|
| 1 | Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and removal from site and making good the disturbed surfaces of (wall/floors/ceiling etc) complete all as specfied & directed. |
| 2 | M&L for point wiring with PVC FRLS insulated multistranded sheathed cable 1.5 Sqmm size with stranded copper conductor, 1100 volts grade conforming to IS:694 drawn in an existing conduit or as per site requirement making good the surfaces as per existing surfaces with concealed sunk in pressed steel/GI terminal boxes of 1.6 mm thick factory made fixed with brass screws and cup washers including single core stranded copper conductor 1.5 sqmm PVC insulated sheathed cable as earth wire to common earth and connected to earth dolly drawn in an existing conduit or as per site requirement completed all as specified for the following:- |
| 3 | (a) One light/fan/bell/Exhaust fan/Fresh Air Fan point controlled by one way switch 5 amps. |
| 4 | (b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. |
| 5 | (c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board along with other switches. |
| 6 | (d)One light point controlled by two, two way switch. |
| 7 | M&L one power point with insulated stranded copper conductor cable 2.5 Sqmm single core and PVC insulated FRLS 1100 Volts sheathed copper conductor 2.5 Sqmm stranded conductor as earth wire connected to dolly complete. Note :- Point wiring drawn in existing conduit or as per site requirement all as specified and directed. |
| 8 | M&L of switch piano type 6 Amp single pole one way complete all as specified and directed. |
| 9 | M&L of 2 way switch piano flush type SP two way 6 Amp complete all as specified and directed . |
| 10 | M&L of switch pianotype 16 amp single pole one way complete all as specified and directed. |
| 11 | S&F of socket outlet multipurpose 2/3 pin 6 amps flush button type complete all as specified and directed. |
| 12 | S&F of socket outlet multipurpose 2 in 1,3 pin,6 and 16 Amps complete all as specified and directed. |
| 13 | M&L of ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed. |
| 14 | S&F of ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections complete all as specified and directed. |
| 15 | M&L Bell push switch flush type, 6 Amp complete all as specified and directed. |
| 16 | M&L of electric Bell ding dong AC 230 volts SP with brass screws and cup washers all as specified and directed. |
| 17 | M&L of Lamp holder,PVC/Polycarbonte type with back plate suitable for batten fitting with connections complete all as specified and directed. |
| 18 | M&L for point wiring complete with PVC 1.5 sqmm single core PVC insulated sheathed FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including PVC conduit and all conduit accessories surface/concealed in wall/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing modular switches, socket outlet and fan regulators etc. all as specified and directed.Note :- Point wiring drawn in existing conduit or as per site requirement. |
| 19 | (a) One light/fan/bell/Exhaust fan/Fresh Air Fan point controlled by one way switch 5 amps. |
| 20 | (b) One 3 pin 6 Amps socket outlet point controlled by one way switch on independent board. |
| 21 | (c) One 3 pin 6 Amps socket outlet point controlled by one way switch on same board along with other switches. |
| 22 | Ditto- all as per item no. 14 one power point with insulated stranded copper conductor cable 2.5 Sqmm single core and PVC insulated FRLS 1100 Volts sheathed copper conductor 2.5 Sqmm stranded conductor as earth wire connected to dolly complete. Note :- Point wiring drawn in existing conduit or as per site requirement all as specified and directed. |
| 23 | M&L for one power point with PVC insulated stranded copper conductor cable 4.00 Sqmm single core 1100 Volts for one 3 pinAC Box outlet, 20 Amps concealedand including provision of 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. |
| 24 | M&L of Modular switch 1 way 6A,1 module, 230V, 50 Hz complete all asspecified and directed. |
| 25 | M&L of Modular switch 1 way 16A,1 module, 230V, 50 Hz complete all asspecified and directed. |
| 26 | S&F of Modular socket 6A- 5 pin combined 2 module,230V, 50 Hz complete all as specified and directed. |
| 27 | S&F of Modular socket 6A/16A - 2/3 pin combined 2 module, 230V, 50 Hz complete all asspecified and directed. |
| 28 | M&L of switch modular type single pole Bell push 6 Amp 1 module complete all as specified and directed. |
| 29 | M&L of electric Bell ding dong AC 230 volts single pole all as specified and directed. |
