Supply Delivery Of Laeks Arresting Materials In Ae-5 Section, GUNTUR-Andhra Pradesh

Supply Delivery Of Laeks Arresting Materials In Ae-5 Section --0.00 Supply and delivery of the following CID joints class 15 with drill core holes and including cost of ISI marked rubber rings of ISI ID 292-1988 bolts and nuts to ISI 1363 Part 1 & Part III/1984 etc. 50.00 100mm Dia Class 15 CID Joints 15.00 150mm dia Class 15 CID Joints 15.00 200mm dia Class 15 CID Joints 15.00 250mm dia Class 15 CID Joints 15.00 300mm dia Class 15 CID Joints 15.00 350mm dia Class 15 CID Joints 30.00 Supply and Delivery of 6mm thick Rubber Packing Including Taxes and Conveyance etc Complete as Per SS 40.00 Supply and Delivery of Bolts and Nuts (1/2 to 1) including taxes and Conveyance etc., Complete 0.00 Manufacture, supply and delivery of the following HDPE Pipe and Spl of approved by the departmental authorities and including cost and conveyance of all materials and all type of labour charges for fabrication, painting etc., complete. 60.00 160 mm dia HDPE Pipe 60.00 110 mm dia HDPE Pipe 60.00 90 mm dia HDPE Pipe 0.00 Manufacture, Supply and delivery of HDPE Specials including tranportation to anywhere in AP excluding excise duty sales tax and specials etc. complete 5.00 A) 160mm dia HDPE Pipe end Long Necks 21.00 B) 160mm dia MS Flanges 5.00 C) 160mm dia HDPE Bends 5.00 D) 160mm dia HDPE Tee 20.00 E) 200mm dia MS Flanges 5.00 F) 160mm dia HDPE Dummy 0.00 Supply and delivery of Resilient Seated Soft Sealing Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding Taxes. (P.H Items, P.83) 3.00 150mm dia Sluice valve (PN-1.60) 3.00 100mm dia Sluice valve (PN-1.60) 3.00 200mm Dia Sluice valve (PN-1.60) 779.00 Manufacture, Supply and Delivery of Cast Iron Pipesand Fittings (spls.) Conforming to IS. No. 7181/1986, 5531/1988, 3950/1979 and C.I.D Joints confirming to is No.8794/1988 at site of work anywhere in A.P. Including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding taxes and duties.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	14-05-2025		Modification of Terms and Conditions , Tender Dates	19-05-2025
2	17-05-2025		Modification of Terms and Conditions , Tender Dates	19-05-2025
3	19-05-2025		Modification of Terms and Conditions	26-05-2025
4	23-05-2025		Cancel	26-05-2025

Refer document

INR 8378.0 /-

INR 8.37 Lakhs /-