|
| 1 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all other incidental charges complete true to the manufacturer\"s specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be suppliedby the contrr] e) (I) With application slurry @1.75 kg/ Sq.m, 20 mm sandcement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling withpigment.(A) Deep Colour & White Sq. M |
| 2 | Supplying, fitting & fixing polycarbonate sheet of approvedmake & brand conforming to IS: 14443-1997 and having 50 micron UV protection layer under co-extrusion technology, Fire rating being B-s1 as per EN13501-1 certification, fitted and fixed with 60mm wide aluminium channel section top and bottom member in dry-glaze sandwitch system, (unit wt. of top and bottom members: 0.375 kg/m & 0.69 kg/m) ofapproved brand and profile, EPDM quality rubber gaskets, anti dust tape, end closer \"C\" channel and 75 mm long Self tapping screw being drilled through the centre leg of the bottom section with nuts placed at 300 mm apart without anyway puncturing the polycarbonate sheet, EPDM Washer 16 mm dia & 3 mm thick washer etc complete strictly as per manufacturers specification and direction of Engineer-in-Charge. (Payment to be made on area of finished work) .In Roof:-Natural/ Blue/Green/Bronze/Opal/Metallic grey colourc)With 2 wall 10 mm overall thickness(wt.1.70kg/sqm,Ugvalue being 3.1 W/m2K, Min. cold bendingradius of 1200 mm) |
| 3 | (A) Providing and fixing of false ceiling with powder coated exposed G.I. gridsuspension system (E-Grid T 2430 or equivalent load carrying capacity with midspan deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c)consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long andWall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on theperimeter of the wall by steel screws with distance 300mm c/c. The Main Runnersto be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cutslots of Main Runner at regular interval of 600 mm to formmodular grid of1200mm X 600mm. Additional Cross Tees of 600 mm shall be placedperpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm diaG.I. wire from purlins / soffit. 6 mm thick High Pressure Steam Cured NonAsbestos Fibre Cement Standard Ceiling Board (Density > 1300 Kg/m3) of size595 mm X 595 mm, conforming IS 14862 & Type B Category III of ISO 8336,tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in theGrid module to form a False Ceiling. All complete as per the drawing &directions of Engineer-in-charge.In ground floor |
| 4 | Dismantling all types of plain cement concreteworks, stacking serviceable materials at site andremoving rubbish as directed within a lead of 75m.In ground floor including roof.(a) upto 150 mm. thick |
| 5 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominalsize) excluding shuttering and reinforcement,if any, in gound floor as perrelevant IS codes.Pakur variety |
| 6 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 7 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortarincluding rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortarb) 15 mm thick plaster |
| 8 | Reparing collapsible gate by cutting out all rivets as necessary reassamblingall members including welding pieces of channels,sraightening bent bars and rivetting with new rivets and fitting inposition and painting two coats. |
| 9 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sandpapering etc. |
| 10 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sandpapering etc. |
| 11 | A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the surface, if necessary a) On timber or plastered surface :With super gloss (hi-gloss) -iv) Two coats (with any shade except white) |
| 12 | Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With super gloss (hi-gloss) -iv) Two coats (with any shade except white) |
| 13 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:ii) 110 mm. Dia. |
| 14 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) completeB) UPVC Fittings:a) Plain Tee ii) 110 mm. Dia. |
| 15 | Supply,delivery,fitting fixing of Nilkamal /Green Soul/Cell Bell Visitor Chair(87 cm x 52 cm x 60 cm) |
| 16 | Add 18% GST (SGST-9% CGST-9%)(Payment to be made as per prevailing rules in vogue & as per actual executed ) (Item No. 1.01 - 1.40) |
| 17 | Add1% for labour welfare cess(Payment to be made as per prevailing rules in vogue & as per actual executed ) (Item No. 1.01 - 1.40) |
