Tender For Maintenance Civil Works Assets At Ro Flt At Rms; 1 M&L 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers without using extra cement but using water proofing compound @ 3% by wt of cement and surface finished even and smooth including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed. 2 M&L for rendering 12 mm thick in CM (1:6) on other side of lathing, surface finished even and smooth without using extra cement complete all as specified and as directed. 3 M&L brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick work complete all as specified and as directed. 4 M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exceeding 6 m mean radius, built in Cement Mortar (1:6) including demolition of old brick work complete all as specified and as directed. 5 S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps. 6 M&L for second class hardwood as in scantlings clean sawn timberfixed including dismantling old timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and as directed. 7 Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) complete all as specified and as directed. 8 Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. 9 S&F Pressed steel door frames of size 125 X 60mm (Thickness of MS Sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,complete all as specified and as directed. 10 S&F factory made 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels complete all as specified and directed. 11 S&F for second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats complete all as specified and directed. 12 S&F Powder Coated aluminium colour frame for doors, windows, ventilators and partition etc with one or more rebates including joining cleat for fixing complete all as specified and directed. 13 S&F Powder Coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws complete all as specified and directed. 14 S&F for Powder Coatedaluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and directed. 15 M&L for sheet glass 3 mm thk Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. 16 S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and directed. 17 S & F 100 mm size stainless steel butt hinges complete all as specified and directed. 18 Supply & Fixing150 mm Aluminium handles, cast type, anodisedcomplete all as specified and directed. 19 S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 20 S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. 21 M&L for preparation of new plastered or un plasteredsurface of walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of primer complete all as specified and directed. 22 M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface complete all as specified and as directed. 23 M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying one coat of synthetic enamel paintcomplete all as specified and as directed. 24 M&L for preparation of newsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coats of synthetic enamel paint over a coat of redoxide primer on new surfaces in any tint complete all as specified and as directed. 25 M&Lfor preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed. 26 M&L preparation of old surfaces of wallsapplying one coat of cement base paint complete all as specified and as directed. 27 M&L for preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oilbound distemper on walls.all as specified and directed 28 Demolition of cement concreteof any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge. 29 M&L for 75 mm thick PCC (1:3:6) type C-2 , (using 40 mm graded stone aggregate) as in plinth protection laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed. 30 M&L for light shadevitrified ceramic tiles 9-10mm thick (Square / rectangular) of size 600mmx600mm each, in floors laid over and including 15mm thick screed bedin Cement Mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including demolition of old Stone slabs/tiles complete all as specified and as directed. 31 All as per Item No 30.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick backing coat in Cement Mortar 1:4. 32 M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,in floors laid over and including 15mm thick screed bed in cement mortar 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including demolition of old Stone slabs/tiles complete all as specified and as directed. 33 All as per Item No 32.00 (here-in-before) but on vertical surfaces such as skirting , dado, risers to stepsover and including 10 mm thick backing coat in Cement Mortar 1:4. 34 M&L for coloured glazed ceramic tiles in vertical surface of size 350x 250x 7 mm/ 450X 350X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat including dismantling of old tiles complete all as specified and as directed. 35 M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm,in floors laid over and including 15mm thick screed bed cement mortar 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including demolition of old Stone slabs/tiles complete all as specified and as directed. 36 All as per Item No 35.00 (here-in-before) but on vertical surfaces such as skirting , dado, risers to stepsover and including 10 mm thick backing coat in Cement Mortar 1:4. 37 S & F,Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. 38 S&F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification and drawing complete all as specified and directed. 39 M&L for cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed. 40 M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds 41 Demolition of cement concrete in reinforced of any description and in any position not otherwise specifically provided, complete all as specified & directed. 42 M&L for Cement concrete type B-1 (1:2:4), as in levelling course (using 20 mm graded stone aggregate), 40mm thick complete all as specified and as directed including demolition of old Cement concreteof any description complete all as specified and as directed by the Engineer-in-Charge. 