|
| 1 | Provision-Estimate for 04 Km 11 KV Line Conductor Aug. At Barkheda to Onder |
| 2 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 3 | 140 kg. 8.0 mtr. Long PCC Pole erection-[Including Pit Digging- Base padding of pole by Stone Block/Pre cost Block, pole erection, back filling/boulder, earthing coil] |
| 4 | Transportation of 140 kg. 8.0 mtr. Long PCC Pole Including with Material Transportation from Area store Guna/Gwalior/Bhopal to working Site (51 to 100 KM.) (Per No. Per KM) as per RCA GUNA No.6981-82 Dt. 11.03.2024 (56 KM*Rs. 14.4/KM)=806.4/per Pole *20 No. 140 kg. 8.0 mtr. Long PCC Pole |
| 5 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 6 | Labour for 11 KV Pin Insulator Polymer Composit (5 KN) |
| 7 | 11 KV Strain hardware (T&C type) fittings |
| 8 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 9 | Labour for 11 KV(45KN) Composite Polymer Disc Insulators |
| 10 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 11 | Stringing of AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 12 | Aluminium Binding wire and tape |
| 13 | Aluminium paint |
| 14 | Labour for Aluminium paint |
| 15 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 16 | Labour for Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 17 | Back filling of poles with boulders. |
| 18 | Danger Boards Enamelled 11 KV |
| 19 | Labour for Danger Boards Enamelled 11 KV |
| 20 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 21 | G.I. WIRES 4.0 MM. (8 SWG) |
| 22 | Labour for G.I. WIRES 4.0 MM. (8 SWG) |
| 23 | Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor |
| 24 | M.S.Nuts with Bolts |
| 25 | Red oxide paint |
| 26 | Labour for Red oxide paint |
| 27 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 28 | 11 KV \"V\" cross-arms angle type (65x65x6 mm angle) |
| 29 | Labour for 11 KV \"V\" cross-arms angle type (65x65x6 mm angle) |
| 30 | 11 KV Top clamps angle type65x65x6 mm |
| 31 | Labour for 11 KV Top clamps angle type65x65x6 mm |
| 32 | D.C. Cross-arms 8 ft centre to center (100x50x6mm)Channel |
| 33 | Labour for D.C. Cross-arms 8 ft centre to center (100x50x6mm)Channel |
| 34 | Back clamps (50x6 mm flat) for 140 kg PCC Pole |
| 35 | Clamps for 140 kg PCC pole (50x6 mm Flat) |
| 36 | GST @ 18% |
