Tender For Comprehensive Maint To Bldgs Of Group Vii Units Loc At Rms; 1 S & F Pre-painted galvatume aluminum zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of oldAsbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering /plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. 2 S & F Pre-painted galvatume aluminum zinc coated GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of oldAsbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering /plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. 3 S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) non asbestos fibre cement reinforced multipurpose board, pre-primetered self embossed, textured designer boardE-Board Classic fixed or laid/inserted to timber/ GI frame work with screws to be fixed in ceiling flat or sloping and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre both ways, size of grid 605 x 605mm fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any sizeincluding dismantling of old unsv ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any location complete all as specified and as directed. 4 S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed. 5 M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frameincluding dismantling of old unsv wall panelling (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any locationcomplete all as specified and as directed. 6 M&L for second class hardwood plain fillets exc 13sqcm and notexc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads complete all as specified and as directed. 7 S & Fin repairs 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws (fixing in existing timber frame work) complete all as specified and as directed. 8 S&F in repairs prelaminated particle board 19mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination as in pelmet boxes or in narrow widths not exceeding 15 cm each, rebated or flat edged including 6mm thick teak wood lipping allround complete all as specified and as directed. 9 M&L brick work with sub class B bricks (using old size burnt bricks) straight or curved on plan exc 6 m mean radius in CM (1:4) built in CM (1:4) including demolition of old brick work complete all as specified and as directed. 10 M&L brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick work complete all as specified and as directed. 11 M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) using water proofing compound @ 3% by wt of cement for finished even and smooth (without using extra cement) including taking down old cement plaster complete all as specified and as directed.Note:-WPC will be measured and paid separately. 12 M&L 10 mm thick plastering in CM (1:6) onthe other side of lathing finished even and smooth without using extra cement complete all as specified and as directed. 13 M&L 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers without using extra cement using water proofing compound @ 3% by wt of cement for finished even and smooth including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including provision of GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed.Note:-WPC will be measured and paid separately. 14 Supply only Integralwater proofing compound complete all as specified and as directed. 15 M&L for preparation of new plastered surfaces ofwall and applying two coats of oil emulsion distemper over and including a coat of primer overwall care putty (1.5mm thick in two layers) on wall surfaces complete all as specified and as directed. 16 M&L for applying two coats of oil bound distemper over and including a coat of primer on new plastered surfaces of walls including preparation of surface complete all as specified and as directed. 17 M&L for preparation of new plastered surfaces and applying two coats ofcement base paint over and including a coat of primerof approved shade on walls complete all as specified and as directed. 18 M&L for preparation of olddecorated plastered surface of any description and applying one coat of plastic emulsion paint complete all as specified and as directed. 19 M&L for complete removal of exisitng treatment of old decorated surfaces ofwall applying two coats of oil emulsion distemper over and including a coat of primer over coat of wall care putty(1.5mm thick in two layers) for obtained smoothness of wall surfaces complete all as specified and directed. 20 Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 21 M&L for 75 mm thick PCC (1:3:6) type C-2 , (using 40 mm graded stone aggregate) in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed. 22 M&L for cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed. 23 M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms mouldscomplete all as specified and as directed. 24 M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and as directed. 25 M&L for PCC (1:3:6) type C-1(using 20mm graded stone aggregate) as in coping including necessary formwork complete all as specified and as directed. 26 M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar (1:6) etc, set, jointed and pointed in neat cement slurry with grey cement and pigments including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed. 27 M & L for PCC (1:4:8) type D-2, 100 mm thick (using 40 mm graded stone aggregate) as in hardstanding complete all as specified and as directed. 28 M&L for light shade/coloured vitrified ceramic tiles 9-10mm thick (Square / rectangular) of area exc 0.36 sqm but not exc 0.42 Sqm each, in floors laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles includingdismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 29 M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm,in floors laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles includingdismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 30 All as per Item No. 29.00 (here-in-before) but on vertical surfaces such as skirting, dado, risers to stepsover and including 10 mm thick bedding layer in CM (1:4). 