}

Tender For Construction Of Teen Shade At Vill Driyapur Block Sumerpur Hamirpur. - Clearing Of Jungle Including Up Rootingof Trunkvegetarian Grass Bushetc Dsr 2.32 2 Earth Work By Mechinical / Manual Means In Rough Excavation, Banking Excavated Earth In , kanpur-Uttar Pradesh

Uttar Pradesh Small Industries Corporation Limited has published Tender For Construction Of Teen Shade At Vill Driyapur Block Sumerpur Hamirpur. - Clearing Of Jungle Including Up Rootingof Trunkvegetarian Grass Bushetc Dsr 2.32 2 Earth Work By Mechinical / Manual Means In Rough Excavation, Banking Excavated Earth In . Submission Date for this Tender is 10-05-2025. Shed Construction Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

49020052
Tender For Construction Of Teen Shade At Vill Driyapur Block Sumerpur Hamirpur. - Clearing Of Jungle Including Up Rootingof Trunkvegetarian Grass Bushetc Dsr 2.32 2 Earth Work By Mechinical / Manual Means In Rough Excavation, Banking Excavated Earth In
Tender
Indian
Uttar Pradesh
Kanpur
10-05-2025

Tender Details

Tender For Construction Of Teen Shade At Vill Driyapur Block Sumerpur Hamirpur. - clearing of jungle including up rootingof trunkvegetarian grass bushetc DSR 2.32 2 Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift:D.S.R Code No-2.8.1 3 Earthwork in cutting or filling in ordinary soil form 3k.m.i/c all complete work 4 Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.DSR.2.27 5 P/L in position cement concrete of specified grade excluding the cost of Centering and shuttering all work upto plinth level 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from Natural sources:8 graded stone aggregate40 mm nominal sizederived from Natural sources .D.S.R Code No-4.1.8 6 M-150 brick work in 1:6Cement & C. Sand Mortar in Foundation and plinth…Complete Item. D.SR-6.1.2 7 12 mm cement plaster thick 1:4 cement and coarse sand fair side single and half brick wall including internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth. DSR No-13.4.1 8 Providing and laying of 8 to 10 mm thick ivory or light shade vitrified tiles of 600 mm x600 mm size in flooring or skirt ing laid with 1:3 cement mortar (1 cement :3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T &P required for proper completion of work. DSR .11.41.2 9 Providing and laying in position specified grade of reinforcement cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement of R.C.C 1:1.5:3 with cement coarse sand .column T beam slab as DSR NO-5.1.2 10 M.S (Tor steel or plain ) in plain work such as R.C.C or R.B work including cutting / bending for proper shape as necessary including supply of all steel & wastage ,bend ,hook & authorised overlapping shall be measured … complete item.DSR 5.22.1 11 Cement concrete floorig 1:2:4 ( 1 cement 2 coarse sand 4graded stone aggregate) finished with a floating coat of neat cement,including cement slurry,excluding the cost of nosing of steps etc complete 40 mm thick with 20 mm nominal size stone aggregate DSR.11.3.1 12 Steelwork inbuilt up Tubular(round,square or ractangular hollow tubes etc)Trusses etc including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer includingweldingand bolted with with special shaped washers etc all complete.DSR-10.16.2 13 S/F Of MS J-hook 16 mm dia i/c all complete work 14 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(0.63 mm thick sheet) DSR.12.1.3 15 Finishing walls with two coat ofPremium acrylicemulsion smooth exterior paint of best quality supply of all materials,labour and T&P etc DSR NO 13.48.A.1 16 Painting with synthatic eleamin Paint of Approved and manufactore of reqquierd colour to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture DSR.13.62.1 17 S/F of 4x2.5 feet size granite stone at siteincluding writing etc complete in all respect

Key Value

Document Fees
INR 1180 /-
EMD
INR 10600.0 /-
Tender Value
INR 10.53 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail