Repairs And Periodical Services To Building Nos.843,842 And 53(Ng Section) Inside The Factory; 1 Repairs to wall plastering in patches of any size, in CM 1:4, 12mm thick, brick or stone walls, including taking down old cement or cement lime plaster, and finishing the surface to match the existing surface and one coat of Chalk whiting as priming coat etc complete as directed. 2 M & L for Distempering on wall with white or tinted Oil bound Distemper, 02 coats including preparatory works on old ceiling surfaces as directed. (Make: Asian / Dulux/ Nerolac as approved by the EIC to be used). 3 M & L for Painting on old steel surfaces exc 10 cm width or girth with two coats of Acid Resistant Paint of approved brand and manufacture of required colour to give an even shade including preparatory works as directed and as approved. 4 M & L for Painting on old wooden surfaces exc 10 cm width or girth with two coats of Acid Resistant Paint approved brand and manufacture of required colour to give an even shade including preparatory works as directed and as apporved. 5 M & L for Painting on old plastered surfaces with exceeding 10 cm width or girth Two coats of Acid Resistant Paint approved brand and manufacture of required colour to give an even shade including preparatory works as directed and as apporved. 6 M & L for Painting on steel surfaces of any description, with two coats of synthetic enamel paint and one coat of red oxide zinc chrome primer and preparation of old surfaces etc as directed. (Material : Reputed brands like Dulux, Asian Paints or Nerolac only acceptable) 7 M & L for Painting on wooden surfaces of any description, on old surfaces with two coats of synthetic enamel paint including one coat of zinc chrome primer and preparation of old surfaces etc as directed. (Material : Reputed brands like Dulux, Asian Paints or Nerolac only acceptable) 8 M & L for Finishing with Epoxy paint (two coats) prepared and applied as per manufacturers specifications including preparation of surface, etc. complete- on concrete / steel surface as directed. 9 Complete removal of Existing treatment on plaster wall surfaces and Finishing walls with one coat of exterior primer paints on plaster surface and two coats of Exterior emulsion paint, any colour, 10 M & L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work. 11 Writing letters, using thick enamel paint (Block, Roman, Italic or Indian) 15 cm high, as directed. 12 S & F of Asbestos cement sheeting 6mm tk. corrugated or semi corrugated of fixed with L hooks or cranked bolts in roofs, walls etc and dismentalling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings. 13 S & F of Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with coach screws. 14 Demolition of cement concrete n.exe 15 cm depth in floors. 15 Dismantling boarding, any description, fixed in any position with screws. 16 S & F of Weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed with Hardwood 2nd class as directed. 17 S & F of Anodised aluminium snap grid frame work for false ceiling all as specified Size of grid 605 x 605mm. 18 S & F of Non asbestos fibre cement building boards for false ceiling 6 mm tk., fixed or laid/ inserted to tember/ GI/ Aluminium framework with screws with two coats of Acid Resistant Paint including one coat of primer of approved brand and manufacture of required colour to give an even shade including preparatory works as directed and as approved. 19 M & L half round Asbestos cement eaves gutter of dia 228.6 mm with union sockets and joints set in approved jointing compound. 20 M & L for Asbestos cement eave gutter dia 228.6 mm Drop ends (with spigot or socket end) 21 M & L for Asbestos cement eave gutter dia 228.6 mm Stop ends (with spigot or socket end) 22 M & L for Asbestos cement Bends 150 mm dia pipe 23 M & L for Asbestos cement 150 mm dia sock-eted rain water pipes with cement joints 24 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories. 25 Rendering 15mm thick on fair faces of brickwork or concrete surfaces in C.M 1:4 in NG gutter line pedestal etc 26 M & L for Cement concrete 1:2:4 20mm graded aggregate including formwork(stright or curved) wherever necessary as directed. 27 S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapl. 28 M&L Plain fillets Exc 6 & n. Exc 13 sq.cm square, rectangular or triangular in section, clean sawn, se-cured nailing with the wooden cover in NG lead Gutter area and treated with creosote oiling one coat including preparatory work as directed. 29 M&L Hardwood 2nd class Planed one side with butt joints Boarding , 40mm thick supplied & fixed with nails in Cat Walk area and treated with creosote oiling one coat including preparatory work as directed. 30 M&L Hardwood 2nd class Planed one side with butt joints Boarding , 25mm thick supplied & fixed with nails in NG Lead Gutter cover and treated with creosote oiling one coat including preparatory work as directed. 31 Dismantling boarding, in Cat walk area and NG lead gutter area any description, fixed in any position with nails complete as directed. 32 S&F 2nd class hardwood Framed, ledgedbraced and battened shutters 40mm thick supplied and fitted to chowkats 33 M&L Timber fixed Clean sawn Second class hard-wood in scantlings in repairs, to replace old and decayed timber (including piecing,scarfing, etc., of old and new timbers if required) and removing defective portions to store 34 Taking down and Removing to Store Door Shutters of any description exc 2 sq. m each 35 M & L for Providing and Fixing Scaffolding system (cup lock type) on the exterior side & interior side, up to seven storey height made with 40 mm dia M.S tube 1.5 m centre to centre horizontal a vertical tubes joining with cup & lock system with M.S tubes , M.S challies , M.S Clamp & M.s stair system or any other system in the Scaffolding for working platform etc and maintenance it in a serviceable conditions for the required duration as approved and removing it thereafter. Scaffolding system shall be stiffened with bracing & runner connection with the building etc. whenever required for inspection of work at required location with essential safety features for the workmen etc . complete as per direction and approved of Engineer in charge. (The Payment will be made once irrespective of duration of scaffolding and based on area of scaffolding i.e length x height.) 36 M&L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6 ( 20mm graded aggregate), exc. 10 cm in width setting in cement mortar 1:4 complete 37 Demolition brickwork built in cement mortar or cement lime mortar 38 Demolition of Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) 39 Forming mortice holes, n exc. 50 cu cm for balusters, newels, rag-bolts, etc. And grouting with cement mortar 1:2 afterbalusters, etc. are fixed. 40 M & L for Balusters, square (40 x40mm Second class hard wood ) wrought and fixed, with ends housed (square or splay) to handrails and treads or strings. 41 M & L for Handrails rounded (75 x60mm Second class hard wood ) or shaped with splayed faces in straight lengths and fixed 42 Dismantling timber scantlings 40 sq. cm and over in section, in any position in fillets, ( unframed work ) rails, posts, rafters,purlins, etc. under 40 sq. cm in section. 43 Fixing only Rough cast wired glass,( exc. 0.5 but not exc 0.75 sq.m ) 6.4mm thick and glazing with oil putty in square. ( Except material ) 44 M & L for Pre-painted galvalume aluminum zinc coating GIbased Plain steel sheet 0.50mm thick for eaves gutter of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. 45 S & F of Flush shutters, 30 mm tk. solid core construction, with block board core and plywood face panels, commercial type on both sides. 46 Removing building materials etc. (other than spoil) to a distance exc 1 km n.exc 5 km the lead included in the rates, including loading, unloading and stacking at the destination 47 M & L for Air termination, single pointed aluminium rod 12mm dia and 300mm long. 48 M & L for Tubes, light grade galvanised, bore 40 mm with all fitting and fixed complete to walls and ceilings or laid in floors.
