Tender For Provision Of Otm Accn At Aurangabad.; 1 SCH A PART-I to XII: These schedules are pre-priced by MES and the Contractor shall works out his lump sum costunder Col 6. 2 Total amount of Sch ‘A’ Part I (Buildings and Structures) 3 Total amount of Sch ‘A’ Part II (Internal Water supply) 4 Total amount of Sch ‘A’ Part III (Internal Electrification) 5 Total amount of Sch A Part-IV(Road, Path & Culverts) 6 Total amount of Sch ‘A’ Part V(Area drainage) 7 Total amount of Sch ‘A’ Part VI (Sewage Disposal) 8 Total amount of Sch ‘A’ Part VII (Compound Wall, Fencing and Gates) 9 Total amount of Sch A Part-VIII (Solar Hot Water System) 10 Total amount of Sch A Part-IX (External Water Supply) 11 Total amount of Sch A Part-X (External Electric Supply) 12 Total amount of Sch A Part-XI (Rain water Harvesting) 13 Total amount of Sch A Part-XII (Site clearance,excavation and earthwork) 14 NOTE: Schedule ‘A’ Part XIII, Bidders shall insert their rate in Column-6 only and the Estimated rate indicated as 0.0 are for that purpose. 15 SCHEDULE A PART-XIII (MISC B/R ANDE/M WORKS) 16 Supply , installing and commissioning of Water cooler, electric driven, single phase AC 230 Volts 50 Hz, fully stainless steel body of storage capacity 40 litres and cooling capacity 40 litres including connecting lead and suitable 3 pin plug top complete all as specified and directed.(Make:- Samsung / LG / Godrej / Whirlpool/ Blue Star/ Usha/ Voltas). 17 S&F Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and design for input variation between 170 volts to 250 volts with outputvoltage stabilized at 230 volts with accuracy of ± 2.5 % of capacity 2.00 KVA including all fixing arrangement complete all as specified and directed. 18 S&F LED light fitting out door type Building security light 25W to 30W fixture consist of Extruded Aluminium Extrusion housing with PC Diffuser, LED Fixture System wattage of 36W /40W, 140V- 260V AC,System Lumen Output min 3960 Lumen in 36W or 4400 lumen in 40W with 5700 - 6500 K CCT with pf > 0.95, CRI >=80 and with < = 10% THO, with min 2.5 KV Surge protection in Built and complete LED fixture with BIS R mark and R Registration no. with and including brackets made of 40mm dia Gl tubing light grade bent to shape required including 2 Nos of Flat Iron brackets duly welded with nuts, bolts and washers,complete all as specified and directed. (Make: Philips Cat No SM 365C LED 32-6500 PSU 00 WH or Havells Cat Part No ENDURAPEARLSL25WLED 757SASY TOPC or equivalent model in the makes listed in Appendix C). 19 S&F 2x 18/20 watt Ceiling fitting indoor type, 36w-40w ceiling mounted bottom opening LED cleanroom fitting including LED fixture powder coated CRCA housing and polycarbonate diffuser, LED fixture systemwattage of 36w to 40w, 140-260V AC, system Lumen output min 3600 Lumen in 36 W or 4000 Lumen in 40W with 5700-6500 K CCT with PF>0.95 CRI>=80 and with <=10 % THO, with Min 2.5 IW Surge protection in Built and complete LED fixture with BIS Mark and R Registration no. and shall confirm all above specification, complete all as specified and directed. (Make: Havells Cat Part No. BIBWP 10W LED / Crompton Cat Part No. LBHP-10-CDL / Halonix Cat Part No. HLBH-21-10-CW or equivalent in makes as per Appendix C). 20 S&F 12 watt Ceiling fitting indoor type, square type ceiling mounted bottom opening LED cleanroom fitting including LED fixture powder coated CRCA housing and polycarbonate diffuser, LED fixture systemwattage of 12 watt, 140-260V AC, system Lumen output min 1200 Lumen in 12 W. with 5700-6500 K CCT with PF>0.95 CRI>=80 and with <=10% THO, with Min 2.5 KV Surge protection in Built and complete LED fixture with BIS Mark all as specified and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. (Make: As per Appendix C). 21 M&L Cutting existing road/hard standing surfaces to a depth of 60 cm and 50 cm width and getting out for laying under ground pipe or LT UG Cables etc., including returning filling in, watering well ramming in layers not exceeding 25 cm in soil and filling the trench top with 15 cm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate ) and making good the disturbed surface complete all as specified and as directed 22 M&L Cutting existing water Main Pipe and tapping with provision of special, joints including excavation and earth work complete all as specified and directed. 