Tender For Repair Work At Treasury Office, Fatehpur. - Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.As P, fatehpur-Uttar Pradesh

Tender For Repair Work At Treasury Office, Fatehpur. - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.As per DSR No. - 15.7.4 GST shall be paid extra as applicable at the time of payment. 2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) DSR Code No-15.2.1 GST shall be paid extra as applicable at the time of payment. 3 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or asapproved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR No.-15.60 GST shall be paid extra as applicable at the time of payment. 4 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (All kinds of soil) DSR No.-2.8.1 GST shall be paid extra as applicable at the time of payment. 5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources). DSR No-4.1.5 GST shall be paid extra as applicable at the time of payment. 6 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand). DSR no.-6.1.1 GST shall be paid extra as applicable at the time of payment. 7 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size). DSR Code No-5.3 GST shall be paid extra as applicable at the time of payment. 8 Supplying fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and Technical Specifications clauses 1002, 1010 and 1202. as per MR GST shall be paid extra as applicable at the time of payment. 9 Cement plaster 1:4 (1 cement: 4 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster. DSR no.-13.4.1 GST shall be paid extra as applicable at the time of payment. 10 Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepared the surface even and smooth complete etc. including all taxes labour, materials, T&P. As per DSR code-13.26 (2023) GST shall be paid extra as applicable at the time of payment. 11 Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound ) content less than 50 grams/ litre, of approved brand andmanufacture, including applying additional coats wherever required, toachieve even shade and colour. 2 Coats as per DSR 13.82.2 (2023) GST shall be paid extra as applicable at the time of payment. 12 Finishing with exteriors paints using Primer as per manufacturers specifications : Twocoats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm. DSR No.-13.47.1 GST shall be paid extra as applicable at the time of payment. 13 Painting with synthetic enamel paint two coats over previously painted old surface on door/window/channel etc. DSR No.-13.62.1 GST shall be paid extra as applicable at the time of payment. 14 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm as per DSR 9.51.1 GST shall be paid extra as applicable at the time of payment. 15 4 cm thick 1:2:4 plain Cement concrete flooring/roof treatment with cement, approved coarse sand of 2.5 F.M. and 2 cm graded approved stone grit laid in panels finished with 3 mm (1/8) floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour, tools and plants etc. required for proper completion of the work.(excluding glass strip). DSR No.-11.3.1 GST shall be paid extra as applicable at the time of payment. 16 Providing and fixing PVC wall panelling of all hights as per DSR No-26.96.1 GST shall be paid extra as applicable at the time of payment. 17 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR item no.-10.1 GST shall be paid extra as applicable at the time of payment.

INR 856 /-

INR 110000.0 /-

INR 11 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB