Tender For Providing Waiting Shed, Additional Kitchen And Paver Block Flooring At Ward No.06, Community Hall, Main Road In Vikravandi Town Panchayat, Villupuram-Tamil Nadu

Providing Waiting Shed, Additional Kitchen And Paver Block Flooring At Ward No.06, Community Hall, Main Road In Vikravandi Town Panchayat , Providing And Laying, Spreading And Compacting Graded Stone Aggregates To Wet Mix Macadam 250Mm Thick Specification Including Premixing The Materials With Water At Omc In Mechnanical Mix Plant Carriage Of Mixed Material By Tipper To Site Laying In Uniform Layers With Pavers In Sub Base/ Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Acheive The Desired Density Including Cost Of Material, Labour Charges, Rentals For Machinery, Fuel And All Other Incidental Charges Etc.,Complete As Per Clause 406 Of Morth , Supplying And Laying Precast Designer Paver Block Confirming To Is 1568-2006 Specification Manufacturing And Laying Standard Of M50 Grade 80Mm Thick (Table Clauses 5 And 9.14) Suitable For Bus Terminals Industrial Complexes Road On Expensive Soils Etc., Including The Cost Of Paver Block Of Size 225Mm X 12.50 Mm X 80Mm And Conveyance Of Materials To Work Site Mentioned In The Tender Schedule Cost Of Loading And Unloading Handling During Over Stone Dust Of 100Mm Thick (Excluding The Cost Of Sand) Conveyance Paver Block Cutter To Site And Hire Charges Of Vibrators And Block Cutter Operator And Labour For Leveling The Sand To Paver Block Etc., Complete Isi 15658-2006. , Supplying, Fabricating, Erecting Structural Steel Work For Roofing Welded Or Bolted Type Using Ms Channels, Angles, Plates And Round Bars Etc. Conforming To Is Specification Including Primer Coating And Enamal Painting As Per Design Given By The Departmental Officers Etc, Complete As Per Standard Specification , Supplying And Fixing Galvalium Sheet Roof Using Necessary Trusses, Purlins And U Or J Bolts, Nuts, Screws, Nails And Bitumen Washers Including Cost Of Labour And Materials Etc., Complete Complyingg With Standard Specification As Directed By The Departmental Officers. , Supplying And Fabrication And Fixing In Position Of Anodised Natural Colour Matt Finish Sliding Window In Three Track In All Floors With Following Sizes. All The Three Shutters With Slinding Arrangements, The Bottom Section Should Have Gutter Arrangements So As To Drain The Water Entering And Made With Extruded Aluminium Section For Outer Frames As Shown Below With Necessary Accessories Such Rubber Beading. Aluminium Clips, Rubber Beading,Handle And Fixing 4Mm Thick Clear Sheet Glass Including All Required For Fabrication Etc., Complete.Necessary Dismantling Making Holes In Rcc Columns, Beams, Masonry Wherever Necessary With Power Drill To The Extent Required And Made Good To The Original Conditions After Fixing As Directed By The Departmental Officers.The Al.Surfaces Is To Be Anodised With Matt Finish Under Electrically Condition In Accordance With Isi 1868/ 1962 Specification For An Average Anodic Film Thick Of Not Less Than 15 Microns. (All Materials Should Be Got Approved By The Executive Engineer Before Fixing In Position) , Painting Two Coats On New Iron Works With Best Synthetic Enamel Paint Of Approved Colour And Quality – 10M2. , -2146826265 , -2146826265

Refer document

INR 7800.0 /-

INR 7.80 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB