|
| 1 | Demolition ofbrickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed. |
| 2 | M&L brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed. |
| 3 | All as per item No. 7 above but except brick.Note:Old bricks obtained against demolition shall be used. |
| 4 | M&L walling of random rubble stone masonry uncoursed, with best quality locally available harder stones such as granite, trap, basalt stone etc. well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 5 | All as per item No. 4 here-in-above but except stone.Note:Old stone obtained against demolition shall be used. |
| 6 | M&L raised pointing to random or polygoned rubble walling, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed. |
| 7 | Supply only 110mm bore PVC (SWR) pipes, single socket in any length as in weep holes complete all as specified and directed. |
| 8 | M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed. |
| 9 | Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed. |
| 10 | S&F rolled mild steel sections like angle, channel, flat etc as inframed work such as grills, gratings,etc,with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framed work of water tanks and similar work confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge. |
| 11 | Demolition of cement concreteunreinforced in ground floors, kota stone, granite flooring, tiles flooring,paver block andpavingsnot exceeding15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed byEngineer-in-charge. |
| 12 | M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels or drains etc. complete all as specified and directed. |
| 13 | M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.(inner girth only measured) |
| 14 | M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base flooring finished the surface even and fair without using extra cement complete all as specified and directed. |
| 15 | Dismantling and refixing machine pressed precast concrete interlocking paver block any shape and size complete all as specified and directed. |
| 16 | M&L sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 17 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size /shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 18 | M&L PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stop, rounded or chamdered on edge complete all as specified and directed. |
| 19 | M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 20 | M&L coloured tiels of size 400mm x 400mm x 12mm laid in floor or wall over 15mm thick screed bed in CM 1:4 with grey cement and pigment, any shape and size complete all as specified and directed. |
| 21 | Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed. |
| 22 | Rendering 15mm thick plaster in CM 1:4 on fair faces of brick/stone masonry surface or concrete surfaces of walls, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L prepartion of newly plastered surface of wall and applying three coats of white wash complete all as specified and directed. |
| 24 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground or lean concrete etc and making good to disturbed portion complete all as specified and directed. |
| 25 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 26 | Excavation post holes (or similar holes) in any type of soil each n exc 0.50 cu.m,getting out,returning,filling on and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25cm, complete all as specified and directed. |
| 27 | M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 28 | S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 29 | S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and strain- ing and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 30 | Restraining and resecuring including making good staples and tying with mild steel binding wire (wherever required) etc. in existing barbed wire fencing of any description complete all as specified and directed. |
| 31 | Supply only mild steel galvanised, chain link fencing size of any type 3 to 4 Kg per Sqm complete all as specified and directed. |
| 32 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed. |
| 33 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other ends, or screwed both ends each screw to be fitted with washer and one hexagonal or square nuts, length of bolt not exceeding 25mm long, diameter of shank 12mm, complete all as specified and directed. |
| 34 | M&Lpreparing new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 35 | M&L preparing old steel surfaces of any description over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 36 | M&L pre-cast cement concrete type B-1 1:2:4 (20mm graded crushed stone aggregate) as in landings, cover slabs for man holes,chullah hoods,chajjas,water troughs,mangers,shelves and similar articles with plain faces, set in CM 1:4 complete all as specified and directed. |
| 37 | S&F 450mm internal dia bore reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed. |
| 38 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for,complete all as specified and directed. |
| 39 | M&L RCC M-15 type B-1 (using 20mm graded crushed stone aggregates) in slabs supported to walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves including form work and the like complete all as specified and directed. |
| 40 | Form work to rough finished surfaces of concrete for soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 41 | S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 42 | S&F mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia in stirrups, spacer and binder for TMT bars complete all as specified and directed. |
| 43 | M&L cleaning and removing all scale and dirt etc. from tanks exc 250 & n exc 500 ltrs from mouth of circulating pipes etc. incl marking for date of cleaning of tank with paint complete all as specified and directed. |
| 44 | M&L cleaning and removing all scale and dirt etc. from tanks exc 500 & n exc 1000 ltrs from mouth of circulating pipes etc. incl marking for date of cleaning of tank with paint complete all as specified and directed. |
| 45 | S&F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm-142 gms/20mm - 210 gms/25mm-455gms/40mm-690 gms) complete all as specified and directed. |
| 46 | S&F tank nipple suitable for HDPE water tank (minimum weight 15mm-38gms/ 20mm-45gms/ 25mm-65gms) complete all as specified and directed. |
| 47 | M&L roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc. and applying/brushing neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and directed. |
| 48 | M&L broken stone or boulder hardcore of gauge n exc.63mm,deposited,spread and levelled in layers n exc,15 cm thick,watered and rammed to a true surface complete all as specified and directed. |
| 49 | M&L 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 50 | M&L 75mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 51 | M&L forming construction joint 30mm deep x 10mm wide filled with sealing compound grade \"B\" complete all as specified and directed. |