| 30 | S&F of Modular ceiling fan regulator, step typefor BLDC ceiling fan 1 or 2 module . |
| 31 | M&L of Lamp holder,PVC/Polycarbonte type with back plate suitable for batten fitting with connections complete all as specified and directed. |
| 32 | M&L of ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed. |
| 33 | Identifying and rectifying the defects pertains to ceiling fans/exhaust fans/fresh air fans and connects electric circuit, tightening of loose wiring/conduits/ fan capacitors and connection carrying out minor repairs incl blade alignments,screwing/tightening the nuts/bolts/washers etc incl taking down & refixing properly in the same position after repairs, complete all as specified and directed. |
| 34 | M&L for rewinding of ceiling fans of any type and make with super enamelled copper wire of appropriate gauge suiatble for existing makein the workshop including necessary lathe work on shaft, both sides of rewinding covered with high quality varnish and provisions of new nuts/pins including taking out old burnt wind of copper/aluminium complete all as specified and directed. |
| 35 | Ditto- all as per Item No. 27 here-in-before but Air ventilation PVC body/ metal body exhaust fan of size 200/230/300 mm sweep. |
| 36 | M&L for overhauling of celing fan 1200mm/1400mm by greasing and oiling,replacement of unserviceable/defective components, except rewinding of starter winding complete all as directed. |
| 37 | Note Sl.No. 27 : (a) Spare parts found unserviceable/defective will be measured and paid separately under relevant item as Supply and fix in repair . |
| 38 | Supply in Repairs/Replacements of following spare of Ceiling fan 1200mm /1400mm sweep of different make:- |
| 39 | (a) Fan Condenser of capacity 2.5/3.5 mfd, 220 Volts, AC 50 Hz, plastic-casing, two terminal-copper wire, complete all as specified and directed. |
| 40 | (b) S&F in repair MS clamp with rubber reel, nuts, bolts, split pin etc suitable for 1200/1400 mm sweep ceiling fan complete all as specified and as directed. |
| 41 | (c) Ball bearing of size 6201/6202 as per sample complete all as specified and directed. |
| 42 | (d) Gun metal bush as per sample. |
| 43 | (e) Fan canopy pvc body, white in colour, suitable for existing fan, as per sample and directed. |
| 44 | (f) Ceiling fan blade 1200 mm sweep made up of aluminium body having provision of free size monting nuts/screw all as per requirement at site complete all as specified and directed. |
| 45 | (g) S&F in repair of MS down rod 300/450 mm for fixing of ceiling fan complete all as specified and as directed. |
| 46 | M&L for preparation of old painted/rusted surfaces of 1200/1400 mm sweep ceiling fan and re-fixing the same after painting of the same with white colour synthetic enamel paint including filling cavities with filler & one coat after cleaning all dust etc.complete all as specified and directed. NOTE:-All T&P and labour team as required will be provided by the contractor and cost deemed to be included in the quoted rate. |
| 47 | M&L in repair louver shutter of exhaust fan suitable for 300 mm size at the height from 3 mtr to 14 mtr height making good surface of disturbed area complete all as specified & directed.Note: Contractor shall arrange suitable T&P including necessary form work, scaffolding and safety measures to fix properly the exhaust fan shutter complete all as specified and directed. |
| 48 | M&L for Overhauling/Dismantling of defective/rusted Geyser of 25 Ltr capacity, removing inlet/outlet connections, taking out U/S parts by unscrewing bolts and nuts etc. Checking defects and re-assembling the Geyser after refixing serviceable/new parts & cleaning, dicling and refixing only serviceable items and re-installing the Geyser in suitable place/position and connecting inlet-outlet connections & testing complete, all as specified and directed by Engr-in-charge.Note:(a) Items required for replacement of U/S parts will be measured and paid separately under relevant item of sch \"A\" ). |
| 49 | Supply in repairs/replacements of following spare parts of geyser storage type of different make for capacity 25 ltrs all as samples as required. |
| 50 | (a)Apparatus assembly duly prewired without heating element and thermostat/thermal cutout. |
| 51 | (b)Indication lamp (Green/Red) as per sample. |
| 52 | (c)Thermostatas per sample. |
| 53 | (d)Heating element 2.0 KW,round bottom suitable for 25 Ltrs or as per sample complete all as specified and directed. |