23 M&L Construction of valve chamber of size 600mm x 600mm x 450 mm including MS cover complete including necessary earth work in any type of soil, PCC 1:3:6 type C-2 in base concrete 100 mm thick, old size fly ash brick work built in cement mortar 1:6 with 10 mm thick plaster internally in CM 1:4 and 15 mm thick externally in CM 1:4 with 3 mm thick MS sheet cover with hinges and locking arrangements with Pad lock fixed to angle iron frame made out of 50mm x 50 mm x 6 mm MS angle complete with two coats of synthetic enamelled paint over a coat of red oxide primer on all steel work and three coats of white washing on plastered surfaces of valve chamber, complete all as specified and directed. 24 M&L Construction of valve chamber of size 900mm x 900mm x 900 mm including MS cover complete including necessary earth work in any type of soil, PCC 1:3:6 type C-2 in base concrete 100 mm thick, old size fly ash brick work built in cement mortar 1:6 with 10 mm thick plaster internally in CM 1:4 and 15 mm thick externally in CM 1:4 with 3 mm thick MS sheet cover with hinges and locking arrangements with Pad lock fixed to angle iron frame made out of 50mm x 50 mm x 6 mm MS angle complete with two coats of synthetic enamelled paint over a coat of red oxide primer on all steel work and three coats of white washing on plastered surfaces of valve chamber, complete all as specified and directed. 25 Supply, installation ,testing and commissioning of L T panel Outdoor type factory fabricated front openable with locking arrangements compartmental type made out of 3.15 mm thick CRCA sheet epoxy painted and two coats of synthetic enamel Paint over a coat of red oxide, of size 750mm x 600mm x 550mm complete mounted on and including MS angle Iron frame made out of 40 x 6 mm thick of suitable size painted with black synthetic enamel paint over a coat of red oxide primer embedded in PCC (1:2:4) type B-1 in foundation up to the depth of 300 mm in GL and 150 mm above ground level with suitable size & No of Cable glands and including necessary cable connection excavation and earth work suitable for housing and including the following accessories:- 26 (i)100 Amps 25 KA 4 Pole with overload & thermal release setting -01 Nos (I/C)(ii)MCCB 32 Amps 16 KA 4 Pole with overload & thermal release setting - 02 No (01 No as Stand By)(iii)MCCB 40 Amps 16 KA 4 Pole with overload & thermal release setting- 01 No)(iv)MCB TPN 16 Amps 10 KA 4 Pole - 01 Nos(v) MCB TP 06 Amps 10 KA - 04 Nos (01 No as Stand By)(vi)MCB SP 06 Amp - 04 Nos(vii)Aluminium bus bar 250 Amp with 4 Strips of suitable size-01 Set(viii) Astronomical time switch three phase 415 V suitable for Indian Region longitude/latitude with 3 pole ML-2 pole contractor suitable for 60 Amp complete with all accessories - 01 Nos(ix)LED type indicator Lamp - 01 Set (RYB)(x) Multifunctional Energy meter (Voltage, Amp & frequency) 27 Supply, installation ,testing and commissioning of L T panel Outdoor type factory fabricated front openable with locking arrangements compartmental type made out of 3.15 mm thick CRCA sheet epoxy painted and two coats of synthetic enamel Paint over a coat of red oxide, of size 750mm x 600mm x 550mm complete mounted on and including MS angle Iron frame made out of 40 x 6 mm thick of suitable size painted with black synthetic enamel paint over a coat of red oxide primer embedded in PCC (1:2:4) type B-1 in foundation up to the depth of 300 mm in GL and 150 mm above ground level with suitable size & No of Cable glands and including necessary cable connection excavation and earth work suitable for housing and including the following accessories:- 28 (i)MCCB 40 Amp 4 pole 16 KA with overload & thermal release setting -01 No (incoming)(ii) MCCB TPN 20 Amps 16 KA -01 No( outgoing)(iii) MCB TPN 16 Amp, 10 KA -02 Nos(Outgoing) (01 No as Stand By)(iv) MCB SPN 06 Amps 10 KA-04 Nos(v)Aluminium bus bar 150 Amp with 4 strips of suitable size-01 Set(vii) LED type indicator lamp -01 Set (03 Nos)(viii)Multifunctional Energy Meter (Voltage, Amp & Frequency) 29 S&F FRP junction box, light weight low corrosive, suitable for pole mounting including MCB SP 6 Amps, Box size 250x200x100mm including necessary connection for loop in an loop out cable connector and suitable size for cable glands complete all as specified and directed. 