|
| 1 | PTMT Angle Stop cock with Flange 15 mm |
| 2 | Providing and fixing PTMT pillar cock of approved quality and colou .1 15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 3 | G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped urinal |
| 4 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 5 | White Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with all fittings |
| 6 | G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped urinal |
| 7 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 8 | Coupling/Socket fittings for 22.22 mm outer dia SS pipe |
| 9 | Coupling/Socket fittings for 28.58 mm outer dia SS pipe |
| 10 | Coupling/Socket fittings for 34.00 mm outer dia SS pipe |
| 11 | Coupling/Socket fittings for 42.70 mm outer dia SS pipe |
| 12 | Coupling/Socket fittings for 48.60 mm outer dia SS pipe |
| 13 | G.I. Union 32 mm nominal bore |
| 14 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 15 | H.P. or L.P. ball valve with polythene floats: 25 mm dia |
| 16 | Equal Tee for 54 mm outer dia SS pipe of grade 316L as per IS 6911:2017and conforming to EN-10312 standard |
| 17 | PTMT - Waste Coupling 38/40 mm |
| 18 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 19 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore |
| 20 | P.T.M.T. extension nipple 20 mm dia |
| 21 | P.T.M.T. extension nipple 25 mm dia |
| 22 | P.T.M.T. extension nipple 15 mm dia |
| 23 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore |
| 24 | Elbow 90° for 15 mm outer dia SS pipe of grade 316L as per IS 6911:2017and conforming to EN-10312 standard |
| 25 | Installation,Testing Commissioning of wall brackets/celing fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required |
| 26 | Insrtallation, testing , commissioning of celing fan, including wiring the down roads of standard length (upto 30 cm ) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 27 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular paltes etc. as required. 3 pin 5/6 A socket outlet |
| 28 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular paltes etc. as required. 6 Pin 15/16 A socket outlet. |
| 29 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular paltes etc. as required. 5/6 A Switch. |
| 30 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular paltes etc. as required. 15/16 A Switch. |
| 31 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required upto 450 mm sweep. |
| 32 | 3 Pin 5/6 amps socket outlet, piano type ISI marked. |
| 33 | Supplying and fixing two module stepped type elextronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc.as required. |
| 34 | Supplying andfixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connection, testing and commissioning etc as required. 40 A |
| 35 | Supplying and fixing followign rating, double pole, 240 V, isolator in the existing MCB DB complete with connection testing and commissioning etc. as required 63 A. |
| 36 | 25 Amp modular SPMCB, \"C\" Curve. |
| 37 | Eatrhing thimbles and solder |
| 38 | GI nipple 50 mm |
| 39 | M - seal |