| 54 | (e)Heating element 2.0 KW,square bottom suitable for 25 Ltrs or as per sample complete all as specified and directed. |
| 55 | (f)Heating element 2.0 KW,triangular bottom suitable for 25 Ltrs or as per sample complete all as specified and directed. |
| 56 | (g ) Cover outer for geysers suitable for any make/capacity/type of Geysers installed at site duly painted with two quotes with enamel (Deco) paint of colour & shade complete all as specified and directed |
| 57 | (h)Stainless Steel inner tank of 25 Ltrs capacity complete all as specified and directed as . |
| 58 | (j) Bottom and top cover for Geysers suitable for any make/capacity/type of Geysers installed at site duly painted with two quotes with enamel (Deco) paint of colour & shade complete all as specified and directed. |
| 59 | (k) Geyser SS braided pipe of 12 mm (internal dia) suitable for hot/cold water, 600 mm long with nuts and rubber washers complete all as specified and directed. |
| 60 | (l) S&F in repair Nut and Bolt full thread hexagon bolt mild steel of size (1/2x6) inch alongwith washer suitable for fixing of Geyser 25 ltrs. complete all as per site requirement all asspecified and directed. |
| 61 | Taking down DBs,VTPN DBs of any make and type from the site and making good to the disturbed surfaces complete all as specified and directed. |
| 62 | M&L in repair MCB distribution board SPN 8 way with 200 Amps rated bus bar metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet complete all as specified and as directed. |
| 63 | S&F of factory made epoxy polyester powder coated VTPN MCCB distribution board 4 way with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet andfixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates, 4 pole MCCB and ELM as incommer and SP MCBs as outgoings complete all as specified and conforming to IS: 8623 all as specified and directed.NOTE :-(a) MCBs/MCCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 64 | S&F in repair MCCB 100 Amps, 4 Pole 415 volts 16 KA 50 HZ complete all as specified and directed. |
| 65 | S&F in repair MCCB 125 Amps, 4 Pole 415 volts 16 KA 50 HZ complete all as specified and directed. |
| 66 | S&F in repair metal plug top 20 Amps 3 pin 230-volts complete all as specified and directed. |
| 67 | S&F in repair PVC plug socket 20 Amps 3 pin 230-volts complete all as specified and directed. |
| 68 | S&F in repair SP MCB 6 to 32 Amps, 240 v,50 Hz AC ‘B’ curve, 10 KA breaking capacity, in the MCB DB complete all as specified and directed. |
| 69 | S&F in repair SP MCB 40 Amps, 240 v,50 Hz ‘B’ curve, 10 KA breaking capacity, in the MCB DB complete all as specified and directed. |
| 70 | S&F in repair MCB SPN 32 Amps, 240V,50 Hz \"C\" curve 10KA current carrying capacity in the MCB DBcompleteall as specified and directed. |
| 71 | S&F in repair sheet metal enclosure SP and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10 KA breaking capacity complete all as specified and directed. |
| 72 | S&F in repair modular AC Box with 20A SP mini MCB, Plastic enclosure & unbreakable Heavy DutyISI mark Plug Top complete set duly concealed in wall complete all as specified and as directed. |
| 73 | S&F in repair RCBO, 230 Volt, 40 Amp, 30mA, 50 Hz, with 10 kA short circuit capacity of double pole for ensuring protection from leakage current, short circuit & over load, complete all as specified and as directed. |
| 74 | Taking down carefully sub main wiringthree single run 6/10 Sqmm of any make and type complete all as directed. |
| 75 | Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits/existing conduits including cutting of chases for laying conduit (if required) making good the disturbed surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated sheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete all as specified and directed. Note :- Two runs of IC x 6.00 sqmm (Phase wire and neutral ) and one run of IC x 6.00 sqmm (as earth wire) will be measured as one unit length. |
| 76 | S&F electronic meters temper proof LCD display with polycarbonate cover single phase 230 V, 10- 60 Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed. |
| 77 | M & L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-1 2009, connected to earthing test point, earth lead protected by medium grade 15 mm dia GI pipe connected to main control board and GI pipe medium grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1:2:4 B-1 ( including excavation and earth work, disposal of surplus soil to a distance not exc. 50 Mtrs) all as specified anddirected.Note:-(a). PCC pit shall be provided at list 500 mm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipe and fittings, junction, elbow etc shall be deemed to be included in the unit rate.(b). RCC pit cover shall be of pre-castRCC 1:2:4, type B-1, 80 mm thick reinforced with XPM weighing not less than 4 Kg/ Sq m in lieu of cast iron cover all as specified or indicated including testing on completion all as specified and directed. |
| 78 | Identifying and rectifyingthe minor defects pertaining to internal electrification of any type and nature such as taking down defective switch/socket/ceiling rose/holders/fittings / fixtures any type, rectification of faulty electric circuits,tightening of loose connections, replacement of old u/s wiring/conduits/casing capping,connections etc. including consumable items i.e. Screw, wall plug,PVC electrical insulation tape as required on sites complete all as specified and directed. |
| 79 | Identifying and rectifyingthe minor defects pertaining to internal electrification of any type and nature such as repair in Bldg LT panels ,taking down defective MCBs / MCB DBs/SPN DBs / TPN DBsany type and repairing/replacements, rectification of all type of electrical faults, tightening of loosePanels electric cablels connections, replacement of old U/S MCBs/DBs including consumable items i.e. Screw, wall plug, PVC electrical insulation tape as required on sites complete all as specified and directed. |
| 80 | S&F in repair copper wind motor, single phase, 240V suitable for PVC fresh air fan of sweep size 225/ 250/300 mm as per sample given at site complete all as specified and directed. |
| 81 | S&F in repair copper wind motor, single phase, 240V suitable for metallic heavy duty exhaust fan of sweep size 250/300 mmas per sample given at site complete all as specified and directed. |
| 82 | S&F in repairsingle core PVC insulated cable 1.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits complete all as specified and directed. |
| 83 | S&F in repairsingle core PVC insulated cable2.5Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits complete all as specified and directed. |
| 84 | S&F in repairsingle core PVC insulated cable4.0Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits complete all as specified and directed. |
| 85 | S&F in repairsingle core PVC insulated cable6Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits complete all as specified and directed. |
| 86 | S&F in repaircopper cable flexible 3 corePVC insulated of size 40/.0076 ll complete all as specified and directed. |
| 87 | S&F in repair PVC insulated flexible cable three core copper conductor of size 1.00 Sqmm ISI marked covered with white colour round insulation complete all as specified & directed. |
| 88 | S&F in repair , 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC armoured,PVC sheathed 6 sq. mm nominal cross section, 2 core. |
| 89 | S&F in repairhylum sheets 3 mm thick of the following sizes :- |
| 90 | (a) Sheet as per sample suitable for mounting one piano switch 5 Amp and one 5 Amp socket duly cut for mounting as above complete all as specified and directed. |
| 91 | (b) Sheet as per sample suitable for mounting one piano switch 15 Amp and one 15 Amp socket duly cut for mounting as above complete all as specified and directed. |
| 92 | (c) Sheet as per sample suitable for mounting three piano switch 5 Amp duly cut for mounting as above complete all as specified and directed. |
| 93 | (d) Sheet as per sample suitable for mounting four piano switch 5 Amp and one 5 Amp socket duly cut for mounting as above complete all as specified and directed. |
| 94 | (e) Sheet as per sample suitable for mounting five piano switch 5 Amp and one 5 Amp socket duly cut for mounting as above complete all as specified and directed. |
| 95 | S&F in repair LED lights fitting (3.5 to 4 feet) 1x20Watt ,220V,AC decorative box type with driver,holder incl. LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 96 | S&F in repair LED lights fitting mirror type with high out put diffuser 2 feet, 10 Watt ,220V,AC decorative box type with driver,holder and LED lamp incl. connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 97 | S&F in repair LED lights fitting 1x9W/1x10W bulkhead luminaries incl. LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 98 | S&F of 35 watts 230 V AC outdoor type with High efficient LED Building security light fitting with high pressure die cast Aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP: 65/66 protected complete with bracket made out of 32 mm GI pipe light grade 1.2 mtr long bend to shape with clamps and fixing bolts all as specified and directed. |