43 M&L for PCC (1:4:8) type D-2, 75 mm thick (using 40 mm graded stone aggregate) as in sub base of floor including demolition of old Cement concreteof any description complete all as specified and as directed by the Engineer-in-Charge. 44 M & L for chequered cement concrete tiles of not less than 300mmx300mmx25mm thick any description jointed and pointed in neat cement slurry in floors with grey cement and pigment laidover and including 20 mm thick screed bed in CM (1:6) including demolition of old tiles & screedof any description complete all as specified and as directed by the Engineer-in-Charge. 45 M&L TMT bars, 6 to 8mm, cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and incl MS wire(annealed) not less than 0.9 mm dia complete all as specified and directed. 46 M&L for precast cement concrete type B-1, (1:2:4)(Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar 1:6 including necessary formwok complete all as specified and directed. 47 S&F in repairs of 15 mm bore GI tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors complete all as specified and as directed. 48 S&F in repairs of 20 mm bore GI tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors complete all as specified and as directed. 49 Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting for and pinning in ends of brackets including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed. 50 M&L in repairfor vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as specified and as directed. 51 M&L in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including Urinal spreader complete all as specified and as directed. 52 S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual fluash type complete all as specified(Make Cera, F1020106) complete all as specified and as directed. 53 S&F in repairs for 15mm dia of pipe CP bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 54 S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot or ‘Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. 55 S&F in repairs for 15mm dia of pipe stopvalves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixedcomplete all as specified and as directed. 56 S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers complete all as specified and as directed. 57 S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and as directed. 58 Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. 59 S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified and as directed. 60 S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws complete all as specified and as directed. 61 S&F in repairs looking mirror of size 450x600x5mm thick with aluminium frame and mounted on 6mm ply confirming to IS, with two Nos of hanging hooks complete all as specified and as directed. 62 S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed under floor complete all as specified and as directed. 63 S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed under floor complete all as specified and as directed. 64 S&F of 110mm dia PVC (SWR) bends omplete all as specified and as directed. 65 S&F 75mm PVC(SWR) bends any radius with acess door complete all as specified and as directed. 66 S&F of 75mm dia PVC (SWR) Vent cowl omplete all as specified and as directed. 67 S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. 68 S&F in repairs75 mm bore dia pipe Stack clamps ,made out of 50mm x 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete suitable for 75mm bore dia pipe all as specified and as directed. 69 S&F in repairs rotational moulded polyethylene 500 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I with and including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified anddirected. . 70 S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer boardE-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping including dismantling of old unsv ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any location complete all as specified and as directed. 71 M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished fair and even without using extra including taking down cement plaster complete all as specified and as directed. cement. 72 M&L for rendering 15mm thick in CM (1:4) other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including taking down cement plaster complete all as specified and as directed. cement. 73 Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. cement. 74 S & F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of old unsv sheet of any pattern or descriptioncomplete all as specified and as directed. 75 S & F Pre-painted galvatume aluminum zinc coated GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of old unsv sheet of any pattern or description complete all as specified and as directed. 76 M&L for rolled sections as in Roof trusses (framed), trussed, purlins,cleats etc. conforming to Fe 410 -W (Gde-E- 310) quality-Aincluding dismantling of old unsv wrought iron or mild steel work of any description complete all as specified and as directed. 77 M & L for PCC 25 mm thick type B-0, (1:2:4) (using 12.5 mm graded stone aggregate)as in levelling course of floor complete all as specified and as directed. 78 M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over 20mm thick screed bed in CM 1:3 complete all as specified and as directed. 79 S&F for5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed. 80 M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including dismantling of old unsv wall panelling (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any locationcomplete all as specified and as directed. 81 M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 82 S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers complete all as specified and as directed. 83 S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. 84 M&L for fixing 2 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all as specified and as directed. 85 S&F in repairs One Piece Closets vitreous china water closet Padestal pattern (white) including fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as specified and as directed. 