30 S&F Cable route indicator made out cast iron and embedded L T Cable on the plate of size 80 mm dia 5 mm thick and grouting lugs of suitable size including grouted in PCC foundation of suitable size complete all as specified and directed . 31 S&F Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and internal dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches suitable for cable protection of LT cables of various sizes, complete all as specified and directed. 32 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas, depth not exceeding 1.5 m in all kind of soils, including getting out the excavated soil complete all as specified. 33 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas, depth exceeding 1.5 m and not exceeding 3.0 m in all kind of soils, including getting out the excavated soil complete all as specified. 34 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas, depth exceeding 3.0 m and not exceeding 4.5 m in all kind of soils, including getting out the excavated soil complete all as specified. 35 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas, depth exceeding 1.5 m and not exceeding 3.0 m in hard rock, including getting out the excavated soil complete all as specified. 36 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas, depth exceeding 3.0 m and not exceeding 4.5 m in hard rock, including getting out the excavated soil complete all as specified. 37 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in trenches (not exceeding 1.5 m in width or 10 Sqm in plan) and not exceeding 1.5 m in depth; for foundations etc. or for shafts, walls, cesspits, manholes, pier holes, laying pipes or underground cables etc., in all kind of soils, including dressing of sides and ramming of bottoms, and getting out the excavated soil complete all as specified. 38 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in trenches (not exceeding 1.5 m in width or 10 Sqm in plan), depth exceeding 1.5m but not exceeding 3.0 m; for foundations etc. or for shafts, walls, cesspits, manholes, pier holes, laying pipes or underground cables etc., including dressing of sides and ramming of bottoms, in all kind of soils including getting out the excavated soil, complete all as specified. 39 Supply and fixing of Double Wall corrugated class SN8 pipe, Laid and Jointed complete with collars 150mm complete all as specified and as directed. 40 Supply and Fixing of Double Wall corrugated class SN8 pipe, Laid and Jointed complete with collars 200mm complete all as specified and as directed. 41 Supplying, filling, spreading & levelling stone boulders of size range 5cm to 20 cm in screen chamber, in the required thickness, for all leads and lifts, complete all as specified and as directed. 42 Supplying, filling, spreading & levelling gravels of size range 5mm to 10mm in the screen chamber over the existing layer of boulders in required thickness, for all leads and lifts, complete all as specified and as directed. 43 Supplying, filling, spreading & levelling coarse sand of size range 1.5mm. to 2mm in screen chamber in required thickness, over gravel layer, for all leads and lifts, complete all as specified and as directed. 44 Supply , install, commissioning and testing of Centrifugal monoblock Pump set of capacity 3.0 HP pump set heavy duty, 3000 RPM ,having discharge 150 LPM, at 15-27 mtrs head, with HDPE pipe of bore 50 mm form pump set to outside the bore all including electric motor working on three phase 415V, AC elect supply 50 HZ complete including MS Clamp/Flats, Reducer socket, PVC bend, Barrel, PVC Nipple, suitable rated DOL starter, volt meter, ammeter,selector switch on off switch etc all assembled in cubical panel made up of MS CRCA sheet 16 SWG, duly painted with powder coating including MS angle iron supports duly embedded in plain cement concrete foundation complete all as specified and as directed.
