Tender For Miscellaneous Civil Works In Factory Area; 1 Earth work in excavation in foundations, trenches, pits, areas including dressing of sides and ramming of bottom wherever, required, lift upto 1.5 M, getting out excavated earth, disposal of surplus excavated earth upto a lead of 10 M: 2 a) Soft/loose/hard/dense soil 3 b) Ordinary rock /Hard rock without blasting 4 Surface dressing of the ground including removinginequalities not exceeding 15 cm deep and disposal ofrubbish anywhere within plant area in soft/loose soil. 5 Filling available material vis. earth/sand/moorum/farm yardmanure/stone aggregate etc., and spreading, levelling thesame, watering and consolidation wherever required in pits, trenches, sides of foundations, flower beds/lawns, planted areas etc. as per directions of Engineer-in-Charge 6 Transportation of surplus earth, material, store items,garbage, plant construction debries, plants, saplings etc.,anywhere in factory area including loading, unloading towork site, dump yard as per the directions of Engineer-in-Charge,excluding spreading and levelling thedisposed off materials: 7 a) By truck / tractor trolley / hand cart on the basis ofmeasured work 8 By engaging tractor trolley of size 2.95 x 1.75 x 0.53 mtr including driver and 4 (four) number of labourwith tools and fuel for transportation of materials onthe basis of per day ( 8 hrs.) working 9 Supplying and stacking at site of following materials :Coarse sand,Fine sand,Moorum,Stone aggregate of approved quality 10 Providing and laying cement concrete in foundation,footing, sub bases of pavements, floors, beds excludingcost of centring and shuttering complete : 11 1:4:8 (1 cement:4 coarse sand: 8 graded stone aggregate40 mm nominal size) 12 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 13 Making plain cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20/12.5 mm size)parapet/banni upto 50 x 50 mm including centering andshuttering complete 14 Providing and laying reinforced cement concrete workexcluding centering, shuttering and reinforcement in a) Foundations, footings, rafts, columns, pedestals,plinth beams, manhole chambers,flooring,pavements etc. 15 i) 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20/12.5 mm size) 16 ii) 1:1.5:3 (1 cement : 1.5 coarse sand ; 3 gradedstone aggregate 20/12.5 mm size) 17 Providing and laying cement concrete in foundation,footing, sub bases of pavements, floors, beds excludingcost of centring and shuttering complete : 18 i) 1:2:4 (1 cement:2 coarse sand: 4 graded stoneaggregate 20/12.5 mm size) 19 ii) 1:1.5:3 (1 cement : 1.5 coarse sand ; 3 gradedstone aggregate 20/12.5 mm size) 20 Cutting , bending, hoisting and fixing in positionreinforcement for RCC work at all heights and depths(mild/ tor steel). 21 Providing, fixing and removing centring and shutteringincluding strutting, proping etc. complete:a) In foundations, footings, bases of columns, rafts, pavements etc. 22 Providing, fixing and removing centring and shutteringincluding strutting, proping etc. complete b) In super structure i.e. in columns, beams, cantilivers,shelves, slabs, landing, vertical/horizontal fins etc. 23 c) Making pockets upto 200x200x200 mm in RCC/PCC 24 d) -do- in Brick/stone work 25 Brick work with local bricks of class designation 50 infoundations and plinth in 1:6 mortar (1 cement: 6 coarse sand). 26 Brick work with local bricks of class designation of 50 insuper structure in 1:6 mortar (1 cement : 6 coarse sand). 27 Half brick masonary with local bricks of designation 50 infoundation and plinth in 1:4 mortar (1 cement : 4 coarse sand). 28 Randum Rubble Masonary with hard stone in foundation and plinth including levelling up with cement concrete 1:6:1220/12.5 mm size) at plinth level in cement mortar 1:6 ( 1 cement : 6 coarse sand).(1 cement : 6 coarse sand : 12 graded stone aggregare 29 15 mm thick cement plaster 1:6 ( 1 cement : 6 fine sand). 30 12 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 31 12 mm thick cement plaster 1:3 (1 cement : 3 fine sand)finished with a floating coat of neat cement. 32 6 mm thick cement plaster 1:3 ( 1 cement : 3 fine sand). 33 Repair of plaster in patches of area 2.5 sq.m. and underincluding cutting the patch in proper shape preparing andplastering the surfaces complete including disposal ofrubbish to dumping yard with cement mortar 1:4 (1 cement :4 fine sand). 34 Providing and laying white glazed/Vetrifiedtiles of min. thickness 5 mm on skirting, sides of steps, dados on 12 mm thick cement laster 1:3 (1 cement : 3 fine sand) and jointed with white cement slurry. 