|
| 1 | BUILDING STRUCTURE |
| 2 | ITEM NO. : 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means.... WAREHOUSE -745.848 cumPROCESSING UNIT - 186.450 cum |
| 3 | ITEM NO. : 2 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means.... WAREHOUSE -119.592 cumPROCESSING UNIT - 44.550 cum |
| 4 | ITEM NO. : 3 Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete..... WAREHOUSE - 203.256 cum PROCESSING UNIT - 43.635 cum |
| 5 | ITEM NO. : 4 Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete.....WAREHOUSE - 897.484 cumPROCESSING UNIT - 205.680 cum |
| 6 | ITEM NO. : 5 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete....WAREHOUSE -225 cum PROCESSING UNIT -51.735 cum |
| 7 | ITEM NO. : 6 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed etc).... WAREHOUSE -16.308 cum PROCESSING UNIT -4.860 cum |
| 8 | ITEM NO. : 7 Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumenetc. complete..... WAREHOUSE - 1080 sqmPROCESSING UNIT - 234.112 sqm |
| 9 | ITEM NO. : 8 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc)...WAREHOUSE - 37.328 cumPROCESSING UNIT - 15.633 cum |
| 10 | ITEM NO. : 9 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc)...WAREHOUSE - 14.159 cumPROCESSING UNIT - 8.688 cum |
| 11 | ITEM NO. : 10 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc)....WAREHOUSE - 28.566 cumPROCESSING UNIT - 10.868 cum |
| 12 | ITEM NO. : 11 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate( Crushed sand VSI Grade finely washed etc).... WAREHOUSE - 2.280 cumPROCESSING UNIT - 3.801 cum |
| 13 | ITEM NO. : 12 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc).. ..WAREHOUSE - 1.080 cumPROCESSING UNIT - 1.182 cum |
| 14 | ITEM NO. : 13 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.....WAREHOUSE - 9.809 mt PROCESSING UNIT - 5.025 mt |
| 15 | ITEM NO. : 14 Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete..... WAREHOUSE - 47.610 cum PROCESSING UNIT - 18.113 cum |
| 16 | ITEM NO. : 15 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete....WAREHOUSE - 129.485 cumPROCESSING UNIT - 45.136 cum |
| 17 | ITEM NO. : 16 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete....WAREHOUSE - 585.090 sqm PROCESSING UNIT - 203.123 sqm |
| 18 | ITEM NO. : 17 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete..... WAREHOUSE - 585.090 sqm PROCESSING UNIT - 203.123 sqm |
| 19 | ITEM NO. : 18 Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete.....WAREHOUSE - 585.100 sqm PROCESSING UNIT - 203.123 sqm |
| 20 | ITEM NO. : 19 Providing and applying plastic emulsion paint of approved quality, colour and shade tonew surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete..... WAREHOUSE - 585.100 sqm PROCESSING UNIT - 203.123 sqm |
| 21 | ITEM NO. : 20 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (With mechanical gear)....WAREHOUSE - 21.420 sqm PROCESSING UNIT - 5.355 sqm |
| 22 | ITEM NO. : 21 Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.).... WAREHOUSE - 22.800 sqmPROCESSING UNIT - 22.800 sqm |
| 23 | ITEM NO. : 22 Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc.as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. No. : As directed by Engineer-in-charge..... WAREHOUSE - 5.220 mtPROCESSING UNIT - 0.247 mt |
| 24 | ITEM NO. : 23 Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S. Angles (50 mm x 50 mm x 6mm) at 2.5 Metres, centre to centre including excavating pits for foundation, fixing post in cement concrete of size 45 x 45 x 45 cm., fastening the wire and painting the M.S. Angles with one coat of red lead primer and two coats of painting etc. complete .WAREHOUSE - 298 rmtPROCESSING UNIT - 0 |
| 25 | ITEM NO. : 24 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.....WAREHOUSE -0 PROCESSING UNIT - 1.415 mt |
| 26 | ITEM NO. : 25 Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.Spec. No. : As directed by Engineer-in-charge..... WAREHOUSE - 0PROCESSING UNIT - 1.859 mt |
| 27 | ITEM NO. : 26 Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc.as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. No. : As directed by Engineer-in-charge... ..WAREHOUSE - 0 PROCESSING UNIT - 1.007 mt |
| 28 | ITEM NO. : 26 Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc.as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete.WAREHOUSE - PROCESSING UNIT - 0.507 mt |
| 29 | ITEM NO. : 27 Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws & bolts, lead & bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.).... WAREHOUSE - 0 PROCESSING UNIT - 286 sqm |
