Tender For Annual Maintenance And Strengthening Of Electrical Works In Office Building Of Sector-19, 20, Fortres Office Sector-2 And City Magistrate Office Sector-19, Noida - 1 Wiring Point Of Light With 1.5 Sq.Mm Frlsh Pvc Insulated Multistrand Singl, noida-Uttar Pradesh

Tender For Annual Maintenance And Strengthening Of Electrical Works In Office Building Of Sector-19, 20, Fortres Office Sector-2 And City Magistrate Office Sector-19, Noida - 1 Wiring point of light with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy PVC conduit with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth drawn in side the conduit and paino type switch and ceiling rose angle / bettan holder 3mm thick phinolic laminated bakelite sheet etc. complete in all respects as per direction of E/I. as per P.S No. 121C. 2 Wiring point of Call Bellwith 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy PVC conduit with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth drawn in side the conduit and paino type bell push or 2 Pin socket etc. complete in all respects. as per P.S No. 125C. 3 Wiring point for fan / fresh air fan ( light duty exhaust fan ) with 1 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy PVC conduit with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth drawn in side the conduit and paino type switch and ceiling rose angle / bettan holder 3mm thick phinolic laminated bakelite sheet etc. complete in all respects as per direction of E/I. as per P.S No. 123C. 4 S/F of power plug with 15A/240V flush type switch and 5 pin 15 A/250V flush type universal socket in suitable M.S box of 175mm x 100mm x50mm size with phenolic laminated bakelite sheet cover 3 mm thick fixed with brass machine screw and cup washer. As per P.S No 1139. 5 Wiring point of light with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable ( drawn through existing concealed PVC conduit) with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside conduit and 5 Amp. flush type switch & ceiling rose/ angle/batten holder fixed with 3mm thick phenolic laminated backlite sheet with brass machine screws and cup washers mounted over existing M.S switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. P.S No. 174(C) 6 Wiring point of Call Bell Point with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable ( drawn through existing concealed PVC conduit) with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside conduit and 5 Amp. flush type switch & ceiling rose/ angle/batten holder fixed with 3mm thick phenolic laminated backlite sheet with brass machine screws and cup washers mounted over existing M.S switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. P.S No. 175(C) 7 Wiring point of Fan Point with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable ( drawn through existing concealed PVC conduit) with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside conduit and 5 Amp. flush type switch & ceiling rose/ angle/batten holder fixed with 3mm thick phenolic laminated backlite sheet with brass machine screws and cup washers mounted over existing M.S switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. P.S No. 177(C) 8 S/W of submain with 2 Nos. 2.5 Sqmm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit with 1 No. 1.5 Sqmm FRLSH PVC multistrand single core copper conductor cable as earth continuity wire drawn in conduit . complete in all respects as per P.S No. 1304C. 9 Supply and wiring of submain with 2 Nos. 4sqmm FRLSH PVC Insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty PVC conduit with 1 No. 2.5sqmm FRLSH PVC multistrand single core copper conductor Cable as earth continiuty wire drawn in conduit. PS No 216C. 10 Supply and wiring of submain with 2 Nos. 6sqmm FRLSH PVC Insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty PVC conduit with 1 No. 4sqmm FRLSH PVC multistrand single core copper conductor Cable as earth continiuty wire drawn in conduit as per PS No 217C. 11 Supply and wiring of submain with 2 Nos. 2.5 Sqmm & 1 No. earth wire of 1.5 SqmmFRLSHPVC Insulated 1100 V grade multistrand single core copper conductor cable in existing PVC Conduit complete, including supply of all material, labour and T&P etc. required for proper completion of the work as directed by Engineer in charge. PS No 291. 12 Supply and wiring of submain with 2 Nos. 4.0 Sqmm & 1 No. earth wire of 2.5 SqmmFRLSHPVC Insulated 1100 V grade multistrand single core copper conductor cable in existing PVC Conduit complete, including supply of all material, labour and T&P etc. required for proper completion of the work as directed by Engineer in charge. PS No 291A. 13 Supply and wiring of submain with 2 Nos. 6.0 Sqmm & 1 No. earth wire of 4.0 SqmmFRLSHPVC Insulated 1100 V grade multistrand single core copper conductor cable in existing PVC Conduit complete, including supply of all material, labour and T&P etc. required for proper completion of the work as directed by Engineer in charge. PS No 291D. 14 Supply and fixing of LED Tube Light with batten suitable for up to 1x22 watt LED tube light complete including tube etc. on surface complete in all respects. P.S No. 1413 Cat-AA. 15 S/F of 4 pole MCB 63A/415V havells make complete in all respects PS No. 1020A(10KA) Cat-A. 16 S/F of 5 Amp to 32 AmpSP MCB Havells make 10KA Complte in all respect as per PS No.- 1002 Cat-A. 17 S/F ofDPMCB 40 Amp Havells make complete in all respectsP.S No. 1010 Cat-A. 18 Supply & laying of Al. Conductor PVC Insulated armoured served sheathed cables 1100 Volt grade at a depth of below ground level over a cusion of 750mm below ground level over a cushion of 75mm. thick sand all round and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by the Engineer - Incharge, complete in all respect, the armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per PS No.