}

Tender For Mob Ops Room (S And C), ahmedabad-Gujarat

Indian Army has published Tender For Mob Ops Room (S And C). Submission Date for this Tender is 05-06-2025. Building Work Tenders in ahmedabad Gujarat. Bidders can get complete Tender details and download the document.




Tender Notice

49174725
Tender For Mob Ops Room (S And C)
Tender
Indian
Gujarat
Ahmedabad
05-06-2025

Tender Documents

Tender Details

Tender For Mob Ops Room (S And C); 1 Complete superstructure for Mob Ops Room (Part-I As per Appx A):- 2 Supply of complete Mob Ops Room of size 126x8x76 and after opening up both side the size of shelter 12’6” x 23’ 6” x7’ 6” (Internal dimension).The Technical specification/compliance of the required items of hydraulic operated transpotable Office shelter of size126x8x76 as given in Technical specification, the main console is to be made out of minimum RHS pipe of size 96mm x 48mm x 3.20mm main frame with channel 60x40mm. The runners of the walls and roof to be made out of minimum 50mm x 50mm x 2.9mm thick MS Square pipe medium grade. MS Sheet of minimum 0.8 mm thickness to be used for out covering with minimum MS flat of 25 x 4 mm and the over lapping of the sheet to be fixed through riveting method. All sheet members to have two coats of steel guard Nano anti rusting paint. All RHS members confirming to IS- 4923:1997. Structure should be able to withstand temperature varying from - 30 degree to 60 degree Celsius. Ref the Drg attached. RHS of lesser section may be used to strengthen the frame console and match the uniformity of roof, floor and walls without compromising the strength of the structure. All joints of the container should be air sealed properly including fully hydraulic jack. The following items are required for eraction of shelter:- 3 MS Sheet 0.80mm thick( Make : SAIL/TATA/APOLLO) 4 RHS 96x48x3.2mm thick( Make : SAIL/TATA/APOLLO) 5 MS Square pipe 50x50x2.9mm thick (Make : SAIL/TATA/APOLLO) 6 MS Rectangular pipe 25x50x2.9mm thick (Make : SAIL/TATA/APOLLO/) 7 RHS 60x40x3.2mm thickMake : SAIL/TATA/APOLLO) 8 Hinges (6x10) Factory made ISI marked 9 Hinges small heavy duty factory made ISI marked 10 Rib Bits 3/4 11 Door of size (7x3) of 32mm thick termite proof chemcially treated ply with angle 50x50x6mm frame with all fittings 12 ACP sheet of 3mm thick aldecore (Make : Timex / Alex) 13 Container sealing for air tight enviorment 14 18x18x5mm thick MS Plate as base plate of Jacks( Make : SAIL/TATA/APOLLO) 15 Thermocol Sheet 30mm thick 48kg/Sqm density (10x4) IS 4671-1984 type 1 16 Wooden Flooring 8 to 9mm thick (Make : Vista/Kitply/Wood Master ) 17 Ply board of size 8x4 of 19mm thickness (Make : National/Green Ply) 18 12x12x5mm thick MS Plate as base plate of JACKS 19 Door of size (6x3) of 32mm thick termite proof chemcially treated ply with angle 50x50x6mm frame with all fittings 20 Modular switch socket with combination 5 & 15 Amp (Make- Philips/ Crompton /Wipro/Havells/Bajaj ) 21 Recess mounting fitting 2x2 LED (Philips/ Crompton /Wipro/Havells/Bajaj 22 Recess mounting fitting LED 8 Watt (Philips/ Crompton /Wipro/Havells/Bajaj ) 23 Copper cable 1.5 Sqmm PVC Sigle core (Make-Havells/Palza/ Anchor). 24 Copper cable 2.5 Sqmm PVC Sigle core (Make-Havells/Palza/ Anchor). 25 Distribution box 6 way 240 V with MCB SP 20 Amp 10KA C curve 6 Nos. (Make - Havells/ Legrand/Anchor) 26 Set of 4 Hyadraulic jack system with level arrangement of following : (a) Cylinder Part Code No. MEJC-0385(b) Crome Rod Part Code No MECR -0384(c) Piston Part Code No MEP-0383(d) Jacks stopper Part Code No MEDP-0386(e) Distribution plate Part Code No MEDP-0386(f) DV-8x1/4 (p) 350 Bar(g) Roof jack plate part code No MEFID 0387(h) Roof Jack Cylinder Part Code No MEJC2 0388(j) Roof Jack Crome Part Code No MERA 0389(k) Roof Arm Part Code No MERA 0395(l) End Cap-Part Code No MEEC-0386(m) Sliding Base bottom Part Code No - MESB2-0400(n) Jack Slider Part Code No MEJS-0398(o) Inner Jack Box Part Code No MESCP-0399(p) Slider Base top Part Code No MESB2-0400(q) Distribution Lever Make : Dadest Nose(r) Pipe Make : Jindal 27 Hydraulic Floor System 28 Hydraulic Roof System 29 Eletronic Opertaed pump (Make : UNN Co) and motor make : Jonex 30 Hydraulic Oil of Make 68 31 Red Oxide Primer (Make: Berger/Nerolac/Asian) 32 Enamel Paint (Make: Berger/Nerolac/Asian) 33 Paint OG RFU (Make: Berger/Nerolac/Asian) 34 Paint Brown (Make: Berger/Nerolac/Asian) 35 Paint Sand Colour (Make: Berger/Nerolac/Asian) 36 Turpentine Oil 37 Starir case made of MS angle and flats upto height of door 38 Manual jack 1 Ton capacity 39 Fire Extinguisher foam type 1 Kg capacity Make : Ceasefire/Ecofire/Safe 40 PVC Conduict pipe 35mm( Make : Philips/Finolex /Wipro/Havells/Anchor 41 Complete superstructurefor Fd Mobile toilet with trolly(Part-II As per Appx A):- 42 Supply of completeMobile toilet with trolly ready to user including all fittings / accessoceries complete as mentioned in technical specification 43 Supply of ancillaries for each Fd Tech shelter (Part-III As per Appx A) :- 44 Executive revolving chair with arm, seat material of PU foam covered with pure leatherite, material of fabric back cover/material for backrest shall be leatherite, height adjustment up to 120mm, push back type, overall height 1140mm, backrest height 600mm, backrest width 500mm, seat height 450mm, seat width 550mm, seat depth 550mm, thickness of PU foam used in backrest 50mm, arm material shall be of PU foam bonded chrome coated. (Make:- Neelkamal/Supreme/equivalent) 45 Plastic moulded seat cum back with support structure including seat cusion and arms, seat width 560mm, seat depth 560mm, chair height 825mm, thickness of PU foam in seat is 40mm, thickness of PU foam in backrest is 45mm. (Make:- Neelkamal/Ssupreme/Cello). 46 Map Boards. Sliding Board03 Nos sliding boards (Size as per requirement) made of aluminium frame section of size (63mmx38.1mmx1.5mm thick) sliding aluminium panel frame of size (38.1mmx12.7mmx3mm thick) with proper locking arrangements should be provided with frame and channels boards shall be soft board. 47 Accessories for mounting of projector with all connected wires & cables 48 Enviroment control device 1.5 Ton with indoor unit to be mounted inside the container and external unit to be mounted on outer wall near hydraulic control panel 49 Stablizer 4 KVA for Enviroment control device

Key Value

Document Fees
INR 500 /-
EMD
INR 46000.0 /-
Tender Value
INR 23 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail