Stage Contract For Sub Division Dh Pora.- 1 Earth work in excavation all kinds of soil by mechinicalmeans in trenches for foundations etc including dressing of sides and ramming of bottoms, all leads, liftincluding getting out excavated earth and disposal of surplus excavated earth as per the directions of Engineer In-Charge complete 2 Earth work in bulk excavationall kinds of soil by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50meters and lift upto 1.5 m,or as directed by Engineer-in-Charge. 3 Surface dressing of the ground including removing vegetation and in-equalitiesnot exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. 4 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 5 Providing and laying stone soling duly hand packed in maintaning level and section includingcarriage of the same for an average lead of 10KMs complete. 6 Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete 7 Providing and laying in position cement concrete 1:3:6 (1 Cement:3 Corase sand: 6 grade stone aggregate 20 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete 8 Providing and laying in position cement concrete 1:2:4 (1 Cement:2 Corase sand: 4 grade stone aggregate 20 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete 9 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but xcluding the cost of centring, shuttering and finishing with. 10 Providing and laying cement concrete 1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size)in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but xcluding the cost of centring, shuttering and finishing with. 11 Providing and laying 50 mm thick Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand: 4 graded stone agg 20mm nominal size crushed) finished with a floating coat of neat cement including cement slurry and curing with all carriages complete 12 Providing and laying 40 mm thick Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand: 4 graded stone agg 20mm nominal size crushed) finished with a floating coat of neat cement including cement slurry and curing with all carriages complete 13 Providing and laying in position of reinforced cement concrete 1:1.5:3(1 Cement, 1.5 Corase sand: 3 grade stone aggregate 20mm nominal sizeincluding curing but excluding the cost of centering, shuttering, finishing and reinforcement all work upto plinth level inculinding all carriages complete 14 Reinforced cement concrete work 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts ,suspended floors,lintels,beams etc upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement. including all carriage complete 15 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe 500D or more. Inculding all carriages complete 16 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. 17 Centering and shuttering including strutting, propping etc. and removal of form for:Walls (any thickness) including attached pilasters, uttresses, plinth and string courses etc. 18 Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms. 19 Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers. 20 Brick work with common burnt clay bricks of class designation 7.5 in Super structure above plinth level upto floor V levelin Cement mortar 1:6 ( 1 cement : 6 fine sand) Including all carriages involved complete 21 15mm cement plaster 1:6 (1 Cement: 6 Fine Sand) including all carriages complete 22 12mm cement plaster 1:6 (1 Cement: 6 Fine Sand) including all carriages complete 23 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Kiln seasoned and chemically treated hollock wood 24 Providing and fixing glazed shutters 35 mm for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws : Kiln seasoned and chemically treated hollock wood 25 Providing and fixing of 35 mm panelled or panelled and glazed shutters for doors, windows, clerestory windows and other frames, fixing with butt hinges of required size with necessary screws all complete as per direction of Engineer-in-charge completeKiln seasoned and chemically treated hollock woodwith all carriages complete 26 providing and fixing of glass panes of 4mm thickness weight not less than 10kg/sqm including necessary beadings,nails etc 27 Providing and fixing Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked for doors. 28 providing wood work in frames of false ceilings, truses,purlins,posts or like componants including screws nails etc complete.popular wood 29 Structural steel work in welded built up sections, trusses and framed work etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer includingall carriages complete. 30 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2 31 Providing ridges or hips,valleys of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 32 providing and fixing colour coated 0.50 mm thick C.G.I sheets for eves boardings, sofits,gables etc including necessary fittings,fixtures complete. 33 Providing and fixing aluminum hardware fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete (Standard Make) 34 Tower Bolts 150mm 35 Handles 125mm 36 Providing and laying of 300 mm dia (NP2) RCC pipes in proper position/ grade includingprovidong of required quantity of RBM over and under pipes as cusion including cost and carriages of pipes, RBM, loading, unloadingcomplete. 37 Providing and laying of 450 mm dia (NP2) RCC pipes in proper position/ grade includingprovidong of required quantity of RBM over and under pipes as cusion including cost and carriages of pipes, RBM, loading, unloadingcomplete. 38 Providing and laying of 600 mm dia (NP2) RCC pipes in proper position/ grade includingprovidong of required quantity of RBM over and under pipes as cusion including cost and carriages of pipes, RBM, loading, unloadingcomplete. 39 Providing and laying of 900 mm dia (NP2) RCC pipes in proper position/ grade includingprovidong of required quantity of RBM over and under pipes as cusion including cost and carriages of pipes, RBM, loading, unloadingcomplete. 40 Providing and Laying River Bed Material ( RBM) with specifed grading including sorting, watering and spreading in uniform layers on existing surface and consolidation with Vibrator Roller to the required gradient and camber including carriage of the same for an average lead of 10KMscomplete. 