| 99 | S&F LED Lamp of wattage 10 Watt, 95 lm/W, with PF >0.9 & CRI:80,protection againt high voltage upto 360V, B22 ,230 Volts,50 Hz,6500K complete all as specified and directed. Similar to Philips/Regent/Havells/Osram |
| 100 | S&F in replacement of chargeable Inverter type minimum 04 hrs battery backup 9 watt bulb as per site requirement complete all as specified and as directed. |
| 101 | M&L in repair switch piano flush type 6 Amp SP one way complete all as specified and directed. |
| 102 | M&L in repair switch piano flush type 6 Amp SP two way complete all as specified and directed. |
| 103 | M&L in repair switch piano flush type 16 Amp SP one way complete all as specified and directed. |
| 104 | S&F in repair socket outlet 3 pin 6 Amp flush type complete all as specified and directed. |
| 105 | S&F in repair socket outlet 2 in 1,3 pin 6/16 Amps complete all as specified and directed. |
| 106 | M&L in repair ceiling rose 3 phase PVC polycorbonate,insulated body complete all as specified and directed. |
| 107 | S&F in repairswitch type normal electronic fan regulator 5 stepcomplete all as specified and directed. |
| 108 | M&L in repairbell push,flush type,5 amp complete all as specified and directed. |
| 109 | M&L in repairbell ding dong AC,230 volts,single pole complete all as specified and directed. |
| 110 | M&L in repairinsulated body pvc , angle holder (metal ring) B22 type ISI marked complete all as directed. |
| 111 | S&F in repair 15A plug top 240 Volt AC and connection complete all as specified and as directed |
| 112 | S&F in repair of SS combined 15 ampwithout Box complete all as specified and directed. |
| 113 | S&F in repair of SS combined 15 ampwith Box complete all as specified and directed. |
| 114 | S&F in repair of SS combined 5 ampwithout Box complete all as specified and directed. |
| 115 | S&F in repair of SS combined 5 ampwith Box complete all as specified and directed. |
| 116 | S&F in repair ceiling fan capacitor for 1200/1400 mm sweep 2.5 mfdall specfied and directed |
| 117 | M&L of Modular switch 1 way 6A,1 module, 230V, 50 Hz complete all asspecified and directed. |
| 118 | M&L of Modular switch 1 way 16A,1 module, 230V, 50 Hz complete all asspecified and directed. |
| 119 | S&F of Modular socket 6A- 5 pin combined 2 module,230V, 50 Hz complete all as specified and directed. |
| 120 | S&F of Modular socket 6A/16A - 2/3 pin combined 2 module, 230V, 50 Hz complete all asspecified and directed. |
| 121 | M&L for taking down & refixing and repair of BLDC ceiling fans of any type and make complete including repair/replacement of PCB & ball bearing as requirment and provisions of new nuts and pins for 1200 sweep as per site reqiurement complete all as specified and as directed. |
| 122 | S&F of ceiling fans complete with blades, down rods, electronic regulators and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 123 | S&F in repair exhaust fan body/frame metallic type of any make for size 250/300 mm sweep with mounting legs, nut,bolts, fastners complete for mounting as per requirement at site complete all as specified and directed. |
| 124 | S&F in repair exhaust fan blade metallic type of any make for size 250/300 mm sweep as per requirement at site complete all as specified and directed. |
| 125 | S&F in repair PVC fresh air fan 225/250 mm blade as per sample, complete all as specified and directed. |
| 126 | S&F of Fresh Air Fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep, single phase,including cutting of holes in wall/windows for fixing the fresh air fan complete all as specified and directed. |
| 127 | S&F in repair flat panel light aesthetically designed (2ft x2ft) LED flat panel for surface/recessed mounting type which provides soft-light and glare free symmetrical illumination 35/36 Watt fixture should have minimum efficacy at system level 100 lm/watt output, Colour temperature4000-6500K, an operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed. |
| 128 | S&F in repair flat panel light aesthetically designed (2ft x2ft) LED flat panel for surface/recessed mounting type which provides soft-light and glare free symmetrical illumination 35/36 Watt fixture should have minimum efficacy at system level 100 lm/watt output, Colour temperature4000-6500K, an operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed. |
