|
| 1 | Supplying andFixing of wall mounting type Energy meter panel made of 16G MS sheet including cutting welding and powder coatingsuitable for working on 440V 50Hz AC supply and consisting of switch gears such asa) DU100H(63A-80A thermal release range) 3pole MCCB-1No( M/s L&T Model CM97894OOH2 or superior make) b) 100A 3No Rewirable fuse Cutout with NL -1set c) 300mmx250mm x6mm thick hylum sheet for energy meter and 40A 4pole RCCB100mA- 1No (M/s Havells) d) 1set of100A 4pole alu Bus bar etc as reqd (Note: The work shall be carried out in coordination with BESCOM authority, Building owner and BSNL engineer incharge for obtaining power supply Service connection including applying for new power supply) |
| 2 | Providing and Fixing ofpowder coated MS Box of size 300mmx300mmx200mm depth with 100 Amps 3phase & Neutral Aluminium bus bar ofin a suitable length, sealing arrangement as per BESCOM specification, fixing on surface of wall, necessary insulators, RYB sleeves, bolt & nuts, earthing the enclosure etc., as required. |
| 3 | Supplying and fixing of 3 phase 0-30A Direct operated BESCOM approved KWH energy meter in existing meter board including, fixing with necessary hardware/ clamps arranging for BESCOM power shut down, connections with existing wires, testing etc as required (Bescom approved) |
| 4 | Laying of the 4 core 25Sqmm PVC insulated / XLPEAluminium conductor UG Cable of 1.1 KV grade on surface of wall / pole /in existing pipe i/cnecessary testing & commissioning etc., complete as reqd. |
| 5 | Supplying and making, end termination with brass compression gland and aluminium lugs for the following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade etc., complete as required. a) 4 Core 25sq. mm |
| 6 | Supply and Fixing of Pothead suitable for 4 core 25Sqmm UG Cable i/c providing suitable clamp on BESCOM Pole etc complete as required |
| 7 | Supplying and fixing following electrical items suitable for operation of 230V/415V 50HZ AC supply i/c making necessary interconnections, testing, commissioning etc. as reqd.[M/s Philips/CG/Anchor/L&T or s/s make] a)100AAerial Fuse Cutout- 3No & 1No neutral link with DMC/FRP Sheet & suitable clamp (BESCOM approvedmake) |
| 8 | b)19/25 mm PVC alkethene sleeve |
| 9 | c) 4x16Sqmm PVC insulated AL weather proof wire |
| 10 | Supplying & Laying the 40mm size of B class GI pipe for road crossing / in ground / on surface of wall etc i/c excavation, refilling the trench etc., complete as reqd(M/s Tata/Jindal or superior make) (The work shall be carried out in coordination with BBMP, Building owner and engineer inchargefor obtaining power supply Service connection including applying for road cutting permission ) |
| 11 | Supplying and fixing of 40mm dia rigidPVC pipe with accessories on surface of wall including clamping on surface of wall/with support etc as required. |
| 12 | Road Cutting the existing by using compressor hammer drill / manual cutting, clearing the debris etc., and making good the same with cement concrete of proportion 1:2:4 RCC concrete (Approximate size 0.25Mtr x 0.3Mtr depth ), neat finishing, making good the damages etc., complete as reqd.(The work shall be carried out in coordinationBuilding owner and engineer inchargefor obtaining power supply Service connection) |
| 13 | Providing Chemical Earthing by using Copper bonded 17 mm dia & 3mtr long Rod, Earth Enhancing compound, Terec powder, earth pit cover i/c excavation and refilling the pit, sign writing of earth chamber with paint etc as reqd. |
| 14 | Providing and fixing 25mmx5mm G.I strip on surface/ in existing pipe or in recess for loop earthing including earth excavation wherever etc., as required. |
| 15 | Providing and fixing of 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ sub main wiring/ cable as required. |
| 16 | Supplying and fixing of 40mm heavy duty rigid PVC pipe with accessories on surface of wall including clampingetc as required. |
| 17 | Supplying and Laying of the 4 core 10Sqmm PVC insulated unarmouredcopper conductor Cable of 1.1 KV grade on surface of wall /in existing pipeetc., complete as reqd [M/s Havells or similar superior make) |
| 18 | Supplying and fixing, powder coated company fabricated Double door, sheet steel TPN MCB DB of following way complete with neutral bus bar, earth bar, din bar, suitable for operation on 240V, 440 V AC supply, on surface of wall, i/c making necessaryinterconnections,extending earthing etc. complete as required [Make: M/s Havells Model DHDETHCDOW48/ M/s MDS/L&T/Legrand similar superior make] a) 4WAY(8+12) way Double door TPNMCB DB |
| 19 | Supplying and fixing, the following \"C\" curve type miniature circuit breaker / accessories suitable for operation on 415V/230V AC supply in the existing MCB DB\"s complete i/c making necessary interconnections, testing and commissioning etc completeas required [Make: M/s MDS / Hager/ L&T or similar superiormake].a) 63 A 4 pole MCB |
| 20 | b) 40 A TPN MCB |
| 21 | c) 6-32 A SP MCB |
| 22 | Supplying and fixing 15/16 A piano type switch and 6/16A 6Pin socket in suitable size MS Box including phenolic laminated cover plate interconnections etc. as required. |
| 23 | Supplying and fixing of bulk head fitting with 12W LED bulb suitable for working on230V 50Hz AC supplyon surface of wall/ceiling including extending of 2core1.5sqmm copper wire in PVC conduitfrom DB to fitting connections, testing etc as required (M/s Havells/ Anchoror SS make) |
| 24 | Transportation of 4core25 Sqmm cable from WMS compound to BTS Devanahalli town including arranging vehicle, labour, loading and unloadingetc as reqd (aprox100mtr Cable) |
