Tender For Special Repair To Bldg No T-17 Stable At Ota Gaya; 1 Demolition of brickwork masonry built in lime or cement mortar including all quiens arches pillars etc but including concrete articles. 2 M&L Brick work using sub class old size bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. 3 M & L brickwork with subclass B bricks, straight or curved on plan to any radius inhalf brick thick walls built in CM 1:4 complete all as specified and directed. 4 Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. 5 M & L for rendering 10mm thick internal surfaces on brick work in cm 1:6 in and finishing surfaces even and fair without using extra cement complete. 6 M & L for rendering 15mm thick in two layerson external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC. Note :- WPC measured and paid separatly 7 Supply only liquid water proofing compound (Make : Sika Latex Power) 8 M & L for preparation of old plasteredsurfaces and applying two coat of acrylic distemper on walls complete all as specified and as directed. 9 M & L for preparation of new plasteredsurfaces and applying two coat of acrylic distemper on walls complete all as specified and as directed. 10 M/L for 1 mmthick Birlawhite putty/JK white wall care putty on new/ old plastered surfaces and making the surface uniform & smooth. 11 M & Ltwo coat of cement base paint white or tinted on walls or fascia of roof or chajjas on new plastered surfaces of bldg complete all specified & directed. 12 M & Ltwo coat of cement base paint white or tinted on walls or fascia of roof or chajjas on old decorated prepared plastered/painted surfaces of bldg complete all specified & directed. 13 S & F in repairs CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete. 14 S & F in repairs CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete. 15 S & F of Male Brass Threaded Adaptor (MTA/ MBTA)or Female Brass Threaded Adaptor (FTA/ FBTA) complete. 16 S & F of tank adaptor complete all as specified. 17 S & F of Stop valve of PTMT 20 mm bore with handle any colour high pressure screwed for iron pipe/CPVC pipes and fixed.(Minimum weight 15mm-90gms/ 20mm92gms) complete 18 S&F of 1000 Lrts capacity white rotational moulded ploythene water storage tank (cylinderical vertical with closed top) multilayered hoisted and fixed in position. (Make : Syntex Titus or equivalent) 19 M & L Ball brass valves 25 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 20 S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified. 21 M & L for anodised aluminium snap grid frame work for false ceiling all as specified and as directed. 22 S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed by Engr- in- charge. 23 M&L for Second classclean sawn hard-wood in scantlings complete all as specified and directed by Engr-in-Charge 24 M & L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings and similar work. conforming to Fe-290 (gde E-165) 25 M&L for Mild steel work conforming to Fe-290 Gde E-165 in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete. 26 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rail, straining bolts, etc including provision of binding wire complete. 27 Supply only chain link mild steel galvanized fencing, any type or size complete. 28 M & L for preparation of new/old steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 29 M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick screed in CM 1:4 complete. 30 M & L for Machine cut Kota stone slab 18-20mm thick in riser of steps, skirting, vertical sufaces, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick screed in CM 1:4 complete. 31 Demolition of cement concrete not exc. 15 cm thicknes above or below ground level. 32 Excavating in trenches not exc 1.5m wide and not exceeding 1.5m deep as in soft/loose soil. 33 M & Lfor PCC type C2 1:3:6 using 40mm graded aggregate stone agg as in drain in foundation filling and mass concrete. 34 M & L for extra for forming fair finished drain or channel 30cm inner girth using extra cement incl forms moulds mitered /stopped ends etc. 35 M & L for PCC type B-0, 1:2:4 (12 .5mm graded aggregate)as in coping,benching and the like all as specified. 36 M & L for Precast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes , drain cover etc) and similar work including necessary form work and set in CM (1:6) complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately. 37 M&L for mild steel TMT bars 8mm dia and over cut to lengh bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and incl ms wire not less than 0.9mm dia. 38 M & L PCC type C-1 (1:3:6)using 20mm graded stone aggregate including necessary form work complete all as specified and directed by Engr-in-Charge. 39 Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed at site. 40 Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. 41 Taking down carefully copper/aluminium sub main wiring of any size fromsurface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. 42 M & L for point wiring using approved colour coding as per IS with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- 43 (a) One light point controlled by one way switch 5 Amps 44 (b) One ceiling fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator 45 (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. 46 (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. 47 Description all as per item No 4 here-in-before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. 48 S & F switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed. 49 S & F switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed. 50 S & F socket outlet 2-in-1, 5 pin, 5 amp, 230 Volts complete all as specified and directed. 51 S & F socket outlet 2-in-1, 5 pin, 5/15 amp, 230 Volts complete all as specified and directed. 52 S & F ceiling rose, surface bakelite with 3 terminals, ISImarked for batten fitting complete. 53 S & F stepped type electronic fan regulator flush type complete all as specified and directed. 54 S & F lamp holder, PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed. 55 M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit 56 S & F for sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 57 S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 58 Supply and fix MCCB 100 to 125 Amp, 50 Hz, 415 V with rupturing capacity 35 KA complete all as specified and as directed. 59 S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, C curve complete all as specified and as directed. 60 S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, C curve complete all as specified and as directed. 61 S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, C curve complete all as specified and as directed. 62 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. 63 Re-fixing of ceiling fans complete with blades, down rods, electronic regulator and accessories complete all as specified and as directed. 64 S & F for energy efficient exhaust fan of 250 mm sweep made of plastic body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all as specifiedand directed.(Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be includedin overall rate quoted). 65 S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed. 66 S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp, in B-22 cap complete all as specified and directed 67 S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. 68 M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note: GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. 69 Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm x 3.5 Core passing through DWC HDPE / in trench including necessary connection with lugs and cable gland etc complete all as specified and directed. 70 Galvanised iron steel tubes, ISI marked light grade of size 40mm bore for cable protection along the poles under road under drains complete all as specified. 71 Excavation in trenches n.exc 1.5 mtr wide and 1.5 mtr in depth in hard/dense soil for taking up/ laying of cable and getting out complete all as specified and directed. 72 Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed. 73 Removing surplus soil to a distance n.exc 50 mtr and making good the disturbed surfaces complete all as specified and directed. 74 Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. 75 Supply and laying for brick of common burnt clay, sub class B old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cables abutting each other complete all as specified and directed. 76 Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site.