31 M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,in floors laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles includingdismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 32 M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile laid over and including baking coat of 10 mm thick in CM (1:4)includingdismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 33 M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floors laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles includingdismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 34 M&L for rubber moulded glossy finished, machine pressed precast conctete interlocking paver block with grey cement and no pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid complete all as specified including preperation of formation bed over and including 25 mm thick sand cushioning includingdismantling of oldpaver block complete all as specified and as directed. 35 M&L for second class hardwood as in scantling as in purlins rafters & framed worketc clean sawn including dismantling old timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and as directed. 36 S&F for joist, channels, angles, or tee sections, fixed independently, without connecting plates, etc, (cut to ordinary length i.e. within 20mm of the length indicated) conforming Fe-410-W (Gde E-250 quality -A) including dismantling of wrought iron or mild steel work of any description complete all as specified and as directed. 37 M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-Aincluding dismantling of wrought iron or mild steel work of any description complete all as specified and as directed. 38 S&F Plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W (Gde-E-250 quality-A)including dismantling of wrought iron or mild steel work of any description complete all as specified and as directed. 39 S&Fsteelworkintubulartrusses, post, purlinsincludingspecialshapedwasheretc.CompleteusingERWorinductionbuttweldedtubesconformingtoIS1161-1979gradest-240 including dismantling of wrought iron or mild steel work of any description complete all as specified and as directed. 40 Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specifed and as directed. 41 Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specifed and as directed. 42 Taking down shutter not exceeding 1 Sqm each complete all as specifed and as directed. 43 Taking downshutter of any descriptionexceeding 1.0 Sqmnexc 2Sqm each complete all as specifed and as directed. 44 S&F anodised aluminium powder coated any colour as in frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as specifed and as directed. 45 S&F for anodised aluminium powder coated any colour as in window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/mincluding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. 46 S&F for anodised aluminium powder coated any colour as in door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats, glazing clips, rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw complete all as specifed and as directed. 47 S&F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane complete all as specifed and as directed. 48 S & F for galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.14mm fixed with tinned tack of wire staple complete all as specifed and as directed. 49 M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and directed. 50 S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides but with partical board side complete all as specifed and as directed. 51 M&L for Granite (of any type) tiles 18-20mm thick as in platform machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigmentto match the shade of granite stone including grinding and polishing with nosing laid over and including 20 mm thick screed bed in CM (1:4) complete all as specifed and as directed. 52 S&F 35 mm thick 2nd class hardwood plain framed Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated ,supplied and fitted to chowkats complete all as specified and as directed. 53 M&L for35mm thick 2nd class hard woodGlazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified and as directed. 54 M&L for 30mm thick 2nd class hard woodGlazed and skeleton window and ventilator shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and as directed. 55 M&L for 30mm thick 2nd class hard woodGlazed and skeleton window and ventilatorshutter, open rebated and prepared to receive glass, gauge etc.with plain chamfered or rounded, mitred and rebatedwithout sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and as directed. 56 S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. 57 S&F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification complete all as specified and as directed. 58 S&F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and as directed. 59 M&L rolled miled steel work Fe 290 (Gde E-165 ) for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. 60 M&L for PCC (1:2:4), type B-0, (using12.5 mm graded stone aggregates) as in bands, bed blocks, fixing hold fasts, filling of door frames etc complete including necessary formwork complete all as specified and as directed. 61 S&F for mild steel conforming to Fe 410-0 or Fe 310-0 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; hand made sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles complete all as specified and as directed. 