Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m (One point five metre ) in width or 10 sqm ( Ten square metre ) on plan), including dressing of sides and ramming of bottoms, lift upto any heightincluding getting out the excavated soil and disposal of surplus excavated soil as directed, with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 2 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms,upto any depthincluding getting out the excavated soil, and then returning the soil as required, in layers any depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, Pipes, cables etc, not exceeding 80 mm dia (eighty millimeter diameter) in all kinds of soil including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 3 | Cutting in earth work and disposal of excavated earth upto all leads and lifts in pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto breaking with breaker any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth through all modes oftransportation. Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all cases. including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 4 | Stone soling/boulder filling dry hand packed in under floor including centring, shuttering and propping completeincluding entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government excluding GST. |
| 5 | Coursed rubble masonry (second sort) with hard stone of approved qualityin foundation & plinth with Cement mortar 1:5 (onecement : five coarse sand) andcuringcomplete including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 7 | a) Foundations, footings, bases of columns, etc. for mass concrete |
| 8 | c) Columns, Pillars, Piers, Abutments, Posts and Struts |
| 9 | d) Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 10 | g) Stairs, (excluding landings) except spiral stair cases |
| 11 | (e)Flat surfaces such as soffits of suspended floors, roofs, landings and the likeFloors etc upto anythickness. |
| 12 | f) Edges of slabs and breaks in floors and walls under 20cm wide . |
| 13 | (g)Vertical surface such as walls(any thickness) and the like including attached pilasters, buttersses plinth and string courses and the like |
| 14 | Providing and layingin positioncement concrete of specified grade mechanically mixedcement concrete 1:3:6 (One cement: three sand:six graded/crushed stone aggregate 20mm (twenty millimetre) nominal size) as per specificationand curing complete but including cost of form work in all work upto all level including all heights/depths including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 15 | Providing and layingin positioncement concrete of specified grade mechanically mixedcement concrete 1:4:8 (One cement: four sand : eight graded/crushed stone aggregate 40mm (forty millimetre) nominal size) as per specificationand curing complete but including cost of form work in all work upto all level including all heights/depths and other including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 16 | Providing and laying in position cement concrete 1:5:10 (onecement : fivecoarse sand): ten graded stone aggregate 40 mm ( fortymillimetre ) nominal size of specified grade)excluding the cost of centering and shuttering andcuringcomplete in all work upto all level including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 17 | Providing and laying in position machine batched and machine mixed design mix Providing M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.: All works upto plinth level with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 18 | Providing and laying in position machine batched and machine mixed design mix Providing M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.: All works above plinth level up to Floor-V Level ithin all leads and lifts includingcarriage of materials in all respect andas per direction of Engineer-in-charge. |
| 19 | Providing and laying reinforced cement concrete 1:1.5:3 (one cement : one and half Sand :three graded stone aggregate 20mm (twenty millimetre) nominal size) mechanically mixed and vibrated to give an smooth and even surface includingcentring and shuttering etc upto all levelbut excluding cost of reinforcement in String courses, copings, bed plates, anchor blocks, plain windows sills and the likeasperthe directions of Engineer-in-Charge including carriage of materials with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 20 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm (twenty millimetre)nominal size) within all leads and lifts includingcarriage of materials in all respect andas per direction of Engineer-in-charge.and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 21 | Providing, hoisting and fixing above plinth level up to floor all level precast reinforced cement concrete in mouldings as in cornices, windows sills etc,including setting in cement mortar 1:3 (one cement : threecoarse sand) including cost of required centering, shuttering but, excluding the cost of reinforcement, with1:1.5:3 (onecement : one and halfcoarse sand: three graded stone aggregate 20 mm(twenty millimetre)nominal size)including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 22 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. (one hundred millimetre dia)R.C.C. pipe with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 23 | Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement: six sand : Twelve graded/crushed stone aggregate 20mm (twentymillimetre) nominal size upto all levelwith cement mortar 1:6 (one cement : six sand) and curing complete including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 24 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up toall floorlevel in all shapes and sizes in cement mortar 1:6 (onecement : six sand) curing complete including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 25 | Half brick masonry with common burnt clay F.P.S. (non modular) of class designation 7.5 inCement Mortar 1:3 (One cement: three sand) and curing completein super structure above plinth level upto all floor level including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 26 | Making plinth protection 50mm ( Fifty millimetre ) thick of cement concreten1:3:6 (One cement : Three coarse sand (zone - III) : Six graded stone aggregate 20 mm ( Twenty millimetre ) nominal size) over 75mm ( seventy five millimetre ) thick bed of dry brick ballast 40 mm ( Forty millimetre )nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 27 | Constructing Course rubble hammer dressed \"U\" shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement :6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, (one thousend xfour hundred fifty x fifty millimetre)reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm (fifty millimetre)dia perforations @ 100 to 125 mm (one hundred to one hundred twenty five millimetre) c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm (fifty x one point six millimetre) complete, all as per direction of Engineer-in-charge.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 28 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all level complete including cost of binding wire up to anylevel. Thermo Mechanically Treated bars of grade Fe-500D or more as perthe directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals . including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 29 | Providing and mixing water proofing materialsi.e. DR. FIXITPIDIPROOF LW+ in cement mortar in proportion recommended by the manufacturers. or its equivalent within all leads and lifts and carriage of material as per direction and entire satisfaction of the Engineer-in-Charge.with in all leads, lifts and other incidentals . including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 30 | Providing and fixingrailing for ramp or stair cases with ballusters of 20 mm x 20 mm (twenty millimetrextwenty millimetre)& 12 mmx 12 mm (twelve millimetre x twelve millimetre)M.S soildsquare bars in combination with M.S flat of 20 mmx 5 mm (twenty millimetre x five millimetre) with required interval inhorrizontal , top and middle of ballusters& average height of railing 0.85 metre including painting of the samewith in all leads, lifts and other incidentals . including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 31 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing staircase railing and similar works, including applying priming coat of approved steel primer.M.S. tube with in all leads, lifts and other incidentals . including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 32 | Providing and fixing 65 mm x 75mm (sixty five millimetre into five into seventy five millimetre) hand rails in 1st class Indian teak wood straight length completeincluding carriage of materials with in all leads, lifts and other incidentals . including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 33 | Providing and fixing ISI marked flush door shutters conforming to IS :2022(Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 (Three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm (thirty five millimetre)thick including ISI marked stainless steel butt hinges with necessary screws complete including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by theGovernment excluding GST. |
| 34 | Extra for providing lipping with 2nd class teak woodbattens 25 mm (twenty five millimetre) minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by theGovernment excluding GST. |
| 35 | Extra for providing Rectangular or square vision panel not exceeding 0.1 sqm (zero poin one square metre)in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured). with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by theGovernment excluding GST. |
| 36 | Providing and fixing double glazed hermetically sealed glazing in Wooden windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm (twelve millimetre) air gap, with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by theGovernment excluding GST. |
| 37 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.: 35 mm (thirty five millimetre)thick including ISI marked Stainless sqm Steel butt hinges with necessary screws With inside lining of PGI sheet.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by theGovernment excluding GST. |
| 38 | Providing 40x5 mm (forty x five millimetre) flat iron hold fast 40 cm (forty centimetre) long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty xthirty xfifty centimetre) 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm (twenty millimetre) nominal size). with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by theGovernment excluding GST. |
| 39 | Providing and fixing M.S. Channel frames 75x40mm (seventy five xforty millim etre)for end frames and centre frame channels 75x40mm (seventy five x forty millim etre)with MS flat/ plate 75x5mm (seventy five x five millimtre) in combination welded together to make one frame as per detailed drawingincluding bright finished or black enamelled mild steel butt hinges 100x58x1.90 mm (one hundredx fifty eightx one point ninety millimetre)with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by theGovernment excluding GST. |
| 40 | Providing and fixing 16 mm (sixteen millimetre)M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by theGovernment excluding GST. |
| 41 | Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, Stainless steel pipe 25 mm dia. (heavy type) curtain rod with Stainless steel Brackets for curtain rod 25 mm, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete..with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by theGovernment excluding GST. |
| 42 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 100 mm .with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST.. |
| 43 | Providing and fixing Stainless Steel hard drawn hooks and eyes 200 mm ( two hundredmillimetre ) including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 44 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg (thirty five kilograme) and door width upto 700 mm), with necessary accessories and screws etc. complete.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 45 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. .with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 46 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (Ten)as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 47 | 125mm ( One hundred twenty five millimetre ) |
| 48 | 100mm ( One hundredmillimetre ) |
| 49 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 50 | 250x10 mm( two hundred fifty x ten millimetre ) |