35 Providing and laying 25 mm thick kota stone in floor or inskirting over 20 mm thick cemenr sand morter (1 cement :4 coarse sand) including grinding polishing etc complete. 36 Only fixing of single layer monolithic cement concreteblocks in true line and level on ground level,as perdirections of Engineer-in-Charge. Pavement bocks shall besupplied by NFL free of cost at its stores. 37 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position: a) Second class Teak wood 38 b) Sal wood/or equivalent as approved by Engineer-in-Charge 39 Providing and fixing flush door shutters, decorative type, core of block board construction with frame of 1st class hard wood and well matched 1st class teak 3 mm ply veneering with vertical grains or cross bands and face veneers on bothface of shutters : 40 a) 35mm thick including anodised MS butt hinges withnecessary screws. 41 Providing and fixing glazed/wire gauge shutters for doors,windows,clerestory windows using 7.5 kg/sq.m. ( 3 mmthick) glasspanes/wire gauge including black enamelledM.S. butt hinges withnecessary screws: a) Second class teak wood 35 mm thick 42 Providing and fixing 12 mm thick, 150 mm wide pelmet of 19mm block board and 12mm thick commercial ply on top with20mm dia. M.S. conduit pipe, curtain rod including fixingwith 25x3 mm M.S. flat 10 cm long and plugs etc. complete. 43 Providing and fixing M.S. conduit curtain rods 20 mm dia. 44 Providing and fixing/replacing M.S. fittings of doorswindows with necessary screws (bright finished or blackenamelled) : 45 a) M.S. sliding door bolt 16 mm dia. x 300 mm long 46 b) M.S. tower bolt barrel type 150 x 10 mm 47 c) M.S. handle 100 mm /Hasp and staple 100 mm 48 d) M.S. casement stay 300 mm 49 e) M.S. window fastener 100 mm 50 f) M.S. butt hinges 100 mm x 58 x1.90 mm 51 Providing and fixing/replacing M.S. fittings of doorswindows with necessary screws (bright finished or blackenamelled) : 52 a) Sliding door bolt 16 mm dia. 300 mm long 53 b) Tower bolt 150 x 10 mm 54 c) Handle 100 mm/Hasp and staple 100 mm 55 Renewing old putty of glass panes (length) 56 Providing and fixing plywood plain lining with necessaryscrews/nails (no deductions for opening upto 0.25 Sq.M. shall be made) complete with : 57 a) Teak ply of approved brand (4 mm thick) 58 b) Commercial ply of approved brand (6 mm thick) 59 c) Commercial ply of approved brand : i) 12 mm thick water proof ply 60 Providing and fixing/replacing bright finished brass 100 mmmortice latch and lock with 6 levers and a pair of leverhandles with necessary screws etc. complete (best make of approved quality). 61 Providing and fixing/replacing aluminium hanging floor doorstopper anodised transparent or dyed to required colour &shade with necessary screws etc. complete. 62 a ) Providing and fixing/replacing bright finished hydraulic door closer (best make of approved quality) with necessaryaccessories & screws etc. complete : Right/Left/Universal type 63 Providing and fixing/replacing wooden cleats of size 100 x 75 x 50 mm to doors and windows with approved fittingsincluding removal of old cleats where necessary includingpainting, polishing or bees waxing to match the existing shade: Ist class kail wood cleats with iron hinges and screws. 64 Proving and fixing/replacing heat resistant sun control filmone side silvered and the other side transparent for fixing on window panes as per site requirement at all heights,including cleaning of surfaces complete. Imperfections like bubbling, crip, joints etc. in film fixed in one pane shall not be allowed as per directions of Engineer-in-Charge. Before start of worka sample shall be got approved. The film shall be of non-reflective range of GARWARE or equivalent quality. 65 Providing and fixing sunmica of approved quality with proper adhesive (fevicol etc.) including making surface wherever required. 66 Providing and fixing 19 mm thick block board non decorativetype with core of 1st class hard wood and well matchedcommercial ply veneering with vertical grains or cross bands and face veneers on both faces. 67 Providing and fixing galvenised MS wire gauge of averagewidth of aperture 1.18 mm with wire of dia. 0.56 mm indoors,windows or at any other place including necessarynails, screws etc. complete. 68 Supplying and applying antitermite solution on the existingwood work i.e. door frames,wall panelling,door shuterrs etc. 69 Providing and fixing Asbestos cement 6 mm thick sheetroofing at any height and fixing with GI - J or L hooks, boltsand nuts 6/8 mm dia., G.I. plain & bitumen washers complete excluding the cost of purlins, rafters and trusses, at any pitch. 70 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 71 Dismantling of A.C./GI sheet roofing at any height includingremoval of ridges,hips,valleys and gutters etc., and stacking the material within 50 metres lead and disposal ofunserviceable material in dump yard within plant area. 72 Rectification of AC/GI sheet roofing at any height by replacing damaged bitumen/GI washers and tightening the existing bolts, nuts & sealing all the holes with tarplastic compound to give full water proofing to the roof including all labour, tools tackles etc.and fixing of scaffolding wherever required at all heights (Allther materials required for the work shall be given free by NFL). 73 Fixing of AC sheets 6 mm thick/translucent sheets/GI Sheet in roofing/wall cladding at any height by providing and fixingG.I. - J or L hooks and nuts 6/8 mm dia. including plain andbitumen washers complete (only A.C. sheets/transluscentsheet/GI sheets will be supplied by NFL free of cost). 74 Supplying and applying Tarplastic Water proof putty ofapproved brand and manufacture, wherever required as per directions of Engineer-in-Charge. 75 Providing non asbestos high impact Polypropylene reinforced cement 6 mm thick corrugated sheets roofing upto any pitch and fixing with polymer coated J or L hooks bolts and nuts 6/8 mm dia. G.I. plain and Bitumen washers or with self drilling fasteners and EPDM washers etc. complete including cutting to size and shape wherever required. 76 Providing and fixing on wall face unplastcized Rigid PVCpipes conforming to IS 13592 Type A including jointingwith seal ring leaving 10 mm gap for thermal expansionSingle socketed pipes. (i) 75 mm diameter 77 (ii) 110 mm diameter 78 Providing and fixing on wall face unplastcized PVC mouldedFittings/acessories for unplastisized PVC rain water pipesconforming to 13592 Type A including jointing with seal ringleaving 10 mm gap for thermal expansion :-Coupler /Bend/Shoe i)75 - 110 mm 79 Providing and fixing/replacing white vitreous china watercloset squatting pan (Indian type) Orissa pattern W.C. pansize 580x440 mm. 80 Providing and fixing/replacing white vitreous china pedestaltype (European type/wash down type) water closet pan. 81 Providing and fixing/replacing 7.5 ltrs. low level P.V.C.flushing cistern with fittings complete. 82 Proving and fixing/replacing white vitreous china wash basin including making all connections but excluding the cost of fittings : flat back wash basin of size 630 x 450 mm. 83 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 84 Providing and fixing/ replacing C.P. brass waste for sinkor wash basin : a) 32 mm-40 mm dia 85 Providing and fixing/replacing 32 mm dia G.I. flush pipecomplete including cutting and making good the walls andfloors wherever required. 86 Providing and fixing/replacing 600 x 450 mm bevelled edgemirror of superior glass (of approved quality) completewith 6 mm thick asbestos cement sheet ground fixed towooden cleats with screws and washers. 87 Providing and fixing G.I. pipes complete with G.I. fittingsincluding trenching and refilling dismantling of wall and making good the same wherever required (internal/external work): 88 a) 15 mm nominal bore 89 b) 20 mm nominal bore 90 c) 25 mm nominal bore 91 d) 40 mm nominal bore 92 Dismantling G.I. pipes (external/internal work) includingexcavation and refilling trenches after taking out thepipes, including stacking of pipes within 50 mtrs. lead: a) 15 to 40 mm & Above nominal bore 93 Only laying G.I. pipe complete with G.I. fittings ( only pipe shall be supplied at NFL stores free of cost) : a) 15 mm to 25 mm 94 do-d) 40 mm to 150 mm 95 Providing and fixing brass ferrule C.I. mouth coverincluding boring and tapping the main: 20 mm nominal bore. 96 Providing and fixing/replacing plastic seat with lid forpedestal type W.C. pan with C.P. brass hinges, rubberbuffers etc., complete: a) Black/White plastic seat with lid 97 Providing and fixing/replacing unplasticised PVC connectionpipe with unions : 15 x 300 mm 98 Providing & fixing/replacing internal fittings complete set for : a) Low level flushing cistern including handle 99 Providing and fixing/replacing plastic floats for desertcooler / high level flushing cisterns , O.H.Tanks: a) For 15/20 mm 100 Providing and fixing/replacing G.I. fittings to G.I. pipe line i.e.Socket, elbow, Tee, plug, union, nipple etc. includingnecessary excavation-refilling/dismantling wall and makinggood the same wherever required : a) 15 -25 mm 101 do- -b) 40- 50mm 102 Providing and fixing/replacing brass stop cock/ Bib cock of approved quality : a) 15 mm - 20 mmnominal bore 103 Providing and fixing/replacing C.I. push cock/lift cock/bibcock of approved quality : 15 mm nominal bore. 104 Providing and fixing/replacing ball valve (brass) ofapproved quality complete : a) 15 mm to 20 mm nominal bore 105 Providing and fixing/replacing C.P. pillar cock/bib cockof approved quality / make : a) 15 mm 106 do -b) 15 mm swan neck pillar cock for laboratory sink 107 Providing and fixing/replacing brass full way valve withC.I. wheel of approved quality (screwed end) : a) 15 mm- 25 mm 108 - Do-b) 40 mm - 50 mm 109 -Do ---c) 80 mm 110 Erection of safety showers including making all connections and commissioning the same(safety showers & fittings shall be supplied free of charge by NFL). 111 Providing and fixing 100 mm CP mild steel sheet grating forgully, floor and Nahani trap. 112 Repair/maintenance of water supply and sanitaryfittings/fixtures including providing and fixing washers, jumper valves etc. wherever required for keeping the same in smooth operation without any leakage : a) High level/low level flashing cisterns of W.C./Urinalsb) Bib cock/stop cock/Pillar cock/Push cock/Lift cock and Ball Cock etc. of any size. c) Ball valve/Full way wheel valve any size ( d) Safety Showers 113 Providing and fixing PTMT (An Engineering thermoplastic)urinal spreader of approved quality, colour and make(prefereably PRAYAG INDIA SYMET) 15mm with size95x60x100mm with 15mm BSP threads and shape as perBIS specifications and approx. weight of 60 gms. 114 Providing and fixing/replacing internal PVC fitting for low level flushing cistern including side inlet valve lever type, out flow valve, front lifting arrangement and acessories for LLC adaptor & overflow pipe plus ball ISI mark- Superflow make : a) Single/Double syphonic system. 115 Providing and fixing/replacing white vitreious chinal flat back or wall corner type lipped front urinal basin of430x260x350mm and 340x410x256 mm size respectivelywith automatic flushing cistern with CI /MS brackets standard flush pipe and CP brass spreader with brass unions and GI clamps complete including painting of fittings and brackets, cutting and making good the walls and floors whereverrequired. a) 1 Urinal basin with 5 Ltr. PVC automatic flushing cistern. 116 DO----b) Range of two urinals basin with 7.5 Ltr. PVC automaticflushing cistern. 117 Providing and fixing stainless steel sink without drainageboard of approved quality and standard size includingCP waste, fixing the same on brackets etc. complete :size - 460 x 915 mm, bowl depth 178 mm. 118 Providing and fixing stainless steel sink with drainage boardof approved quality and standard size including CP waste, bowl depth 178 mm.fixing the same on brackets etc. complete : size 460 x 915 mm 119 Demolishing plain cement concrete work includingdisposal of material within 50 mtrs. lead. 120 Demolishing RCC work including stacking of steel bars anddisposal of unserviceable material within 50 mtrs. lead. 121 Demolishing brick work including stacking of serviceablematerial and disposal of unserviceable material within 50mtrs. lead in cement mortar. 122 Demolishing stone rubble masanory including stacking ofserviceable material and disposal of unserviceable materialwithin 50 mtrs. lead in cement mortar. 123 Dismantling old plaster or skirting, raking out joints andcleaning the surface for new plaster including disposal ofrubbish to the dumping ground within 50 mtrs. lead. 124 Renewing glass panes, with putty and nails or woodenfillets wherever necessary : a) Upto 3 mm- 4 mm 125 DO--d) Wired glass 5.5 mm 126 Repair/rectification/adjusting and maintenance of existingdoors, windows, ventilators and their fittings includingproviding and fixing necessary screws/nails etc. for smooth functioning of these fittings : a) Doors including locking bolts/tower bolt/handles/hinges b) Windows including locking bolts/tower bolt/handles/hinges c) Pelmets / curtain rods d) Hydraulic door closer including Oiling & Greasing 127 DO-- e) Fixing/removing and re-erecting name plates/displayboards/ Notice boards on walls/door shutters 128 f) Mortise lock repair/providing & fixing handles 129 Cleaning of water tanks including removal of sludge, algaeetc. ,washing, dis-infecting and again washing includingremoval & re-fixing of covers of overhead tank complete. 