62 S&F 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR typeadhesive, fixed with screws to timber frame work in cup board shutters, partitions, shelves and similar work with teak wood beading at the edges complete all as specified and as directed. 63 S&F 40mm width Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed. 64 S&F butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm long size complete all as specified and as directed. 65 S&F butt hinges, medium weight 75 mm long sizecomplete all as specified and as directed. 66 S&F Butt hinges, medium weight, cold rolled mild steel, 50mm size complete all as specified and as directed. 67 S&F continuous (Piano) hinges mild steel30 mm width bright finish or electro galvanised complete all as specified and as directed. 68 S&F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long complete all as specified and as directed. 69 S&F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long complete all as specified and as directed. 70 S&F 150mm long aluminum hook and eye, complete all as specifed and directed. 71 S&F Aluminium handle cast type anodised 150 mm long complete all as specified and as directed. 72 S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long) 73 S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete specified and directed 74 S&F Aluminium, anodised, barrel tower bolt 150mm longof extruded section and fixed complete all as specifed and directed. 75 S&F 40 mm cupboards knobs fixed with nut screw and washer of mild steel, bright finished complete all as specifed and directed. 76 S&F in repairs Mortice lock,vertical type Brass 2 levers, size 100 mmcomplete all as specifed and directed. 77 S&F in repairs Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws 100mm size complete all as specifed and directed. 78 S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers complete all as specifed and directed. 79 S&F in repair for aluminium (extruded section) bodydoor closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. 80 S&F in repair floor door stopper overall length of cover plate 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specifed and directed. 81 S & F double action floor springhydraulically regulated made upof minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specifed and directed. 82 S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work complete all as specifed and directed. 83 M & L 25mm thick second class hard wood boarding , plained one side with butt joints as ineaves boards including dismantling of old boarding complete all as specified and as directed. 84 M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified and as directed. 85 M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 86 Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing and refixing in same or other locationcomplete all as specified and as directed. 87 Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing and refixing in same or other locationcomplete all as specified and as directed. 88 S&F in repairstubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore complete all as specified and as directed. 89 S&F in repairs tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore complete all as specified and as directed. 90 S&F in repairs vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed. 91 S & F in repairs vitreous china bowl urinal flat back of size 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. 92 S&F in repairs vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed. 93 S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Seat cover complete all as specified and as directed. 94 S&F in repair PVC low level flushing cistern 10 ltr capacity syphonic action type white body with MS bracket,inlet ball valve, floathandle and flush pipe (for EWC or WC)complete all as specified and as directed. 95 S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 96 S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot or ‘Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. 97 S&F in repairs for 15mm dia of pipe stopvalves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixedcomplete all as specified and as directed. 98 S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers complete all as specified and as directed. 99 S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and as directed. 100 S&F in repairs CP wall mixer (3 in 1) complete all as specified and as directed. 101 S&F in repairs CP Central hole basin mixer fancy type 15mm dia complete all as specified and as directed. 102 S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and as directed. 103 Supply and fixing of soap-dish chromium plated complete all as specified and as directed. 104 S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified and as directed. 105 S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed under floor complete all as specified and as directed. 106 S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. 107 S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and as directed. 108 S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. 109 S&F of 110mm dia PVC (SWR) bends complete all as specified and as directed. 110 S&F of 110mm dia PVC (SWR) coupler complete all as specified and as directed. 111 S&F of 110mm dia PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and as directed. 112 S&F of 110mm dia PVC (SWR) junction double, (double T), equal or unequal complete all as specified and as directed. 113 S&F 75mm PVC(SWR) bends any radius with acess door complete all as specified and as directed. 114 S&F 75mm PVC(SWR) bends any radius complete all as specified and as directed. 115 S&F of 75mm dia PVC (SWR) Vent cowl complete all as specified and as directed. 116 S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. 117 S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof suitable for 75mm bore dia pipe complete all as specified and as directed. 118 S&F in repairs cast iron or mild steel Hat pegs and coat hooks, solid body, 175mm to 250 mm complete all as specified and as directed. 119 Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. 120 S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and as directed. 121 S & F sheet glass 4mm thick ordinary quality and glazing with oil putty / beads in square not exc 0.50 Sq.m in each pane,including hacking out old broken glass of any thickness size or description from wooden frames or metal frames complete all as specified and as directed. 122 S & F sheet glass 4mm thick ordinary quality and glazing with oil putty / beads in square exc 0.50 Sq.m in each pane, complete all as specified and as directed. 123 S & F 4mm thick figured glass panes pinheaded and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and as directed. 124 S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and as directed. 125 S&Ffor galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. 126 S&F in repairs, galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. 127 M & L for roof treatment (for staircase/tank portion of bldgs) including the following :-(i) Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.(ii) M & L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in top of roof.(iii) Screed bed or bedding layer 15mm thick layer of cement mortar 1:4and surface finished evern and smooth without using extra cement.(iv) Applying evenly a tack coat of industrial bitumen 85/25 @1.2 kg per sqm including cleaning surfaces.(v)APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric laid on primed surface by forced application complete all as specified 128 M&L for disconnecting existing tanks capacity exceeding 500 Ltr & not exceding 1000 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position complete all as specified and as directed. 129 S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete suitable for iron pipe of 20 mm dia including dismantling of old water tank complete all as specified and as directed. 130 S&F 10 mm thick solid PVC insulation panels placed in false ceiling , fixed with screws in ceiling over and incluiding GI grid frame work including taking down old panels and complete fixing arrangment as per specification complete all as specified and as directed. 131 M&L for Point wiring in repairs complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping/PVC Conduit pipe medium grade including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators suitable size as required at site complete all as specified and as directed. 132 Onelight controlled by one, one way switch. 133 One Ceiling fan/ Exhaust fan point controlled by one, one wayswitch. 134 One 3 pin socket outlet 5 Amps on the same board with other switches. 135 One 3 pin socket outlet 5 Amps on the Independent board 136 One bell pointcontrolled by one, one way switch . 137 All as per item No-133.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. 138 S&F Switch Piano, flush type single pole, one way 5 Amps complete all as specified and as directed. 139 S&F Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and as directed. 140 S&F Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and as directed. 141 S&F Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type complete all as specified and as directed. 142 S&F stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet complete all as specified and as directed. 143 S&F in repair ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and as directed. 144 S&F in replacement of Bell AC 230 volts musical type complete all as specified and as directed. 145 S&F in repair bell push switch 5 amps piano type flush typecomplete all as specified and as directed. 146 S&F in repairs 20W LED, 4, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting upwith flexible copper cable from ceiling rose to the light fittingcomplete all as specified and as directed. 147 S&F in repairs 09 W LED, 2, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting upwith flexible copper cable from ceiling rose to the light fittingcomplete all as specified and as directed. 148 S&F in repairs Lamp holder , PVC/ Polycarbonate type with PVC round/square block for lamp holder complete all as specified and as directed. 149 S&F in repairs LED lamp 9 Watt suitable for lamp holder fittings complete all as specified and as directed. 150 S&F in repair and testing of vertical type wall mounted storage water heater of Capacity 25 Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technologyfor inner tank with incoloy heating elementwith minimum4 years warranty , ABS outer body , 2 units of PVC connection pipe with length of 450mm length for hot and cold water supply with complete Accessories complete all as specified and as directed.Note:-Old wall mounted storage water heater shall be deposited to MES AGE(E/M) Store 151 S&F in repairs/replacementModular Switch 1 way 6A,1 module complete all as specified and as directed. 152 S&F in repairs/replacement modular switch 1 way 16A, 1 modulecomplete all as specified and as directed. 153 S&F in repairs/replacement Modular Socket ,6A/2/3 pin combined 2 module complete all as specified and as directed. 154 S&F in repairs/replacement Modular Socket ,6A/16A-2/3 pin combined 2 module complete all as specified and as directed. 155 S&F in repairs/replacement stepped type electronic fan regulator,120 W-2 module complete all as specified and as directed. 156 S&F in repairs/replacement modular white cover plate with frame 1/2 module complete all as specified and as directed. 157 S&F in repairs/replacement modular white cover plate with frame 3 module complete all as specified and as directed. 158 S&F in repairs/replacement modular white cover plate with frame 6 module complete all as specified and as directed. 159 S&F in repairs/replacement modular white cover plate with frame 8 module complete all as specified and as directed. 160 S&F in repairs/replacement piano switch single pole 5A, one way complete all as specified and as directed. 161 S&F in repairs/replacement switch socket combination 2 in 1, 3 pin 5 A Flush complete all as specified and as directed. 162 S&F in repairs/replacement switch socket combination 2 in 1, 3 pin 5 A/16A Flush complete all as specified and as directed. 163 S&F in repairs/replacement socket outlet 5 pin 6A, 230 volt flush type complete all as specified and as directed. 164 S&F in repairs/replacement fan regulator 100/120 wall step type AC 220 volt complete all as specified and as directed. 165 S&F in repairs PVC switch board 10x12 suitable for switch socket complete all as specified and directed. 166 S&F in repairs PVC switch board 8x10 suitable for switch socket complete all as specified and directed. 167 S&F in repairs PVC switch board 8 x 6 suitable for switch socket complete all as specified and directed. 168 S&F in repairs PVC switch board 7x4 suitable for switch socket complete all as specified and directed. 169 S&F in repairs PVC switch board 4 x 4suitable for switch socket complete all as specified and directed. 170 S&F in replacement of PVC cassing & caping 25 mm complete all specified and as directed. 171 S&F in replacement of PVC cassing & caping 32 mm complete all specified and as directed. 172 M&L for replacement of PVC conduit 20mmcomplete all as specified and as directed. 173 M&L for replacement of PVC conduit 25mmcomplete all as specified and as directed. 174 S&F in repairs for engagement LED 0.5w light red, green, complete all as specified and as directed. 175 M&L for sub main wiring two run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand includingcasing caping complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of PVC casing caping and its accessories of suitable size shall be measured as one unit length including taking down old unsv one complete all as specified and directed. 176 M&L for sub main wiring two run 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand includingcasing caping complete all as specified and as directed. NOTE:- Two runs of 6.0 Sq mm +one run of 6.0 Sq mm and one run of PVC casing caping and its accessories of suitable size shall be measured as one unit length including taking down old unsv one complete all as specified and as directed. 177 Supply and fixing repair PVC Exhaust fan 200 mm sweep single phase 50 Hz AC, air flow rate of including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified anddirected by Engr-in-Charge. Note : Old Exhaust fan shall be deposited to MES AGE(E/M) Store 178 Supply and fixing repair PVC Exhaust fan 250 mm sweep single phase 50 Hz AC, air flow rate of including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified and as directed. Note : Old Exhaust fan shall be deposited to MES AGE(E/M) Store 179 S&F in repairs MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and suitable for fixing MCBs of various rating capacitycomplete all specified and as directed. 180 S&F in repairs MCB TPN 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB C seriescomplete all specified and as directed. 181 S&F in repairs MCB Distribution board double door type SPN 8 Way, sheet steel, powder painted, withneutral link & earth bar etc. and suitable for fixing MCBs of various rating capacity complete all specified and as directed. 182 S&F in repairs MCB Distribution board single door type SPN 2 way, sheet steel, powder painted, withneutral link & earth bar etc. and suitable for fixing MCBs of various rating capacity complete all specified and as directed. 183 S&F in repairs MCB SPN 32 amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningcomplete all specified and as directed. 184 S&F in repairs MCB SPN 40 to 63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB Cseries 10KAcomplete all specified and as directed. 185 S&F in repairs MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C seriescomplete all specified and as directed. 186 S&F in repairs 20W LED 4 tube Rodfor Single side connection suitable batten light fitting complete all specified and as directed. 187 S&F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size complete all specified and as directed. 188 S&F in repairs round shape 6/10 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all specified and as directed. 189 S&F in repairsUtra slim LEDPanel square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all specified and as directed. 190 S&F in repairs wall Picture light, 7 Watt, bronze finish for superior feel long life LED light source warm 3000k with good colourcomplete all specified and as directed. 191 S&F in repairs decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lampwith B-22 base complete all specified and as directed. 192 S&F in repairs and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting complete all specified and as directed. 193 S&F in repairs cordless wireless digital doorbell complete all specified and as directed. 194 S&F in repairs flexible copper wire 23/76 wire complete all specified and as directed.
