|
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed. |
| 2 | Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:6 finishing the surface even and fair without using extra cement complete all as specified and directed. |
| 3 | Rendering 15mm thick plaster on fair faces of brick masonry/concrete surface in CM 1:6, mixed with water proofing compound @ 2% by weight of cement and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 4 | Supply only integral water proofing compound complete all as specified and directed. |
| 5 | Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finishing the surface even and fair without using extra cement complete all as specified and directed. |
| 6 | M&L applying two coats of oil emulsion distemper on newly plaster surface of walls (tint as approved by Engineer-in-Charge) white sponge roller, including preparation of surfaces and priming with alkali resistant priming paint on 1-3mm thick wall care putty complete all as specified and directed. |
| 7 | M&L preparation of new surface of walls and applying two or more coats (tint as approrved by Engineer-in-Charge) with sponge roller, 100% premium acrylic emulsion paint having VOC less than 50 g m/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces incl exterior grade wall care putty 1-2mm etc., complete all as specified and directed. |
| 8 | M&L applying two coats of cement base paint on newly plastered or unplastered wall surface including prepartion of surface complete all as specified and directed. |
| 9 | M&L preparation of old plastered or unplastered surfaces of wall including cleaning by brooming down or with steel wire brushing, scrapping down smoke spot, moulds, moss and efflorescent salt and treating oil and greasy spots etc and applying one coat of white wash on old undecorated walls complete all as specified and directed. |
| 10 | M&L preparing old or previously treated ceiling surfaces by brooming down or with steel wire brushes, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceilings complete all as specified and directed. |
| 11 | M&L preparing old or previously treated wall surfaces by brooming down or with steel wire brushes, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on walls with sponge roller complete all as specified and directed. |
| 12 | M&L preparing old plastered wall surfaces and applying one coat of cement base paint complete all as specified and directed. |
| 13 | M&L complete removal of existing treatment including washing, rubbing down and stopping of white wash/colour wash/cement base paint/synthetic enamel paint etc and preparation of surfaces of the same walls and applying two or more coats (tint as appproved by Engineer-in-Charge) wiht sponge roller of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over surfaces incl exterior grade wall care putty 1-2mm upto three story building including necessary scaffolding complete all as specified and directed. |
| 14 | M&L preparation of old painted wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 15 | M&L preparation of old painted steel surfaces of any description not otherwise described over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | M&L applying two coats of french polish as required over a coat of wood filler on surfaces of any description, width or girth including cleaning and preparing the old surface complete all as specified and directed. |
| 17 | M&L writing letters, figures, index, arrows etc not exc 30cm in height using 1st quality synthetic enamel paint of colour as directed on walls incl oblitering old writing of any description with paint to match existing work complete all as specified and directed. |