-501 (Nicco,Grandlay, Havells,Kalinga, Skytone make) 19 i) 35 Sqmm x 3.5 core 20 ii) 70 Sqmm x 3.5 core 21 S/F of palm or pin type copper tin plated cable socket (lugs) to the cable leads, insulating with tape and making connection etc. complete in all respects as per direction of E/I. P.S No. 504. 22 i) 400 Sqmm 23 ii) 240 Sqmm 24 iii) 120 Sqmm 25 iv) 95 Sqmm 26 v) 70 Sqmm 27 vi) 35 Sqmm 28 Supply and fixing of 36 watt to 46 watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of special Polycarbonate meterial and driver set complete in all respect. PS No. 1406. Cat-AA. 29 S/F of 200 Amp. Four pole change over switch on 50mm x 50mm x 6mmAngle iron frame incl. the cost of labour T&P, Painting and other material required for proper completion of the work as per the direction and satisfaction of E/I.P.S.No 379. 30 S/F of 800 Amp. Four pole change over switch on 50mm x 50mm x 6mmAngle iron frame incl. the cost of labour T&P, Painting and other material required for proper completion of the work as per the direction and satisfaction of E/I.P.S.No 384. 31 S/F surface /flush mounting 4 Way TPN distribution board without MCBcomplete in all rescpect as directed at site by E/I. PS No 1026 Cat-A. 32 S/F of 200 Amp/ 415 V 4 Pole MCCB. Complete in all respects ( 32KA,P.S No. 1021(F) Cat-A 33 S/F of 6 - 32 AmpDP MCB (10KA) Havells make Complete in all respects as per direction of E/I as per PS No.- 1009 Cat-A. 34 S/F of Electronic Fan Regulator Dimmer,300/400 watt, ISI marked, on the existing switch board including making connectios,required material, labour T&P etc.for proper completion of work to the satisfaction of E/I.as per P.S No. 1203. 35 S/F of DPMCB 63A/415V havells make complete in all respects PS No. 1011(10KA) Cat-A. 36 S/F of sheet steel enclosure surface/ flush mounting fitted with 20 Amp. 2 pin and earth metal clad scrping earth plug and socket complete in all respects P.S No. 1031Cat-A. . 37 S/B of 600x600x6mm G.I plate vertically for earthing with its top at least 3 Mtrs. Below ground level complete with 20 mm dia G.I pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15 mm dia G.I pipe up to switch board ( from appron to switch board the cost of G.I pipe and G.I wire will be extra) 30cm square C.I frame with hinged cover masonry housing alternate layeres of charcoal / coke and salt at least 150mm thick alround etc. as per directions of E/I. complete in all respects as per drawing ( this will apply for earthing of poles also.) P.S No. 702. 38 Supply and laying of 20mm dia heavy duty (2mm thick) PVC conduit complete with bends and other acessories as required and 16 SWG fish steel wire etc. in slab alongwith reinforcement, before concreting and plastering etc. complete in all respects.P.S No. 281(A). 39 Supply and laying of 25 mm dia heavy duty (2mm thick) PVC conduit complete with bends and other acessories as required and 16 SWG fish steel wire etc. in slab alongwith reinforcement, before concreting and plastering etc. complete in all respects.P.S No. 282(A). 40 S/F of 11 KV TPMO Jai shree make 9 Nos. insulator of Relco make complete in all respects as per direction of E/I.(UPREC P-48) 41 S/F of out door type fuse set 11 KV Jai shree make insulator channel type Relco make complete in all respects as per direction of E/I. 42 Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 43 i) 5/6 A Switch (DSR - 2018/ 1.23.1) 44 ii) 15/16 A Switch (DSR - 2018/ 1.23.3) 45 iii) 3 Pin 5/6 A Socket outlet (DSR - 2018/ 1.23.4) 46 iv) 6 Pin 15/16 A Socket outlet (DSR - 2018/ 1.23.5) 47 v) Bell Push (DSR - 2018/ 1.23.8) 48 Supplying and fixingCall Bell / Buzzer suitable for single phase 230V, Complete as required.(DSR - 2016/ 1.38). 49 S/I/T and commissioning of 300mm dia 900 R.P.M Exhaust fan with louvered shutters. complete in all respects as per direction of E/I. 50 S/I/T and commissioning of 450 mm dia 1400 R.P.M Exhaust fan with louvered shutters. complete in all respects as per direction of E/I. 51 Supply and Fixing of 1200mm dia Ceiling Fan complete in all respects as per direction of E/I. 52 Supply and Fixing of 400mm dia decorative type bracket fan.( wall fan) complete in all respects as per direction of E/I. 53 Repairing of 63 KVA transformer incl. LV & HV coil, Gasket, fresh transformer oil , labour charger and painting complete in all respects as per direction of E/I. 54 Dismantling / Re.fixing of 63 KVA Transformer incl. loading unloading by crane etc. complete in all respects as per direction of E/I. 55 Supply of Fresh Transformer Oil complete in all respects as per direction of E/I. (AOR). 56 Supply and burring of 75 mm dia 3 Mtrs. long Electrode casted with maintenance free, conductive concrete, non corrosive mixture ( Ultra low Resistive carbon 0.001 ohm/mtr) in the ratio of 3:1:1 ( marconite: cement : water) on M.S Rod with hole ( 16mm diameter x 3 Mtrs) will be vertically installed for earthing with 1 Mtr G.I strip ( 25mm x 2.5mm) connected with SS nut bolt.The earth electrode will be installed into the 100mm pit up to 3000mm depth. nominal soil will be used as backfill material. Make: As approved in U.P.P.W.D & C.P.R.I Certified P.S No 729(C) 57 Repairing of 11KV Fuse wire/Jumper i/c supply & fixing of required size conductor, fuse wires of 11 KV Line / DP structure of Transformer by taking shutdown from UPPCL Department with all safety instruments like - safaty belt, Gloves , Shoes and other necessary items. (AOR)

INR 2124 /-

INR 56500.0 /-

INR 28.22 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB