|
| 1 | Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer\"s specification as per direction of Engineer-in-Charge all complete.With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles |
| 2 | Supplying, cutting & fixing Machine cut kota stone slab flooring 40 to 50 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. M&L |
| 3 | Supplying & laying Screed bed or bedding layer of cement mortar 15 mm thick in 1:4 ratio for laying floor finishes including preparatory work like chipping, cleaning of surfaces. |
| 4 | Supplying, fixing including cutting to required size Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match |
| 5 | Rendering 12mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6. M&L |
| 6 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 7 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. after preparation of new surfacesl M&L |
| 8 | Supplying , cutting to required size, fitting Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Grafe Fe 410 -W (Gde-E- 250) quality A. M&L |
| 9 | Supplying & fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. M&L |
| 10 | Suplying & applying doublecoatsynthetic enamel paint over a coat of Red Oxide, Zinc Chrome primeron steel surfaces after preparation of new surface. M&L |
| 11 | Suplying & applying one coatsynthetic enamel paint on steel surfaces after preparation of old surface. M&L |
| 12 | Supplying fitting & fixing 750 Liter capacityRotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position. |
| 13 | Supplying & fitting 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 14 | Supplying, fitting 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight- 2 1 0 g m s) |
| 15 | Supplying & fitting 25mm dia steel Tubes Medium grade galvanised, with all fitting and fixed complete to walls, ceilings or laid in floors or connecting with existing water pipe line. M&L |
| 16 | Supplying & fitting 20mm dia steel Tubes Medium grade galvanised, with all fitting and fixed complete to walls, ceilings or laid in floors or connecting with existing water pipe line. M&L |
| 17 | Supplying and laying Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including sand screed bed. M&L. Complete in all respect including cutting to required size jointing, levelling etc. Proper gradient to be maintain for removal of surface water to the near by drain. |
| 18 | Casting Cement concrete in foundations, filling and mass concrete. Typr B2, 1:2:4, 40mm graded aggregate. M&L |
| 19 | Supplying & Laying Bricks, sub class B, laid flat, in floors, old size bricks. M&L |
| 20 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil.. |
| 21 | Providing precast cement concrete solid building blocks or slabs 7.50cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls. Type-B-1, 1:2:4 (20mm graded aggregate) |
| 22 | Excavating in trenches, in soft and loose soil n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out including removing excavated material n exc 50m & depositing where directed. |
| 23 | Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6mmean radius built in cement mortar 1:6 M&L |
| 24 | Rendering 12mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6 .Additional thickness is provided as floating/setting coat→ M&L |
| 25 | Demolition of following existing structures of any description and nature at any place and position including cleaning and shifting the debris.(A) BRICK WORK built in Cement Mortar |
| 26 | CONTRACTR\"S PROPERTY.The demolished brick work will be the contractor\"s property. |