41 supplying and stacking, laying, spreading and compacting stone aggregate of 63-45mm size to WBM Specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller of 8-10 tonne capacity in stages to proper grade and camber applying and brooming 13.2 mm type A screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to required density including all carriages of materials as involved complete (Finished work to be measured 75mm thick compacted thickness) 42 Providing and Laying River Bed Material ( RBM) with specifed grading including sorting, watering and spreading in uniform layers for development of bermsand consolidation with Vibrator Roller including carriage of same for an average lead of 10 KMscomplete. 43 supplying and stacking, laying, spreading and compacting stone aggregate of 53-22.4mm size to WBM Specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller of 8-10 tonne capacity in stages to proper grade and camber applying and brooming 11.2 mm type A screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to required density including all carriages of materials as involved complete (Finished work to be measured 75mm thick compacted thickness) 44 Providing and applying2 mm thick white cement based putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 45 Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm 46 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 47 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, colours, shades and sizeas approved by Engineer-in-Charge,in walls,skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade with all carriages complete 48 Providing and laying vitrified floor tiles ofsize 600x600mm(thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, colour,shade laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., including all carriages complete 49 Providing and fixing of CP fittings of Jaquar, cera or equivalent make 50 bib cock long body 51 Angle Valve 52 Extension Nipple 15x50mm 53 Providing and fixing PVC B Type soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete 54 100 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B 55 75 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B 56 Providing and fixing 100mm PVC fittings of Standard Make 57 Collar 58 Bend 59 Door Bend 60 Floor Trap 61 Providing and fixing 75mm PVC fittings of Standard Make 62 Collar 63 Bend 64 Door Bend 65 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-conceled complete 66 PN-16 pipe, 16mm OD(SDR-7.4 67 PN-16 pipe, 20mm OD(SDR-7.4 68 PN-16 pipe, 25mm OD(SDR-7.4 69 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.External work-including trenching refilling etc. complete 70 PN-16 pipe, 25mm OD(SDR-7.4 71 PN-16 pipe, 40mm OD (SDR-7.4) 72 PN-10 pipe , 50mm OD (SDR-11) 73 Providing and fixing PPR Unions ( Standard make) 74 20mm 75 25mm 76 40mm 77 50mm 78 Providing and fixing of ply board 12 mm thick of standard quality for ceilings and walls over popular wood joists 50X50 mm including necessary nails,screws,adhesive complete. 79 supply and filling of Nallah stones in wire creats hand packed tightly including spreading,binding of wire crates 100X 100 mesh wire of dia 4mm after stone filling including cost and carriage of wire creats and stones complete as per the directions of Engineer In Charge 80 Engament of JCB for clearance,excuvation for works of various natures 81 Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message(bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame ofM.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. Cautionary/warning sign boards 600X600mmlength of 3650mm. 82 Providing and fixing of iron railings for culverts,bridges made out angle iron,flat iron,iron hallow sections of required size and gauge,including cutting,welding and applying a primming coat of approved steel primer and two or more coats of paint complete. 83 Engament of labours for works of various natures 84 Engament of tractors for removing of various excuvated/ unhygenic materials for an avg lead of 2km 85 Removing and relaying of exsesting RCC spun pipes of different dias including providing of required quantity of RBM as cushion and carriage of the same as per directions of Engineer in charge complete 86 Providing, laying, spreading and compacting 75 mm thick graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions ofEngineer-in-Charge Complete 87 Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom.On W.B.M. /W.M.M. @ 0.4 Kg/sqm. 88 Providing and applying tack coat using hot straight run bitumen of grade -VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. (On BT Surface @0.50Kgs/Sqm) 89 Providing and laying 50 mm thick bituminous macadam with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum/ Batch Type Hot Mix Plant using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge 90 Providing and laying semi- dense Bituminous concrete of 25 mm compacted thickness with bitumen of grade VG 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum/Batch type Hot Mix Plantusing crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge 91 Providing and laying 6mm thick seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. 92 Hire charges for Supply and installation of water proof shamiyana(Superior Quality) including fixing in position at venue, internal decorations and removal of same after end of celebration including all carriages etc all as directed by engineer In-Charge complete 93 Hire charges for Supply and installation of Water Proof tentsand removaing of same after end of celebration as directed by engineer in charge including all carriages complete ( For Spectators) 94 Hire charges for supply and laying of carpet 1.22 mtr wide andremoving of same after the end of celebration as per the directions of Engineer Incharge incluidng all carriages complete 95 Hire charges for supply and placing in position Plastic chairs including all carriages involved complete 96 Hire charges for supply and placing in position wooden chairs including all carriages involved complete 97 Hire Charges for the supply and placing in postion of Sofas (THREE SEATER) with table covered with white clothincluding all carriages 98 Hire charges of dice/ stage og required size and height made out of wooden joists and planks of required size as per the directions of Engineer in charge with all fittings,fixtures and furnishing complete 99 NOTE:- All other items in the J& K schedule of rates 2022 issued vide Govt order no 216 PW ( R&B) of 2022 Dated:- 01-07-2022 appended as annexure -1 to above order for requiste items.