130 Inspection and making small repairs/rectifications offoundations, bolts of pumps, heavy equipments, floors etc.against vibration and other related minor maint. works ofwalls, floors, drains, outlet/inlet pipes, manholes, struc-tures, pedestals, tank foundations etc., and small seepagesrepair in toilet, roof and railing repairs, any othermasonary related job. 131 Removal of chockage of following sanitary installations forsmooth functioning: a) Floor trap/gully trap, water closet(European/Indian) wash basins, rain water pipes etc. 132 DO --b) Sewer lines from Manhole to Manhole 133 Cleaning of storm water drains in plant areas (with sizemeasured at bottom of drain) including uprooting of rankvegetation, removal of small debries etc., and disposal ofthe same in dump yard/anywhere within plant area : 134 a) Small drain upto 0.5 Mtr. Width 135 b) Drain upto 1 Mtr. Width 136 c) Drain more than 1 Mtr. width including final outletsupto boundary wall irrespective of the width of the drain 137 Sweeping of roof tops, against chocking of drain out pipes,roads, road junctions/turnings against slippage and otherfloor areas including collection of loose materials anddumping the same in dump yard within plant area. 138 Erecting/fixing in true line/level and plumb doors, windows,ventilators of steel or wood including chokhats upto 2.5 Sq. M. area including cartage of doors, windows, ventilators from stores to site of erection within NFL Estate. 139 Providing miscellaneous services of manpower for doingunmeasurable / unskilled day to day jobs of cleaning,helping and making arrangements for other misc. unforeseen jobs with all tools and tackles : per day for 8 hrs. working :Note:-In case the quoted rates for the below 02(two) items i.e. 141,142found less than that of below mentioned rates,party’s bid shall be rejected. 140 a) Carpenter/Plumber with one helper(Minimum rate to be quoted by bidder is Rs. 1516 else bid will be rejected) 141 c) Un-skilled labour(Minimum rate to be quoted by bidder is Rs. 700 else bid will be rejected) 142 Providing and laying marble stone flooring with 20 mm thickmarble stone over 20 mm average thick base and jointed with cement slurry including providing and mixing pigmentsincluding rubbing and granite polishing complete in cementmortar 1:4 ( 1 cement : 4 coarse sand) ; a) Bundi grey marble / Adanga Pink marble. 143 Providing and fixing mat finish good quality ceramic tilesof any size,pattern and colour of minimum thickness 8 mm on vertical/horizontal surfaces on a bed of 12 mm thick cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with grouting / pointing in white cement mixed with pigment to match the colour of the tile. 144 Providing and fixing square mouth SW gully trap grade Acomplete with CI grating, brick masonry chamber withbricks of class designation 50 and water tight CI cover with frame of 300x300 mm size (inside), the weight of cover should not be less than 4.5 Kg. and frame should not be less than 2.7 Kg. as per standard design, 100x100mm P Type. 145 Providing and fixing Fire Retardant Transluscent sheets inany shade (fixing to match with asbestos cement corrugated sheets) of approved make, made of polyster fibre-glass reinforced 1.2mm thick fixed in roofing and or wall cladding with necessary fixtures e.g. galvanised bolts,nuts, hooks etc. all complete as directed by Engineer incharge (wt. of sheet shall not be 6 ounce per sq.ft.). 146 Cleaning of road berms, islands. divider strips or anyother area and fine dressing the surface including cuttingof grass/wild growth with spade/scratching the areaincluding collection of fallen leaves/branches oftrees/bushes and any other foreign material, and removingof cut grass / loose materials from site of work to dumpingyard anywhere in NFL estate in connection with VIP visit. 147 Supplying and fixing of 40 mm thick rough chisel dressed Red Sand Stone flooring over 20 mm thick base with cement mortar 1 : 5 (1 Cement : 5 Coarse Sand) or Providing and fixing Red Stone Slabs on Top of drains as drain covers by joining the slabs with top of the drain wall with cement mortar 1 : 5 (1 Cement : 5 Coarse Sand) complete. ( Pointing of the joints of Red Sand Stone if required shall be paid separately ). 148 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).i. Light shade pigment using white cement 149 Cutting of Holes (CORE CUTTING) through Vibration less Core cutting method from the RCC roof slab /floor slab /walls of thickness upto 300 mm core diameter up to 200mm as per Directions of Engineer in Charge.All necessary cutting tools shall be under the scope of contractor. 150 Engaging Back Hoe Loader 3D excavator (JCB,CAT etc.)including driver,necessary tools,including fuel charges onthe basis of per day ( 8 hrs.) workingfor miscellaneous works i.e. excavation,dressing,dismanteling, lifting etc.as per directions of Engineer-In-Charge. 151 EngagingAir compressor/concrete breaker(Tractor/JCB Mounted) 250 cfm including driver, necessarytools,including fuel charges onthe basis of per day ( 8 hrs.)with two leads for pneumatic cutters / hammers for miscellaneous demolishing/dismantling jobs as per directions of Engineer-In-Charge.
