiredsuch as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 42 | S&F Hard drawn steel wire fabric cut to length bent to shape required and tyingwith and including mild steel wire annealed not less than 0.90mm in dia n,exc 4 kg per sqm complete all as specified and as directed. |
| 43 | M&L Framed work as in door frames or gates chowkhats of angle or other section with braces, etc, drilled or welded for MS hinges for fixing of gate or doors other covering and also fastening and fixing complete all as specified |
| 44 | M&L Anodised aluminium snap grid frame with 60cm x60cmfor false ceiling including 12mm thick perforated particle board/tiles for insulation and acoustic purposes, fixed with nails to timber framework or with staples on snap grid complete all as specified. |
| 45 | M&L 2mm thick fibre glass reinforced translucent corrugated / plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all asspecified and as directed by Engineer-in-Charge |
| 46 | M&L Pre- painted. Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified |
| 47 | M&L Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified |
| 48 | M&L False ceiling with semi perforated 12 mm thick micro regular edged GRG at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and patterns having moisture content less than 2% , humidity resistance of 99% , NRCO.50 to 0.75 as per IS 8225:1987 , Non-combustible as per BS 476 (part-4) - 1970 and light reflectance of 85% (minimum) to be laid in truehorizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross-T of size 15x32 mm of length 1200mm and secondary intermediatecross-Tof size 15x32 mm of length 600mm to form grid module of size 600x600 mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 gms per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rodupto 1000mm length and L-shape level adjusterof size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on periphery wall/ partition withthe help of plastic raw plugs at 450 mm centre to centre and40mm long dry wall wood screws. the work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 49 | M&L Preparing clean and dried plastered surface and applying a coat of oil basedbitumen primer conforming to IS 3384-1986 @ 0.30 litrs/sqmand laying APP polymer modified membrane 3.5mm thick with non-woven polyester reinforced membrane (min 3.50 kg/sqm) having thermal insulation with white mineral gravel finish on upper side of membrane and laid by torch application method to the entire surface all as specified and directed |
| 50 | M&L 25 mm thick PCC 1:2:4 type B1 using 20mm graded aggregate as in levelling course complete all as specified and directed. |
| 51 | M&L75 mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate as in sub base complete all as specified |
| 52 | M&L 75mm thick cement concrete type C-2 1:3:6 using 40 mm graded aggregate as in plinth protection and finishing cement concrete surface even and smooth without using extra cementincluding provide construction of joint in every 2 mtr to and filled with saw dust complete all as specified and directed |
| 53 | M&L Rubber moulded Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-40 Grade over25mm thicksand cushion complete all as specified |
| 54 | M&L Granite work (of any type) 20 mm thick (table rubbed and polished) in steps, risers, door jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 10mm thick CM 1:4 completeall as specified |
| 55 | Rounding/ moulding to edges of stone slabs one/ all edge, such as in steps, cooking platform, and other similar situations all as specified and directed. |
| 56 | M&L Makrana dongri adanga 20mm thick marble tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry including cutting and polishing etc and including 15mm thick backing coat in CM 1:4all as specified and directed by Engr-in-Charge. |
| 57 | M&L Vitrified ceramic (dark shade /double charged / ultra charged) tiles 10 mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and n exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with screed bed 15mm thick in CM 1:4 complete all as specified and directed. |
| 58 | M&L Vitrified dura stone parking tiles 10 mm thickarea of each tiles n exc 0.36 sqm with grey cement and pigment, set, jointed and pointed in white or coloured cement to match the shade of tiles over and including set and jointed in neat cement slurry and pointed in white or coloured cement to match, with screed bed 15mm thick in CM 1:4. complete all as specified and directed |
| 59 | M&L Non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/ Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed with 15mm thick in CM 1:4 complete all as specified. |
| 60 | M&L Non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/ Rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm, in as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover10mm thick backing coat in CM 1:4 complete all as specified. |
| 61 | M&L Non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/ Rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed with 15mm thick in CM 1:4 complete all as specified. |
| 62 | M&L Glazed ceramic coloured digital tiles 450x300mm x 7mm thick invertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM 1:4 complete all as specified. |
| 63 | M&L 15mm thick renderingon fair faces of concrete or brick masonry surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed |
| 64 | M&L 15mm thick renderingin two layers onconcrete or brick masonry surfaces, ,first layer with10 mm thickin CM 1:6and second layer with5 mm thick in CM 1:4 mixed wth WPC at the rate of 3% by weight of cementfinished even and smooth without using extra cementin wallcomplete all as specified and directed |
| 65 | M&L 25mm thick renderingin two layers onconcrete or brick masonry surfaces, ,first layer with15 mm thickin CM 1:4and second layer with10 mm thick in CM 1:4finished even and smooth without using extra cementin wallcomplete all as specified and directed |
| 66 | M&L 5 mm thick renderingon ceiling surfaces.in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed |
| 67 | M&L 10 mm thick renderingon ceiling surfaces.in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed |
| 68 | M&L Rendering10mm thick in CM 1:4,mixed with WPC @200 ml per bag of cementon fair faces of concrete surfaces without using extra cementas in roof complete all as specified and directed.Note:- WPC shall be measured & paid separately. |
| 69 | M&L Preparation ofnew plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer and 3mm thick coat ofwall care putty complete all as specified . |
| 70 | M&L Preparation ofnew plastered ceilingsurfaces and applying two coats of distemper oil emulsion over a coat of primer and 3mm thick coat ofwall care putty complete all as specified . |
| 71 | M&L Preparation of new wall surfaces andapplying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior wallprimer @ 0.90 litre/ 10 sqm completeall as specified and directed. |
| 72 | M&L Complete removal of existing treatment from wall or ceiling surfaceby washing , rubbing down, stopping of distempered and painted surface including preparing surfaces by applying sufficient layer ofJK/BIRLA white care putty and texture painting of desired pattern or design and shadeas per manufacturers instructions complete all as specified and directed |
| 73 | M&L Preparation of new surfaces of wall and applying two coats of cement base paint complete all as specified. |
| 74 | M&L Preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified |
| 75 | S&F 12 mm thick toughened glass , cladding/ partitions including hinges, door closer/automatic door closer/floor spring and similar work including cutting to shape, moulding of edge etching design if required including locking device and SS handles drilling holes required and necessary fitting for fixing the same complete all as specified and as directed. |
| 76 | S&F 10 mm thick toughened glass ,as in doors, partitions including hinges, door closer/automatic door closer/floor spring and similar work including cutting to shape, moulding of edge etching design if required including locking device and SS handles drilling holes required and necessary fitting for fixing the same complete all as specified and as directed. |
| 77 | S&F 5mm thick plain sheet glass ordinary quality chamfered edges as in shelves of any size including necessary fixing with height adjustable brackets on wall complete all as specified and directed |
| 78 | M&L Preparation of new wooden painted surfaces of any description over 10cm width or girth not otherwise described and applyingtwo coats of synthetic enamel paintover a coat of primer complete all as specified.. |
| 79 | M&L Preparation of new steel surface of any description over 10cm width or girth not otherwise described and applying and two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified. |
| 80 | S&F 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceilingincluding all PP-R plain & brass threaded polypropylene random fittings as required complete all as specified. |
| 81 | S&F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling complete all as specified.including all PP-R plain & brass threaded polypropylene random fittingscomplete all as specified. |
| 82 | S&F15mm dia bore steel water tubing & connection including all fittingin new or old position fixed to wall, ceiling or laid in floors complete all as specified. |
| 83 | S&F25mm dia bore steel water tubing & connection including all fittingin new or old position fixed to wall, ceiling or laid in floors complete all as specified. |
| 84 | Re-fixing old 15mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, sockets, union, reducer, etc as required complete all as specified. |
| 85 | Re-fixing old 20mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, sockets, union, reducer, etc as required complete all as specified. |
| 86 | Dismantling water tanks up to 500Ltr capacity , cleaning and removing all scale and dirt, etc from tanks and room mouths of circulating pipe and refixing to same place all as specified and directed. |
| 87 | S&F Rotational moulded water storage tank 500 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified. |
| 88 | S&F 20mm ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete as in repairsall as specified and as directed. |
| 89 | S&F15 mm dia CP bib taps, fancy typecast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed. complete as in repairs all as specified and directed . |
| 90 | S&F S&F Fancy type angular /stop cock15mm dia, chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete as in repairs all as specified and directed |
| 91 | S&F 15mm bore two way angle valve cock chromium plated fancy type, screwed down screwed for iron pipe or for brass ferrule and fixed complete as in repairs all as specified and directed . |
| 92 | S&F15 mm dia pillar taps fancy type of chromium Platedbrass withhalf turn type capstan heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed completeas in repairs all as specified and directed. |
| 93 | S&F 125 mm dia Fancy type CP shower rose complete as in repairs all as specified and directed. |
| 94 | S&F SS soap dish of size 100mm complete as in repairs all as specified and directed |
| 95 | S&F Vitreous china wash basinflat back size 550X400 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand complete as in repairs all as specified and directed.. |
