|
| 1 | Construction of Examination Centre Block at Lucknow University, District-Lucknow. (Phase-4) |
| 2 | VRV AIR CONDITIONING WORKS |
| 3 | Supply,Installation, Testing and Commissioning |
| 4 | Ducted 11.0 TRUnit |
| 5 | Cassettes 3.8 TRUnit |
| 6 | Installation and commissioning of copper refrigerant piping complete with elbow band complete fittings size for 11.0 TR DUCTED units. |
| 7 | Installation and commissioning of copper refrigerant piping complete with elbow band complete fittings size for 3.8TR CASSETTES units. |
| 8 | Supply fabrication and installation of MS base frame for 11.0TR outdoor units complete with epoxy paintings, vibration isolation pads. |
| 9 | Supply fabrication and installation of MS base frame for 3.8TR outdoor units complete with epoxy paintings, vibration isolation pads. |
| 10 | PVC Drain water piping duly insulated, complete with fittings for ducted unit. |
| 11 | DUCTED UNITS 6 Core X 1.5sq.mmCopper Cable Make: Polycabe/KEI |
| 12 | Fabrication of G.I. Sheet Metal Rectangular Duct with supportsetc. |
| 13 | 22 gauge |
| 14 | 24 gauge |
| 15 | Canvas connection for Ducted units |
| 16 | Acqustic insulation with 9mm AccoFoam nitryal rubber. |
| 17 | Duct insulation with 9mm nitryal rubber. |
| 18 | Al.Powder coatedS/R Air Diffusers & Grills. |
| 19 | MS Volume Control collar Dampers |
| 20 | Lifting & Shifting of units |
| 21 | TUBEWELL BORING & PUMP |
| 22 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 400 mm dia |
| 23 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil 400 mm dia |
| 24 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.ection of Engineer -in-charge.200 mm nominal size dia |
| 25 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia |
| 26 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 27 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \"V\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 28 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia |
| 29 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp. |
| 30 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia. |
| 31 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 65 mm dia nominal bore |
| 32 | Installation of Pump Set 17.5 H.P. K.S.B. Make with 4\" M.S. Column Pipe Starter 12.5 H.P.V. Meter , A. Meter etc. complete. |
| 33 | Supply and fixing of nylon jali around the slotted pipes complete as required. up to 10 meter |
| 34 | Sypply and laying of alluminium conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt brick on sides and on top. On surface the cable run shall be fixed on m.s clamps etc. of suitable size or as directed by the Engineer in charge , complete in all respect . the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 35 SQ.MM 3-1/2 core |
| 35 | Water testing chemical and bactriological |
| 36 | FURNITURE WORK |
| 37 | Conference Table, Particle Board Edge Banded Top Size : W3000 X D1200 X H750, Model : CONFERENCE 2 (381) |
| 38 | Visitor Chair, Aluminium Cushion Arm, Chrome Plated Pipe Stand, Leatherette Tapestry. Model : GP 115 (134) |
| 39 | Metal Book Case, 4 Doors, Thickness 0.8mm,Size : W915 X D320 X H1750, Model : GMS 19 (700) |
| 40 | Steel Sloted Angle Rack, Size: W900 X D450 X H1800, Model : GMS 20 (710) |
| 41 | High Back Chair, Cushioned Chrome Arm, Chrome Base, Gas Lift, Synchro Knee Tilt, Leatherette Tapestry. Model : BRANDIS 1 (62) |
| 42 | Visitor Chair, Wooden Frame, Chrome Cushion Arm, Chrome Plated Pipe Stand, Leatherette Tapestry, Model: IBEX 3 (57) |
| 43 | Executive Table, PLPB Top, Extruded Aluminium Profile, Size :W2200 X D1850 X H750, Model:EVOKE 8 (307) |
| 44 | Back Storage Unit, 18mm PLPB, Extruded Aluminium Profile, Size : W2250 X D450 X H2200, Model : EVOKE 9 (308) |
| 45 | 3 Seater Sofa With Wooden Frame, Chrome Plated Leg, Leatherette Tapestry Size in mm - 2310 (L) X 900 (D) X 820 (H), Leatherette Tapestry, Model:LIDER 3 (431) |
| 46 | Centre Table, Toughened Glass, 12mm Thick, Chrome Plated Pipe Frame, Size :1200 x 600, Model : CLIFF (549) |
| 47 | Corner Table, 12mm Thick PLPB, Lower Shelf 12mm PLPB, Chrome Plated Pipe Frame With Chrome Castor, Size : Top Dia. 600mm X 500mm Bottom- 450mm, Model : LIZA 1 (555) |
| 48 | 13 PASSENGERS LIFT |
| 49 | Supplying,Installation ,Testing & Commissioning of 13 Passenger Elevators With AC ,VVVF drive,stainless steel door, and automatic power operated doors, ARD, with standard controls and operating divices for G+4 Floors. Travel distance/ Stops(Mtrs) 18m approx /5 Stops/5 Opening, 1.0 mps speed Including Lift License,and machine room, Free service for one year all Complete in all respect. |
| 50 | 2.0 TONS GOODS LIFT |
| 51 | Supplying,Installation ,Testing & Commissioning of 2.0 Tons Goods Elevators With AC ,VVVF drive,stainless steel door, and automatic power operated doors, ARD, with standard controls and operating divices for G+4 Floors. Travel distance/ Stops(Mtrs) 18m approx /5 Stops/5 Opening, 0.50 mps speed Including Lift License,and machine room, Free service for one year all Complete in all respect. |
| 52 | GST Extra as applicable |