86 S&F in repairs Brass CP mixer suitable for WHB for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm bore dia of pipe complete all as specified and as directed. 87 M&L for painting lines, dashes, arrows, letters, etc on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow complete all as specified and as directed. 88 M & L for water proofing treatment of roofs using Dr fixit roof seal classic waterproofing coating that provide a seamless and though waterproofing barrier for old roofs as under :-Method of application:(1) Prepare the surface thoroughly by cleaning & washing (2) Check the hollow portion and fill it with cement sand mixed with Dr fixit U.R.P.(3) Apply one coat of Dr fixit prime seal ( diluted 2 part of prime seal with 1 part water ) (4) Apply two coat of Dr fixit roof seal classic at interval of 8 hours cure for the period of minimum 7 days . 89 S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as specified and as directed. 90 M&L for Point wiring in repairs complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping/PVC Conduit pipe medium grade including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. of suitable size as required at site complete all as specified and as directed. 91 (a) Onelight /fan/exhausr fan controlled by one, one way switch. 92 (c) One 3 pin socket outlet 5 Amps on the same board with other switches. 93 (d) One 3 pin socket outlet 5 Amps on theIndependentboard. 94 All as per item No- 90.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. 95 S&F Switch piano flush type single pole, one way 5Acomplete all as specified and as directed. 96 S&F Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and as directed. 97 S&F Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and as directed. 98 S&F Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type complete all as specified and as directed. 99 S&F stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet complete all as specified and as directed. 100 S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. 101 M&L for sub main wiring Casing capingtwo run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand includingcasing caping complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of casing caping and its accessories of suitable size shall be measured as one unit length including taking down old unsv one all as specified and directed 102 M&L for sub main wiring Casing capingtwo run 2.5 Sq mm and one run of 2.5 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand includingcasing caping complete all as specified and as directed. NOTE:- Two runs of 2.5.0 Sq mm +one run of 2.5.0 Sq mm and one run of PVC casing caping and its accessories of suitable size shall be measured as one unit length.including taking down old unsv one all as specified and directed. 103 Supply and fixing in repairs LED flood light 120 wattcapacity with high luminous efficiency made up of epoxy powder coated pressure die cast aluminium housing with elegantly designed heat shrinkfor efficient thermal management, sturdiness and excellent corrosion resistant and lens embedded PC cover having top opening separate driver compartment with IP 66 protectionand high quality toughened glass IK07 with 10 KV built in surge protection device and all connected accessories including suitable size of serive bracket housing nuts and bolts etc and making electrical connection complete with driver and lamp complete all as specified and as directed. 104 S&F in repairsround shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. 105 S&F in repairs/replacement piano switch single pole 5A, one way complete all as specified and as directed. 106 S&F in repairs/replacement socket outlet 5 pin 6A, 230 volt flush type complete all as specified and as directed. 107 S&F in repairs/replacement switch socket combination 2 in 1, 3 pin 5 A Flush complete all as specified and as directed. 108 S&F in repairs/replacement switch socket combination 2 in 1, 3 pin 5 A/16A Flush complete all as specified and as directed. 109 S&F in repairs/replacement stepped type fan regulator 100/120 watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and as directed. 110 S&F in repairs 20W LED, 4, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting upwith flexible copper cable from ceiling rose complete all as specified and as directed. 111 S&F in repairs and testingof LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting complete all as specified and as directed. 112 S&F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size complete all as specified and as directed. 113 S&F in repairs Omini-directional elevated type high intensity runway edge light fittings suitable for use with 200Watt, 6.6A halogen lamp complete with all accessories including lamp, 360 degree outer and inner clean lens and filter etc including all electrical connectionwith suitable size copper conductor cable complete all as specified and as directed. 114 S&F in repairs 200 Watt 6.6A Bi-pin halogen lamp complete all as specified and as directed. 115 S&F in repairs 45 Watt 6.6A Bi-pin halogen lamp complete all as specified and as directed. 116 S&F in repairs lamp holder suitable for 200/45 W Bi-pin halogen lamp complete all as specified and as directed. 117 S&F in repairs MCB TPN 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB C series complete all as specified and as directed. 118 S&F in repairs MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacitycomplete all as specified and as directed. Note: MCB will be measured and paid separately. 119 S&F in repairs single pole and neutral enclosure with a two pin earth plug and socketcomplete with one single pole MCB SP 20 amp complete all as specified and as directed. 120 S&F in repairs MCB SPN 32 amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningcomplete all as specified and as directed. 121 S&F in repairs MCB SPN 40 to 63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C seriescomplete all as specified and as directed. 122 S&F in repairsMCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C series complete all as specified and as directed.