| 96 | S&F 5.00 mm thick 600mm x450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick PVC board with frame and fixed including hanging arrangementcomplete as in repairs all as specified |
| 97 | S&F Waste coupling of 32mm dia brass CP for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed complete as in repairs all as specified |
| 98 | S&F Vitreous china squatting pan \"Orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) squatting pan including connecting to P trap and to flushing pipecomplete as in repairs all as specified |
| 99 | S&F Brass chromium platedtubular towel rail 20 mm dia \"D\" type 60 cm long including brackets/flanges complete as in repairs all as specified |
| 100 | S&F PVC water connection 600 mm long to wash basin of 15mm dia including CP nuts and washers completeall as specified |
| 101 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete as in repairs all as specified and directed |
| 102 | S&F 10 litres capacityPVC valve less symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets all as specified complete as in repair all as specified and as directed. |
| 103 | S&F Grating doom of size 150mm x 150 mm stainless steel fixing with white cement/ solvent on floor complete as in repairs all as specified and as directed |
| 104 | S&F 15mm dia (min weight 142 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete as in repairs all as specified and as directed |
| 105 | S&F Stainless steel plate rack of size 750x600x250mm of approved make complete as in repairs all as specified and directed. |
| 106 | S&F 75 mm dia bore pipe (SWR) single socket in any length rubber joints laid in trenchescomplete all specified |
| 107 | S&F 75 mm dia bore pipe (SWR) single socket in any length rubber joints fixed to wall.or floorcomplete all specified |
| 108 | S&F 110 mm dia bore pipe (SWR) single socket in any length rubber joints fixed to wall or floor or trenchescomplete all as specified. |
| 109 | S&F 110mm borePVC (SWR) bends any radius complete all as specified. |
| 110 | S&F 110mm borePVC (SWR) junction double, (Double T) equal or unequal any radius with access door complete all as specified. |
| 111 | S&F 75mm borePVC (SWR) bends any radius complete all as specified . |
| 112 | S&F 75mm borePVC (SWR) junction single, (single T) equal or unequal any radius with access door complete all as specified. |
| 113 | M&L Drilling holes in kitchen platform slab for gas pipe line and making good all as specified and as directed |
| 114 | S&F 100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete as in repairs all as specified |
| 115 | S&F 75 mm outlet CI Nahni trap plain with grating including jointing with solvent cement completeas in repairs all as specified |
| 116 | M&L Spout pipe to sunken floor from external wall of the building with 32mm dia light grade including cutting hole with pneumatic tool and drilling hole in pipe and fixing with grey cement etc and length of PVC pipe as suitable as sunken floor or as directed by Engineer-in-Charge |
| 117 | Taking down carefully old unserviceablecopper/ aluminium point wiring (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder , regulators, socketslight fittings etc , removing material to store for keeping in safe custody or for taking credit , and making good disturbed surface of walls, floors, etc. complete all as specified |
| 118 | M & L Concealed point wiring in replacement complete with FRLSH PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , along with one single core of same size stranded copper as continuous earth wire to common earth dolly in and including PVC conduit pipe fitting medium grade of 25 mm dia fixed in concealed surface of wall/ceiling/false ceiling including cutting /chasing in wall as required with ISI mark heavy duty PVC flux boxes suitable for modular plate of required sizes and thickness (factory made) sunk in wall where as required and accessories complete all as specifiedfor the following :- |
| 119 | (a)One light/bell/fan pointcontrolled by one switch complete |
| 120 | (b) One 3 Pin socket out let 5 Amps on the same board. |
| 121 | (c) One 3 pin socket out let 5 Amps on the independent board. |
| 122 | Ditto- all as per item No.118 above but with cable of size 2.5 Sq mm PVC insulated on independent board for power plug/sockets 15 Amps complete all as specified and directed by Engr in Charge. |
| 123 | S&FModular switch one way 6A,1 Module,complete all as specified and directed |
| 124 | S&FModular bell push with indicator, 06 Amps, single pole, one way, 250 volts,complete all as specified |
| 125 | S&F Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed |
| 126 | S&FModular switch one way 16A,1 Module, complete all as specified and directed |
| 127 | S&FModular socket 16A-2/3 pin combined2 Modulecomplete all as specified and directed |
| 128 | S & FAC socket/box 20 Amps with 3 pin plug top combined including 20 amp MCB SP , ISI marked complete all as specified and as directed. |
| 129 | S&F Ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, hum free, AC, 230 volts, 100 watts, duly ISI marked complete all as specified |
| 130 | S & FWhite cover plate with frame , 2 module complete all as specified and directed |
| 131 | S & FWhite cover plate with frame , 3 module complete all as specified and directed |
| 132 | S & FWhite cover plate with frame , 6 module complete all as specified and directed |
| 133 | S & FWhite cover plate with frame , 4 module complete all as specified and directed |
| 134 | S & FWhite cover plate with frame , 8 module complete all as specified and directed |
| 135 | S& F Ceiling rose with cover plate , 5 Amps surface type 240 volts bakelite three terminal complete all as specified and directed |
| 136 | S & FDoor bell ding dong AC 230volts complete all as specified and as directed. |
| 137 | S&FSheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete as in repairs all as specified |
| 138 | S&FSheet metal enclosure distribution board, triple pole and neutral, AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete as in repairs all as specified |
| 139 | S& MCB, SP 240 volts capacity 5 - 32 Amps current rating, 10KA , 240 Volt breaking capacity complete as in repairs all as specifiedand directed |
| 140 | S&FMCB, SP 240 volts, 40 to 63 Amps capacity complete as in repairs all as specifiedand directed |
| 141 | M&L Concealed sub main wiring of two run with 4 Sqmm single core PVC insulated, FRSH,flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit pipe 25 mm dia medium grade and accessories of suitable size and fixed on concealed surface of wall/ceiling with cutting chases for conduit including one run of 4.0 Sqmm single core PVC insulated, FRLS ,flexible copper cable as earth continuity conductor in green color all as specified and as directed. Note- (a)Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit). (b)Make goodto disturbed surface of wall and floor with existingas directed by Engr in Charge . |
| 142 | S&F Exhaust fan 450 mm sweep made of steel body AC single Phase. 230Vwith, blades, and frame and louvers including all electrical connection complete all as specified and as directed. |
| 143 | S&F Exhaust fan 300mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper windingincluding all electrical connection complete all as specified and as directed. |
| 144 | S&F Water heater storage type, electric, capacity 25 liters BEE 5 star rated including suitable size and length of PVC connection for hot & cold water and fixing arrangement complete with necessary fastener and nut bolts washer etc all electrical connection complete all as specified and as directed |
| 145 | S & F LED batten fitting along with removable LED Tube 20W, 230 Volt, 6000K, wall /ceiling mounted, LED batten fixed by means of bolts, ABS rotor suitable for single side connections. LED rod having glass material complete having lumen efficacy minimum 100 lm/w,CCT 6500 K, powered by integral constant current driver suitable for 240 V AC with all accessories internally prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size complete as in repairs all as specified |
| 146 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete as in repairs all as specified |
| 147 | S&FLED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type complete all as specified and directed. |
| 148 | S&F LED light 35 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.as in repairs all as specified |
| 149 | M&L Earthing complete with galvanised steel earth plate electrode 60 x 60cm x 6 mm buried directly in ground level with teop edge of earth plate at a depth not less than 1.5m below ground level connected to and including galvanised iron strip 25 x 4 mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No.3 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock,PCC (1:3:6) type C-1 earthing chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforce with welded steel wire fabric (APM) weight not less than 4 Kg/Sqm, funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 40mm bore medium grade 7.5 m long test point etc complete as in repairs all as specified. |
| 150 | Supply, install, testing and commissioning in replacement weather and vermin proof LT feeder pillar box (Panel board) factory fabricated outdoor type canopy top factory lock front and back opening totally enclosed made out of 3.15 mm thick sheet metal enclosure of suitable size with angle iron frame of MS angle 40 X 40 X 5 mm upto 1.5 mtrs length from ground level duly powder coated of size 600(W) X 900(H) X 400 (D) mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and side locking arrangement consisting of sufficient Nos of circular cables entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc. inside the enclosure, the required Nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15micron) grey hammer tone with one coat of including connecting with L.T armoured incoming and outgoing cables and including required sizes of cable lugs of aluminium and LT panel should be CPRI approved and factory fabricated complete all as specified and directed and consisting of the following:-(i)MCCB 125 Amp4 Pole (AC 415 Volt), 16 KA-01 No (incoming)(ii) 63 Amp MCB TPN ,415V10 KA- 03 Nos, (Out going)(iii) Aluminum bus bar 200 Amp - 01 set(iv)Indicator LED lamp RYB - 01 Set(v)Internal wiring with copper conductor incl necessary lugs and thimbles - 01 Job (vi) Space for 02 Nos of spare MCB |
| 151 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, / laying of pipe / cable etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil complete all as specified and directed. |
| 152 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick using excavated soil all as directed |
| 153 | Removal of surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed |
| 154 | Labour only boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique/ manually and necessary machine complete all as specified and as directed. |
| 155 | Supply and laying of DWC HDPE pipe of SN4 category conforming to IS 14930 part I and II including accessories like HDPE snap fit coupler with neoprene \"O\" ring of 40 mm size. |
| 156 | Supply and laying or fixing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (H/D) earthed cable aluminium conductor, 1100 volts grade with stranded for 16 sq. mm, 4.0 core nominal cross section in service connections complete all as specified and directed |