| 30 | ITEM NO. : 28 Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 kg/sq.m.)....WAREHOUSE - 0 PROCESSING UNIT - 26 sqm |
| 31 | ITEM NO. : 29 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 32 | ITEM NO. : 30 Supplying hard murum/kankar at the road site,including conveying and stacking complete. |
| 33 | ITEM NO. : 31 Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 34 | ITEM NO. : 32 Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. |
| 35 | ITEM NO. : 33 Providing,laying,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness,handpacking to proper grade and camber, applyin gand brooming requisite type of screening /binding Materials to fill up the interstices of coarse aggregate,watering and compacting with vibratory roller to ther equired density.By Mechanical Means-GradingI 100 MM (UsingScreening Type B (11.2 mm) Aggregate) |
| 36 | ITEM NO. : 34 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II 75MM (Using Screening Type B (11.2 mm) Aggregate) |
| 37 | ITEM NO. : 35 Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 38 | ITEM NO. : 36 Provide 20 mm premix carpet as directed by Engineer In charge |
| 39 | ITEM NO. : 37 9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ 1.2kg/Sq.m, preparing existing road surface by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 40 | PEB StructureStructural Steel E-350 ( JSW make) |
| 41 | ITEM NO. : 1 Supplying, fabricating, erecting and fixing in position of steel structures at all elevations using fusion welding quality steel E-350 (Fe490)conformingtoIS:2062-2006.Rateshallincludecostof cutting,welding,spliceplatesandpackingplates,transporting, straightening,cleaning,fabricatinganderectinginposition welded/boltedStructuralsteelworkincolumns,beams,trusses, purlins, platforms, ladders, monorails, staircases,supports, strengthening of steel membersetc. at site to line and level, supply ofapprovedbolts/nuts/washersetc. - 35-50 micron etc., complete as shownindrawings,asperspecificationsandasdirectedbythe Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost of bolts,nuts, washers, welding and electrodesrequired for the complete work). |
| 42 | ITEM NO. : 2 Supplying,fabricatinganderectingofColdFormedLightGauge structuralsteelmembersconformingtoIS:801/IS:811hot-dip galvanisedtoIS:4759-96includingcutting,weldingorbolting, splice plates and packing plates, transporting,straightening,cleaning, fabricating and erecting in position.. |
| 43 | ITEM NO. : 3 Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer incharge with all necessary accessories..... |
| 44 | ITEM NO. : 4 Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge-CORNER FLASHING… |
| 45 | ITEM NO. : 5 Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge-Gable flashing |
| 46 | ITEM NO. : 6 Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge-Center Ridge |
| 47 | ITEM NO. : 7 \"\"\"\"\"\"\"\"Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends,all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing andfixingbolts,nuts,washersetc.,conformingtolatest specificationincludingstraightening,cutting,welding,bendingto shape, bolting etc., complete and as directed as per engineerincharge / Construction Manager.\"\"\" |
| 48 | ITEM NO. : 8 \"\"\"\"\"\"\"\"Providing and fixing of the rain water down take pipes of PPGI, the sectionalareaofrainwaterdowntakepipesprovidedshallbe generally at the rate of 1 square cm per 70 to 80 square decimetre of roof area drained. No spout shall be less than 80 mm in diameter. Thespacingofspoutsshallbearrangedtosuitthepositionof openings inthe wall including necessary accessories for fixing the pipe and including all materials and labour charges etc., complete as shownindrawings,asperspecificationsandasdirectedbytheEngineer-in-Charge / Construction Manager.\"\"\" |
| 49 | ITEM NO. : 9 Supply & Fixing of 2mm thkpolycarbonate sheets as per drawing & as directed by engineer in-charge..... |
| 50 | ITEM NO. : 10 Turbo Ventilator 24\"\"…WAREHOUSE -12 PROCESSING UNIT - 4 |
| 51 | ELECTRIFICATION |
| 52 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. WAREHOUSE -216 rmt PROCESSING UNIT - 97 rmt |
| 53 | Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete WAREHOUSE - 78 rmtPROCESSING UNIT -31 rmt |
| 54 | Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete WAREHOUSE - 36 rmtPROCESSING UNIT -12 rmt |
| 55 | Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories WAREHOUSE - 77 nosPROCESSING UNIT -14 nos |
| 56 | Supplying & erecting aviation obstruction light minimum up to 48 watt consisting of yellow painted die-cast aluminium alloy housing with integral LED aviation light comprising of aluminium housing with polycarbonate enclosureWAREHOUSE - 9 nosPROCESSING UNIT - 1 nos |
| 57 | Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the resultsWAREHOUSE - 7 nosPROCESSING UNIT - 1 nos |
| 58 | Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board WAREHOUSE - 23 nosPROCESSING UNIT - 12 nos |
| 59 | Supplying and erecting GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. 6-1-6WAREHOUSE -41 sqm PROCESSING UNIT - 18 sqm |
| 60 | Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole WAREHOUSE -49 rmt PROCESSING UNIT - 22 rmt |
| 61 | Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole WAREHOUSE - 53 rmtPROCESSING UNIT - 21 rmt |
| 62 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 7-6-10 WAREHOUSE - 71 rmtPROCESSING UNIT - 31 rmt |
| 63 | Supplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for XLPE armoured cableWAREHOUSE - 39 nosPROCESSING UNIT -23 nos |
| 64 | Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. 1-5-7WAREHOUSE - 37 nosPROCESSING UNIT - 24 nos |
| 65 | Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories WAREHOUSE - 49 nos PROCESSING UNIT - 11 nos |
| 66 | Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessoriesWAREHOUSE - 63 nosPROCESSING UNIT - 47 nos |
| 67 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. WAREHOUSE - 96 sqmPROCESSING UNIT - 50 sqm |
| 68 | Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. 1-6-8WAREHOUSE - 46 nos PROCESSING UNIT - 20 nos |
| 69 | Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC lock/wooden board with 3 years warranty. WAREHOUSE - 39 nosPROCESSING UNIT - 22 nos |
| 70 | Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.WAREHOUSE - 11 nos PROCESSING UNIT - 5 nos |
| 71 | Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board.WAREHOUSE - 13 nosPROCESSING UNIT - 1 nos |
| 72 | Supplying, erecting, testing and commissioning of 6mm (0.24in) dia PVC Installation Multi core Conference Cable (without connectors) completeWAREHOUSE - 43 rmtPROCESSING UNIT - 23 rmt |
| 73 | Supplying, erecting & terminating FR XLPE insulated unarmoured cable, 1100 V 1 core 120 sq. mm. aluminium conductor complete erected with lugs on wall/trusses/ pole or laid in provided trench / pipe WAREHOUSE - 79 rmt PROCESSING UNIT - 38 rmt |
| 74 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable, 1100 V 3 core 6 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe WAREHOUSE - 156 rmtPROCESSING UNIT - 80 rmt |
| 75 | Supplying & erecting mains with 4x16 sq.mm FRLSH copper PVC insulatedwire laid in provided conduit/trunking/inside pole/bus bars or any other placesWAREHOUSE - 35 rmtPROCESSING UNIT -27 rmt |
| 76 | Supplying and erecting modular type 32A, DP key tag switch with key tag onprovided plate and box with wiring connections complete. WAREHOUSE - 25 nosPROCESSING UNIT - 23 nos |
| 77 | Supplying and erecting LED square / circular Max. 7W down lighter / PanelLight having pressure die-cast aluminium housing, polystyrene diffuser havingsystem lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W,CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV,Life class of 50,000 Hrs at L70B50 including driver, having mountingarrangement with board for surface type or spring loaded mounting clipscomplete with minimum 2 years warranty WAREHOUSE - 31 nosPROCESSING UNIT -10 nos |
| 78 | ROYALTY CHARGES |
| 79 | Royalty for Sand |
| 80 | Royalty for murum and Other material |
| 81 | QUALITY CONTROL & LAB TESTING |
| 82 | M20 CONCRETE: Mix Design with all tests on basic materials |
| 83 | M20 CONCRETE: Concrete cube compressive strength |
| 84 | M10 CONCRETE: Concrete cube Test |
| 85 | BITUMEN Penetration, Softening Point, Flash & Fire Point, Specific Gravity |
| 86 | BITUMEN Viscosity. |
| 87 | BRICKS :Water Absorption (Set of 5 Bricks), Compressive strength (Set of 5 Bricks),Efflorescence (Set of 5 Bricks) |
| 88 | TMT STEEL :Yield Stress, Ultimate Tensile Stress, Elongation, Weight per running meter. |
| 89 | Sand :- i) Fineness Modulus, II) Silt content |
| 90 | Murum :- ii) Atterberg Limit |
| 91 | iii) Density of compacted layer |
| 92 | iv) Proctor Test |
| 93 | Cement Test i) Comprecive strengh ii) Intital and final setting time iii)Spcific Gravity iv) Spicific Gravity v) soundness vi) Finess vii) Mortar |
| 94 | Metal Test i) AIV ii) Gradintion iii) water Absorbation |
| 95 | Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct |
