|
| 1 | Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed.Ref. Page- 11, Item -8,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 2 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as irected within a lead of 75 m.a) In ground floor including roof.Ref. Page- 10, Item -1.a,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 3 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof.Ref. Page- 11 Item -6.a,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 4 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing ubbish as directed within a lead of 75 m. In ground floor including roof.(a) upto 150 mm. thickRef. Page- 10 Item -2.a,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 5 | Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necessary trimming thesides of trenches, levelling, dressing and ramming thebottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm.Ref. Page- 1, Item -2,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 6 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.Ref. Page- 1, Item -3,a,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 7 | A) Earth work in Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)Ref. Page- 2, Item -4, A) PWD SOR Vol-I w. e. f. 1.11.2017 |
| 8 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant IS codes. a) Pakur VarietyRef. Page- 24, Item -4, a) PWD SOR Vol-I w. e. f. 1.11.2017 |
| 9 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinthRef. Page- 15, Item -8,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 10 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer\"s specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concretelaying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).Ref. Page- 47, Item -1,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 11 | Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure, ground floorRef. Page- 15, Item -8,b)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 12 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, pla -cing in proper position and binding with 16 gauge black anne -aled wire at every intersect- ion, complete as per drawing and direction.(JSW/JSPL/SHYAM/SRMB/BMASL/ELETORSTEEL/SSL)Ref. Page-43, Item -40,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 13 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant IS codes.a) Pakur VarietyRef. Page- 16, Item -16,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 14 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) inground floor.Ref. Page- 16, Item -16, PWD SOR Vol-I w. e. f. 1.11.2017 |
| 15 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or strai -ght including fitting, fixing and striking out after comp -letion of works (upto roof of ground floor)Ref. Page-42, Item -36,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 16 | a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.Ref. Page-104, Item -13,i)PWD SOR Vol-I w. e. f. 1.11.2017 (at the rate of 16 kg/sq.mtr) |
| 17 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.Ref. Page-106, Item -18,i)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 18 | Wood work in door and window framefitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).Ref. Page-114, Item -1,e)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 19 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. (a) 35 mm thick shutters (single leaf)Ref. Page-124, Item -11,a)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 20 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)b) 40mm X 6mm, 200mm LengthRef. Page-140, Item -4,b)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 21 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(viii) 100mm. X 75mm. X 3.50mm.Ref. Page-140, Item -5,viii)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 22 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with16mm dia rod with centre bolt and round fitting.(c) 300mm long.Ref. Page-141, Item -10,c)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 23 | Iron pad bolt (lock) of approved quality rod and handle single cast:(ii) 200mm x 16mm dia rod 105mm x 3mm plate.Ref. Page-142, Item -11,ii,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 24 | (ii) Door stopper (Anodised aluminium)Ref. Page-143, Item -19,iv)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 25 | Iron socket bolt of approved quality fitted and fixed complete.(150mm longx10mm dia)Ref. Page-141, Item -8,c)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 26 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge.Ref. Page- 116, Item -5,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 27 | Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mmwide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor.Ref. Page- 125, Item -15,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 28 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or hamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excludingcost of chipping over concretesurface](i) With 1:6 cement mortar(c) 15 mm thick plasterRef. Page- 16, Item -16,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 29 | Neat cement punning about 1.5mm thick in wall, dado,window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.Ref. Page- 192, Item -15,PWD SOR Vol-I w. e. f. 1.11.2017 Out side dado (Existing+ Proposed) |
| 30 | Applying Exterior grade Acrylic primer of approved quality and brandon plastered or cencrete surface old or new surface to receivedecorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. In Ground Floor:(a) One CoatPage- 196, Item -8 (a), PWD SOR Vol-1 w. e. f. 1.11.2017 |
| 31 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic EmulsionPage- 197, Item -17,(a), PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 32 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or infoundation or in foundation trenches.Ref. Page- 47, Item -3,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 33 | Supplying and laying chequered tiles of any shade & of pproved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling] Red Variety Ref. Page- 74, Item -46,ii) PWD SOR Vol-I w. e. f. 1.11.2017 |