| 51 | 150x10 mm( one hundred fifty x ten millimetre ) |
| 52 | Providing and fixing angle iron doorframes manufactured from M.S.Angle iron section 25X25X5mm (twenty five x twenty five x five millimetre)thickness including hinges jamb,lock jamb,beed and ifrequired angle thrashold of mild steel angle 25X25 mm(twenty five x twenty five millimetre )welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface as per direction of Engineer-in-charge including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 53 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 54 | Steel work welded in built up sections/ framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in Grating frames, guard bar, ladder railing, brackets, gates and similar work. including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 55 | Providing and fixing M.S. BP Sheet 1.66mm( One point six six millimetre )to 2mm ( Two millimetre )thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 56 | Grill:providing and fixing Grill made of 8 mm (eight millimetre)sq. MS Bars welded at 150mm (one hundred fifty millimetre) center-to-center to 6mm x 12mm (six millimetre xtwelve millimetre)MS flat. Total grill unit should be powder coated and fixed to window frame with screws.complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 57 | Providing and laying antiskid exterior grade vitrified floor tiles of thickness 15mm ( Fifteen millimetre ) with water absorption less than 0.08% ( Point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty millimetre )thick cement mortar 1:4 (One cement : Four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( Three point three kilogramme/square metre )including grouting the joints with white cement and matching pigments etc., complete Size of Tile 450 x 450 mm ( Four hundred fifty x Four hundred fifty millimetre) with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 58 | Providing and fixing 1st (First) quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick ( Twelve millimetre )bed of cement Mortar 1:3 (One cement: Three coarse sand) and jointing with grey cement slurry @ 3.3kg ( Three point three kilogramme/square metre ) per sqm including pointing in white cement mixed with pigment of matching shade complete.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 59 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x 9.8mm( threehundred xthreehundred x nine point eightmillimetre) OF KAJARIA / ORIENT BELL/ AGL / SOMANY makehavingwater absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm ( twenty millimetre)thick base of cement mortar 1:4 (onecement :four coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. completeincluding entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 60 | Providing and fixing White glazed tiles 30x60 cm(thirty xsixty centimetre) of approved Shade and manufacturer in skirting risers of steps and dado 12 mm (twelve millimetre)thick cement mortar 1:3(1 cement :3 sand) and jointed with cement slurry. as per directionof Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals..with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 61 | Providing and laying antiskid exterior grade vitrified floor tiles of thickness 15mm ( Fifteen millimetre ) with water absorption less than 0.08% ( Point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty millimetre )thick cement mortar 1:4 (One cement : Four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( Three point three kilogramme/square metre )including grouting the joints with white cement and matching pigments etc., complete Size of Tile 450 x 450 mm ( Four hundred fifty x Four hundred fifty) with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 62 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm(Eighteen millimetre )thick stone slab over 20 mm ( twenty millimetre )(average) thick base of cement mortar 1:4 (One cement : Four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, ElitenBrown, Cat Eye or equivalent with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 63 | Providing edge moulding to 18 mm (eighteen millimetre)thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.: Granite work.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 64 | Providing and fixing 15 cm (fifteen centimetre)wide, 45 cm (forty five centimetre)overall semicircular pre-painted plainsheet 0.6 mm (zero point six millimetre) thick gutter with iron brackets 40x3mm (forty xthree millimetre) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 65 | Providing flat iron brackets 50x3 mm (fifty x three millimetre) size with necessary bolts, nuts and washers etc. for fixing G.S. sheets gutters with purlins with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 66 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre)gap for thermal expansion, (i) Single socketed pipes.110 mm (one hundred ten millimetre) diameter with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 67 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigidmoulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 68 | coupler 110mm ( One hundred ten millimetre ) |
| 69 | Bend 87.5° 110mm bend( One hundred ten millimetre ) |
| 70 | Shoe 110mm( One hundred ten millimetre ) |
| 71 | Providing and fixing to the inlet mouth of rain water pipe cast iron gratin g 15cm (fifteen centimetre) and waighting not less then 440 grams (four hundred forty grammes) |
