Works At Kushmandi Model School Hostel Plinth Protection, Boundary Wall,Tiles/Marbel Works, Electrification And Supply Of Utensils Of Hostel Room At Kushmandi Model School, Block- Kushmandi, Dist- Dakshin Dinajpur- 1 Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete.(Payment will be made on profile measurement beforeand after the work)(b) (i) With carried earth arranged by the contractor within a radius of 3 km.including cost of carried earth. 2 (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 3 Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. 4 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety 5 Brick work with 1st class bricks in cement mortar (1:4)(a) In foundation and plinth 6 b) In superstructure ground floor. 7 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. 8 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ground floor).(ii) With 1:4 cement mortar.(c) 15 mm thick plaster.(1:6) 9 (b) 20 mm thick plaster.(1:6) 10 Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. 11 M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and upto 16 Kg./sq. mtr. 12 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m(ii) Other than Coloured decorative including white 13 Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency] (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur pink / Udaypur Green / Black Bhaslana(ii) Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding 0.6 sq.m. 14 Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material.[Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5.a) 25 mm thick Tiles as per IS: 1237-2012 for footpath,ramp,staircase of public building(over 25 mm thick (Avg) Cement mortar (1:3) & Cement Slurry @ 4.4 kg/Sq.m at back side of Block. Cement for Mortar & Slurry to be supplied by Department).(ii) Coloured Decorative 15 Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturers specification.In Ground floor: (iii) Two coats. 16 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m(ii) Other than Coloured decorative including white 17 Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency] (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur pink / Udaypur Green / Black Bhaslana(ii) Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding 0.6 sq.m. 18 Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.A)For depth upto 150 metre for depth upto 150 Mtr. for 50 mm dia. tube well with top enlargement of 100 mm dia.a)100 mm. Dia. Boring etc. top enlargement 19 b)40 mm. Dia. Boring etc. 20 Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications.a)40 mm dia. 21 Supplying fitting and fixing reducing socket.a) (40 mm X 100 mm) 22 Supplying & Fixing Plug of approved make conforming to IS Specificationsa)40 mm dia. 23 Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).a)100 mm. dia. 24 b)40 mm. dia. 25 Supplying fitting & Fixing G.I. Cap at Top a)100 mm dia. 26 Supply & Packing of Coarse Sand 27 Supplying, installation and lowering in positionAC Submersible pumping machinery (preferably with stainless steel fabricated ciomponents) with cable & cable connector Kit,starter , overhead protection, Dry run protection, Auto Restart facility, Float Switch with Water Level Sensor, software for start-up of motors, making necessary connections with treatment units with supplyingG.IController boxand extrenal electtrical (GRID) connections with neccessary wiring,switch board and supplying 32mm dia.PVC column pipe 42m length as per direction of the EIC.i) Submersible pump capacity 1.0HP , 14 Stage, 32mm outlet dia (preferably oil filled) KSB/Crompton or renowed brand. 28 Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) 32 mm dia 29 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (vii) 25 mm dia 30 ALUMINIUM DEKCHI WITH LID-10-18G 31 ALUMINIUM DEKCHI WITH LID-20-51cm-14G 32 ALUMINIUM DEKCHI WITH LID-22-12G 33 ALUMINIUM DEKCHI WITH LID-24- I2G 34 STAINLESS STEEL THALA-12 dia 35 STEEL WATER JUG-5 LIT 36 IRON DABU HATA-42 X 8 BATY 37 IRON DABU HATA-48 X 8 BATY 38 IRON DABU HATA-4 BATY 39 IRON DABU HATA-6 BATY 40 IRON KHUNTI-42 HEIGHT 41 IRON KHUNTI-44 HEIGHT 42 IRON KARAI WITH HANDLE (WROUGHT)-20 43 IRON KARAI WITH HANDLE (WROUGHT)-34 44 G.I. WATER DRUM WITH LID-100L CAPA 45 GAS STOVE-COMMERCIAL USE-75 HEAD 46 PLAIN COT-AS PER PLAN 47 DINNING TABLE WITH BENCH-AS PER PLAN 48 MOSQUITO NET-3.5x5.5 49 PILLOW-Small Size 50 CRICKET SET-01 AND FOOTBALL-01 51 BED SHEET-for 3.5x 5.5 bed 52 MATRESS-3.5x5.5 53 WATER PURIFIER(Aquaguard Amrit 4000 Non-Electric Water Purifier-15L Storage)-AQUAGUARD 54 BLANKET 3.5x 5.5 55 SMALL TABLE 56 HIGH AND LOW BENCH-AS PER PLAN 57 COMMON ROOM CHAIR 58 TT BOARD-GOOD QUALITY 59 CARROM BOARD-GOOD QUALITY 60 GENERATOR SET-5kVA Kirloskar Diesel Generator 61 ELECTRIFICATION-ALL COMPLETE AS PER ESTIMATE