| 34 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base /cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) Ref. Page- 109, Item -22, PWD SOR Vol-I w. e. f. 1.11.2017 |
| 35 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with aradite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorativeRef. Page- 64, Item -35,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 36 | (A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cementlurry @ 0.20kg/Sq.m. (i) Coloured decorative |
| 37 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfacessandpapering etcRef. Page- 200,Item -1(a)i, c, PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 38 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand paperingingusing of approved putty etc. on the surface, if necessary :b) On steel or other metal surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) Page- 200, Item -2(A)b,( iv), PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 39 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer\"s specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I (A) Deep Colour & WhitePage- 66, Item -36(A),PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 40 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6m eight for external wall) (ii) 4 mm thickPage- 205 , item- 1(ii)PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 41 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] Page- 107 , item- 20(b)PWD SOR Vol-1 w. e. f. 1.11.2017 |
| 42 | Supplying and laying true to line and level 20 mm / 25 mm. thick precast roof tiles made of cement conc. with stone chips as per approved strength and density set in 25mm avg. thick cement morter(1:3) and filling up joint (3 mm wide) with cement sand mortar (1:1) applying cement slurry @ 1.75 kg per Sq.m back of tiles and then settting close the precast tiles, finishing up the joints with slurry already laid and finally finishing the top surface including providing 150 mm.high skirting with the same tiles flushed with the inside surface of parapet wall,finishing the mouth of rain water pipes, curving etc. as necessary complete as per direction ofthe Engineer-in-charge. (Levelling if necessary may be paid separately)b) For 25 mm. thick precast tiles (cement 14.6 kg/ Sq.m forunderlayer)Page- 79 , item- 2PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 43 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete (i) 75 mm. Dia.Ref. Page-212, Item -21,i)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 44 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats ofapproved paint.(i) 580 mm X 440 mmPage- 41 , item- 2,iii)PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 45 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing).Page- 79 , item- 4,i)PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 46 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(i) 635 mm X 395 mm X 420 mmPage- 80 , item- 6,i)PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 47 | Supplying, fitting and fixing Squating plate with integral flushing in white us chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).(i) 450 mm X 350 mmPage- 80 , item- 7,i)PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 48 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mmPage- 82 , item- 19,i)PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 49 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo,nipple,longscrew, reducing socket, reducing tee, short piece etc.fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work(i) CPVC Pipes Class-1.Page- 29 , item- 1(a) PWD SOR Vol-2 w. e. f. 1.11.2017(i) 15 mm dia. medium quality |
| 50 | (ii) 20 mm dia. medium quality |
| 51 | (iii) 25 mm dia. medium quality |
| 52 | Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).Page- 6, item- 7(a),i)PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 53 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similarPage- 6, item- 7(b),i)PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 54 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).Page- 5, item- 6,i)PWD SOR Vol-2 w. e. f. 1.11.2017 (iv) 50 mm dia |
| 55 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer(b) 1000 litre capacityPage- 37, item- 6(b),PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 56 | Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.(a) Upto 1st story from G.L.Page- 37, item- 10(I),PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 57 | Labour for lowering plastic water storage tank and stacking in places as directed.(i) Upto 1500 litre capacity(a) From 1st floor to G.L.Page- 37, item- 12(I),PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 58 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(iii) 600 mm long Page- 43, item- 9,PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 59 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (i) 600 mm longPage- 43, item- 10,PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 60 | Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides).(i) Single Socketed 3 Meter Length (b) 110 mm Ref. Page- 68, Item -23(A), PWD SOR Vol-II w. e. f. 1.11.2017 |
| 61 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 900mm ,1200,1500(depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chipsand necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. Nadia excluding area of Kalyani Sub Div REMARKS Rate (in Rs.) Malda Darjeeling except plains of Siliguri Sub Divn. Jalpaiguri , Alipurduar, plains of Siliguri Sub Divn. & Area of Haldibari PS Coochbehar excluding the area of Haldibari PS Uttar/ Dakshin Dinajpur Dist. Item No. Description of Item Unit Kolkata / 24 Pgs (N & S) /Area of Kalyani Sub Div Purba Bardhaman Paschim Bardhaman Purulia Birbhum Howrah/ Hoogly Purba Medinipur/ Jhargram Bankura Paschim Medinipur/ Jhargram Murshidabad SECTION (B) - SANITARY AND DRAINAGE WORKS (B)-(IV) INSPECTION PIT, SEPTIC TANK, SOAK PIT ETC. i) With Pakur variety. (JSW/JSPL/...)Ref. Page- 87, Item -1,PWD SOR Vol-II w. e. f. 1.11.2017 |
| 62 | Add 18 % GST |
| 63 | Construction of chamber for 100mm sluice plates |