| 72 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty x fifty x fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.:110 mm with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 73 | Providing and fixing 0.62 mm (zero point sixty two millimetre)thick prepainted steel sheetroofing, with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 74 | Providing and fixing prepainted ridges or hips 60 cm (Sixty centimeter) overall with 0.60 mm (Zero point sixty millimeter) thick preprinted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat or regular modified polyester organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyester of 5 (Five) microns over 5 (Five)microns primer coating including fixing with preprinted iron J or L hooks, bolts & nuts 6mm(Six millimeter) dia and preprinted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Chargeincluding carriage of materials within all leads, lifts and other incidentals.with prepainted limpet and rubber washers complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 75 | Providing and fixing valley 90 cm (ninety centimetre) overall 0.60mm (zero point sixty millimetre)thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 76 | 15mm (fifteen milimetre) cement plaster in single coat on the fairside of brick/ concrete/ stone walls for interior plastering up to all floor level includingarises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm(eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:six sand)as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.Upto Floor V Level .with prepainted limpet and rubber washers complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 77 | 15mm (fifteen milimetre) cement plaster in single coat on therough side of brick/ concrete/ stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:6 sand) as per the direction of Engineer-in-Charge including carriage of materials within all leads, and lifts other incidentals.Upto Floor V Level with prepainted limpet and rubber washers complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 78 | 6mm (Six millimeter) cement plaster to ceiling in cement mortar 1:3 (one Cement : three Sand) as per the directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other ncidentals.with prepainted limpet and rubber washers complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 79 | Painting Steel work with Deluxe Multi Surface paint to give an even shade with Two or more coat applied @ 0.90 ltr/ 10 sqm (zero point ninezero liters per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (One point eight zeroliters per ten square metre) of approved brand and manufacture, including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 80 | Providing and applying white cement based putty of average thickness 1 mm (one millimeters) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 81 | Providing and fixing12mm (twelve millimetre)thick green chalk board(non-magnetic) with superior quality framing specially anodized aluminium profile 20x15mm (twenty x fifty millimetre)with corners of specified plastic shall be provided. The board surfacr shall be non-porous ceramic particles on the top screen surface for smooth writing with chalk over 11mm thick particle board which shall have basing material of galvanized steel 0.28mm (zero point twenty eight millimetre)thick. The board shall be fixed on the wall with specially designed \"J\" clamps and square clamps with the help of nylon sleeves and screws as per site requirement complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 82 | Distempering with oil bound washable distemper of approved brand and manufacture (Nerolac, Asian Paints or its equivalent)to give an even shadewith prepainted limpet and rubber washers complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 83 | Finishing walls with water proofing cement paint of required shade on new work (Two or more coats applied @ 3.84 kg/10 sqm) ( three point eight fourkilogrampertensquare metre) complete as per the directions of Engineer-in-Charge including entire carriage of material through all mode of transporationswith in all leads lifts and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 84 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour:Two coats.with prepainted limpet and rubber washers complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 85 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima)or its equivalent on undecorated wall surface in two or morecoats to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sandpapered smooth complete, including entire carriage of material through all mode of transporationswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,or other taxes imposed by theGovernment excluding GST. |
| 86 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 including carriage of material within all leads and lifts and other incidentals.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 87 | Providing and fixingPVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete/includingfixing with approved adhesive etc. completeas per the direction of Engineer-in-charge including carriage of materials with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 88 | Providing weep holes in brick masonry/ stone masonry plain reinforced concrete retaining/ breast wall with 100mm (one hundred millimetre) dia PVC pipe extending through the full with of the structure with slop of 1 (V):20(H) towards drawing face complete as per drawing and technical specification within all leads and lifts and other incidentals.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 89 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred ten millimetre) within all leads and lifts and other incidentals.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 90 | 150 mm dia.( One hundredfiftymillimetre ) |
| 91 | 110 mm dia.( One hundred ten millimetre ) |
| 92 | 75 mm dia.( seventyfive millimetre ) |
| 93 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm (twenty five to forty millimeters) nominal bore including entire carriage of material through all mode of transporationswith in all leads, liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 94 | Supplying and fixing C.I. cover without frame for manholes 455x610 mm (four hundred fifty five xsix hundred ten millimetre)rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg (twenty three kiligramme) with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 95 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work:-with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 96 | 15 mm nominal bore(fifteenmillimetre ) |
| 97 | 20 mm nominal bore ( twentymillimetre ) |
| 98 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre (one metre) spacing. This includes the costs of cutting chases and including testing of joints complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 99 | 1216 (16 mm OD) pipe( sixteen millimetre ) |
| 100 | 1620 (20 mm OD) pipe( twentymillimetre ) |
| 101 | Providing and placing on terracepolyethylene water storage tank, IS : 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 102 | Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm (five hundred eighty into four hundred forty millimetrers) with integral type foot rests water closet squatting pan (Indian type W.C. pan) of Parryware, Hindware Sanitaryware, Neycer, Cera. make with 100 mm (one hundred millimetrers) sand cast Iron P or S trap, 10 (ten) Litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever equired upto all floor levels in all heights/depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality. Malkana, toll tax, sale tax, but excluding GST. |
| 103 | Providing and fixing wash basin Cat. No. S2040102of size 45x35 cm (forty five x thirty five centimetre) of CERA of approved shade with C.I. brackets, 15 mm(fifteen millimetre) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 104 | Constructing masonry Chamber 30x30x50 cm (thirty x thirty xfifty centimrtre) inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (one hundred x one hundred x fifty millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 105 | Providing and fixing 600x450 mm (six hundred x four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 106 | Providing and fixing 600x120x5 mm (six hundred xone hundred xfive millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimetre) long screws, rawl plugs etc., complete.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 107 | Providing and fixing PTMT liquid soap container 100 mm (one hundred millimetre) wide, 125 mm (one hundred twenty five millimetre) high and 112 mm (one hundred twelve millimetre)distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms :Kent touchless Sanitiser/ Liquid soap Dispenser-1000 ml,(one thousend millilitere) white.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 108 | Providing and fixing PTMT soap Dish Holder having length of 138mm, (one hundred thirty eight millimetre)breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms: (one hundred six grammes)Soap dish recessed type stainless steel No. 1531of Hotelier Series of JAQUAR or ESS - ESS.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 109 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 110 | Providing and fixing 115 mm (one hundred fifteen millimetre) nominal bore, 86 mm (eighty six millimetrte) long, weighing not less than 88 gms PTMT concealed stop cock with flange of Jaguar andapproved quality and colour as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 111 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1.0 metre (one metre ) long with S.S. triangular plate to Eureopean type W.C. of quality and make with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 112 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 113 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45cm (forty five centimetre) length 15 mm (fifteen millimetre)nominal bore with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 114 | Providng and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) of 25 mm nominal bore with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 115 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal borewith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 116 | Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm (one hundred x ninety millimetre) with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 117 | Providing and fixing brass ferrule with C.I. mouth coverincluding boring and tapping the main 15 mm nominal bore with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 118 | Providing and fixingPVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete/includingfixing with approved adhesive etc. completeas per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 119 | 150mm diaOne hundred fiftymillimetre ) |
| 120 | 110mm dia One hundredtenmillimetre ) |
| 121 | 75mm dia (fifteenmillimetre ) |
| 122 | Providing and fixing a PVCplain bendsISI markedincludingfixing with approved adhesive etc. completeas per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentalswith in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 123 | 150mm dia One hundred fifty millimetre ) |
| 124 | 110mm dia One hundred n ten millimetre ) |
| 125 | 75mm dia (seventyfive millimetre ) |
| 126 | Providing and fixing PVC door bend with oval access door insertion rubber washer 3 mmThree millimetre) thick bolts and nuts ISI market completeincluding fixing with approved adhesive etc. completeas per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 127 | 150mm dia One hundred twenty five millimetre ) |
| 128 | 110mm dia One hundred twenty five millimetre ) |
| 129 | 75mm dia One hundred twenty five millimetre ) |
| 130 | Providing and fixingPVC CowlISI markedincluding fixing with approved adhesive etc. complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 131 | 150mm dia One hundred fiftymillimetre ) |
| 132 | 110mm dia One hundred tenmillimetre ) |
| 133 | 75mm dia (Seventy Fivemillimetre ) |
| 134 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty x fifty x fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 135 | 75mm dia (seventyfive millimetre ) |
| 136 | 110mm dia (One hundred ten millimetre ) |
| 137 | 150mm dia (One hundred fifty millimetre ) |
| 138 | Providing and fixing PTMT grating of approved qualityfor floor, gully or nahani trap with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 139 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 140 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm ( Three hundred X three hundred millimetre)size (inside) the weight of cover to be not less than 4.50 kg (four point five hundred kiligrame) and frame to be not less than 2.70 kg (two point seven kilograme)as per standard design: with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 141 | Constructing brick masonry circular type manhole 0.91 mtr. (zero point ninety one metre0 internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
| 142 | 0.91 m( Zero point ninety one metre) deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter con- forming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : |
| 143 | with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 144 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm (thirty two millimetre) dia. as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax or other taxes imposed by theGovernment, but excluding GST. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
